Simple and ingenious tool for driving out or pulling out the piston pin on your moped, moped or small motorcycle
.The scope of delivery includes three different pull rods for removing 10, 12 and 14 mm piston pins
Why this tool: To loosen a stuck piston pin, many people drive the pin out with a suitable iron and hammer blows. The problem with this is that the connecting rod bearing can be damaged during such an operation! With this tool, the piston can be driven out in a targeted manner and no forces are exerted on the connecting rod bearing. If you can avoid such damage even once, the purchase of this tool is worthwhile.
| Total length | 130 mm |
| Width across flats | 10 mm, 17 mm |
| Manufacturer | GPO |
| Number of components | 7 pcs |
| Material | Steel |
| Surface | burnished |
| Diameter | 10 mm, 12 mm, 14 mm |
| Area of application | (Dis)assembly tool |
| Universal | |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 50/5 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT), 2A (HG) 508 - 1 A 535 |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta various Beta 521 (engine) |
| Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo |
| Zündapp Belmondo | |
| Solex | |
| Tomos | |
| Bye Bike | |
| Alpa Chopper / Turbo |
| Cilo | |
| DKW | |
| Fantic | Issimo |
| Garelli | |
| Honda | |
| Hercules | |
| ILO / JLO | |
| Kreidler | Flory MF Foil |
| Malaguti | |
| MBK / Motobécane | |
| Miele | |
| --- PLEASE USE --- | |
| Monark | |
| Peugeot | |
| Victoria | |
| Yamaha | |
| Zündapp | 434 Chassis (mountaineer) 278 Motor |
Ratings
Accessories & related products
swiing® ingenious connecting rod bushing assembly tool
Manufacturer: swiing® ingenious parts · Area of application: (Dis)assembly tool · Material: Aluminum · Material: Steel · Surface: anodized · Number of components: 9 pcs · Diameter: 20 mm · Ø inside: 14.25 mm · Ø inside: 15.25 - 14.25 mm · Ø outside: 9.2 mm · Ø outside: 11.8 mm · Ø outside: 11.9 mm · Ø outside: 13.9 mm · Ø outside: 14.8 mm · Width across flats: 13 mm · Width across flats: 17 mm
EUR 47.60
Moped fans also bought
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Total length: 55 mm · Total length: 75 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Number of components: 1 pcs
EUR 12.10
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Diameter: 24 mm · Diameter: 40.3 mm · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Width across flats trigger: 8 mm · Width across flats trigger: 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Total length: 120 mm · Area of application: (Dis)assembly tool · Surface: galvanized (blue) · Number of components: 1 pcs
EUR 53.70
GPO clutch trigger M27x1.25, M20x1 | Sachs 503, 50/2, 50/3, 50/4
Thread type: MF20x1 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Strength class: 8.8 · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Total length: 57 mm
EUR 24.40
swiing® revival clamping device clutch | Sachs 503, 50/2, 50/3, 50/4
Manufacturer: swiing® revival parts · Area of application: Special tool · Material: Aluminum · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Number of components: 4 pcs · Height: 16 mm · Ø inside: 64 mm · Ø outside: 75 mm · Thread type: M6x1 (standard thread) · Thread length: 40 mm · Sachs OEM no.: 0276 057 000
EUR 36.60
Not in stock
swiing® revival puller clutch basket manual | Sachs
Thread type: MF12x1.25 (fine pitch thread) · Width across flats Screw: 19 mm · Manufacturer: swiing® revival parts · Thickness: 25 mm · Total length: 106 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Surface: galvanized (blue) · Number of components: 4 pcs
EUR 40.30
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Manufacturer: swiing® ingenious parts · Area of application: Special tool · Material: Steel · Surface: galvanized (blue) · Surface: rubberized · Number of components: 1 pcs · Total length: 290 mm · Height: 80 mm · Thickness: 5 mm · Diameter: 19 mm · Ø inside: 27 mm · Ø outside: 93 mm · Ø Pin: 8 mm
EUR 58.60
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing type: Deep groove ball bearing · Stock number: E15 · Ø inside: 15 mm · Ø outside: 35 mm · Width: 8 mm · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Thread type: MF20.8x1 LH (fine/left-hand thread) · Material: Steel · Area of application: High End · Area of application: Standard · Pony OEM number: A2531 · Sachs OEM no.: 0286 079 105
EUR 61.10
Collection only possible with online purchase and appointment.
