Racing clutch for all E50 input automatic engines, which are installed on Puch Maxi S / N mopeds / mopeds, among others.
The 3-jaw centrifugal clutch has lightweight aluminum linings. As a result, the engagement point is higher than with original clutch linings.
In addition, the wear of the friction linings is significantly lower due to the lower weight.
Please select the desired clutch springs in the selection field.
Note: Due to the later engagement point, this clutch cannot be used with an original, sealed cylinder.
The clutch is suitable for cylinder kits up to 44 mm in combination with the original or reinforced blue clutch springs. If you use larger cylinders or install even stiffer springs, wear will be increased and the clutch will wear out quickly.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
The set includes the following fixed parts:
Manufacturer: GPO · Material: Steel · Material addition: Aluminum, Steel · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Ø outside: 93.5 mm · Thickness: 21 mm · Area of application: Standard, Original, Performance, Tuning
Details
| Manufacturer | GPO |
| Area of application | Tuning |
| Material | Aluminum, Steel |
| Ø outside | 93.5 mm |
| Recording type | Cone mounting |
| Number of jaws | 3 pcs |
| Thickness | 21 mm |
| Number of springs | 3 pcs |
Suitable for the following models
| Puch | E50 |
Accessories & related products
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Color: blue · Surface: coated · Ø outside: 8.3 mm · Number of components: 3 pcs · Ø inside: 4.8 mm · Ø wire: 1.7 mm · Total length: 28 mm
EUR 21.50
HK clutch "Racing" Aramid | Puch E50
Manufacturer: HK Clutches · Material: Steel · Material addition: Chrome steel (known as Nirosta®) · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 360.70
Not in stock
swiing® revival gearbox cover gasket 0.3 mm engine | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Number of components: 1 pcs · Ø inside: 106 mm · Thickness: 0.35 mm · Number of fixing points: 4 pcs · Puch OEM number: 349.1.10.349.1
EUR 2.90
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Number of components: 1 pcs · Ø inside: 106 mm · Thickness: 0.5 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 3.50
Moped fans like you also bought:
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Color: blue · Surface: coated · Ø outside: 8.3 mm · Number of components: 3 pcs · Ø inside: 4.8 mm · Ø wire: 1.7 mm · Total length: 28 mm
EUR 21.50
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Decompressor: Yes · Hole spacing inlet: 32 - 38 mm
EUR 11.90
Hot 
swiing 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Material: Aluminum · Nominal diameter: 15 mm · Carburetor type: SRE · Total length: 66 mm · Choke control: Hand choke · Width: 50 mm · Height: 95 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 96.10
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Number of components: 1 pcs · Ø inside: 106 mm · Thickness: 0.5 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 3.50
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Number of components: 1 pcs · Ø inside: 106 mm · Thickness: 1 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.70
Collection only possible with online purchase and appointment.
