Clutch puller with thread protection sleeve for your Puch Maxi moped / moped with E50 engine.
The galvanized steel clutch puller is easy to use and a must for every Puch workshop.
Use the cheese head screws to secure the tool to the clutch pack. By screwing in the large hexagon head screw, you can remove the entire clutch.
You can find clutches and springs in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
| Surface | blackened |
| Manufacturer | GPO |
| Area of application | (Dis)assembly tool |
| Material | Steel |
Suitable for the following models
| Universal | |
| Puch | E50 |
Accessories & related products
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Total length: 28 mm · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Surface: coated · Color: blue · Number of components: 3 pcs · Ø inside: 4.8 mm · Ø outside: 8.3 mm
EUR 21.90
HK clutch "Racing" Aramid | Puch E50
Manufacturer: HK Clutches · Material: Steel · Material addition: Chrome steel (known as Nirosta®) · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs
EUR 366.80
Not in stock
HK clutch "Racing" (with additional weight) Aramid | Puch E50
Manufacturer: HK Clutches · Material: Aluminum · Material: Chrome steel (known as Nirosta®) · Area of application: High End · Area of application: Performance · Area of application: Racing · Material: Steel · Area of application: Tuning · Material addition: Composite materials · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Thickness: 21.2 mm
EUR 513.50
swiing clutch springs reinforced (+50%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Total length: 26.6 mm · Ø wire: 2 mm · Manufacturer: swiing · Material: Spring steel · Area of application: Tuning · Surface: coated · Color: red · Number of components: 3 pcs · Ø inside: 4.3 mm · Ø outside: 8.45 mm
EUR 21.90
swiing clutch springs reinforced (+60%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Total length: 26.9 mm · Ø wire: 2.05 mm · Manufacturer: swiing · Material: Spring steel · Area of application: Tuning · Surface: coated · Color: yellow · Number of components: 3 pcs · Ø inside: 4.3 mm · Ø outside: 8.45 mm
EUR 21.90
swiing® ingenious screw M12x1.25 x 51 hexagonal ball end & cap
Manufacturer: swiing® ingenious parts · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Thread length: 42 mm · Screw head: Hexagon · Width across flats SW: 19 mm · Drive: External hexagon · Area of application: Special tool · Area of application: Workshop accessories · Thread type: MF12x1.25 (fine pitch thread)
EUR 10.90
Moped fans like you also bought:
Clutch 3-jaw aluminum | Puch E50
Material: Aluminum · Area of application: Original · Area of application: Standard · Material: Steel · Material addition: Composite materials · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Thickness: 20.9 mm
EUR 61.00
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Total length: 28 mm · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Surface: coated · Color: blue · Number of components: 3 pcs · Ø inside: 4.8 mm · Ø outside: 8.3 mm
EUR 21.90
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Total length: 55 mm · Total length: 75 mm · Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Number of components: 1 pcs · Strength class: 8.8
EUR 10.90
EUR 12.10
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 12.10
GPO piston stopper M14x1.25
Diameter: 12 mm · Diameter: 16 mm · Total length: 83 mm · Manufacturer: GPO · Area of application: Special tool · Material: Steel · Surface: galvanized (blue) · Thread type: MF14x1.25 (fine pitch thread) · Number of components: 1 pcs · Width across flats SW: 17 mm
EUR 10.40
EUR 11.60
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Material: Sealing paper · Manufacturer: swiing® revival parts · Number of components: 1 pcs · Thickness: 1 mm · Color: sand-colored · Ø inside: 106 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.80
Not in stock
Collection only possible with online purchase and appointment.
