Very useful tool for fixing the flywheel.
The flywheel stopper can be used on all Bosch and Ducati flywheels, as well as those with the same masses.
Stable construction made of galvanized steel. Comfortable rubber grip.
Ø outer plate: 93 mm
Ø inner plate: 51 mm
Pin spacing: 68 mm
Ø pins: 8 mm
Pin length to heel: 5.5 mm
Figure 3 shows the application of the tool.
Exceptional product for the highest demands of the quality brand swiing®.
| Ø Pin | 8 mm |
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | galvanized (blue), rubberized |
| Diameter | 19 mm |
| Ø inside | 27 mm |
| Number of components | 1 pcs |
| Height | 80 mm |
| Total length | 290 mm |
| Ø outside | 93 mm |
| Thickness | 5 mm |
| Area of application | Special tool |
| Universal | |
| Puch | |
| Sachs | 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 50/5 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 505 (with pedal shaft) - 1A (AT), 2A (HG) 535 |
| Zündapp Belmondo | |
| Zündapp | 247 Motor |
Accessories & related products
HPI flywheel (Bosch/Ducati)
Manufacturer: HPI · Material: Steel · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Ø Flywheel outside: 71.5 mm · Cone length: 28 mm · Cone ratio: 1:5 · Thread type: MF27x1 LH (fine/left-hand thread) · Weight: 337 g
EUR 117.10
Bosch flywheel clockwise NOS | Puch E50
Thread length: 6.5 mm · Manufacturer: BOSCH · Material: Steel · Thread type: MF26x1.5 (fine pitch thread) · Direction of rotation: right · Ø cone small inside: 11.9 mm · Ø cone large inside: 15 mm · Weight: 900 g · Cone length: 17.8 mm · Cone ratio: 1:5 · Height: 36.6 mm · Ø Internal flywheel: 91.2 mm · Ø Flywheel outside: 115.8 mm
EUR 262.40
Moped fans also bought
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Area of application: (Dis)assembly tool · Width across flats Screw: 19 mm · Strength class: 8.8 · Number of components: 1 pcs
EUR 12.10
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats (trigger): 8 mm · Width across flats (trigger): 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Area of application: (Dis)assembly tool · Surface: galvanized (blue) · Number of components: 1 pcs · Total length: 120 mm · Diameter: 24 mm · Diameter: 40.3 mm · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread)
EUR 53.60
GPO piston stopper M14x1.25
Manufacturer: GPO · Area of application: Special tool · Material: Steel · Surface: galvanized (blue) · Diameter: 12 mm · Diameter: 16 mm · Thread type: MF14x1.25 (fine pitch thread) · Width across flats SW: 17 mm · Total length: 83 mm · Number of components: 1 pcs
EUR 11.60
GPO clutch trigger M27x1.25, M20x1 | Sachs 503, 50/2, 50/3, 50/4
Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Material: Steel · Surface: blackened · Thread type: MF20x1 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Total length: 57 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool
EUR 24.30
swiing® revival clamping device clutch | Sachs 503, 50/2, 50/3, 50/4
Material: Aluminum · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Manufacturer: swiing® revival parts · Height: 16 mm · Number of components: 4 pcs · Area of application: Special tool · Thread type: M6x1 (standard thread) · Thread length: 40 mm · Ø inside: 64 mm · Ø outside: 75 mm · Sachs OEM no.: 0276 057 000
EUR 36.50
Not in stock
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Number of components: 7 pcs · Material: Steel · Surface: burnished · Total length: 130 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm · Area of application: (Dis)assembly tool
EUR 24.30
Collection only possible with online purchase and appointment.
