Winter Check-Up
Drives, brakes, steers – but better.
YSS shock absorber Racing 30 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Surface: varnished · Color: black · Damping type: Hydraulic (oil) · Adjustable: Yes · Ø outside: 52 mm · Ø Fastening inside: 10 mm · Ø spars: 32 mm · Total length: 335 mm · Mounting type: Nuts & bolts · Hole spacing: 330 mm · Number of fixing points: 2 pcs
EUR 171.50
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø External brake pads: 80 mm · Ø outside: 91 mm · Ø axle: 12 mm · Ø bore: 12.2 mm · Total length: 187 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Cranking (offset): 8 mm · Brake lever length (lever length): 55 mm · Ø screw holder: 6.5 mm
EUR 85.70
IMCA Shock absorber fork "Racing" chrome | Piaggio Ciao
Manufacturer: IMCA · Material: Steel · Damping type: Hydraulic (oil) · Adjustable: No · Surface: chrome-plated · Total length: 270 mm · Color: Chrome · Hole spacing: 170 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 104.10
Shock absorber 30 cm silver / black (pair) | Puch Maxi S, Supermaxi
Material: Aluminum · Material: Plastic · Material: Steel · Surface: coated · Color: black · Color: silver · Damping type: Spring · Adjustable: No · Ø outside: 38.2 mm · Ø Fastening inside: 8.1 mm · Ø spars: 25 mm · Total length: 300 mm · Total length: 330 mm · Mounting type: Nuts & bolts · Hole spacing: 300 mm · Number of fixing points: 2 pcs · Puch OEM number: 349.3.21.550.0 · Puch OEM number: 349.4.21.550.0
EUR 97.90
swiing® ingenious repair kit fork (selection) | Piaggio Ciao PX / C24
Manufacturer: swiing® ingenious parts · Material: Brass · Material: Chrome steel (colloquially known as stainless steel) · Material: Rubber · Material: Spring steel · Surface: electropolished · Color: Chrome · Color: black · Ø outside: 28.4 mm · Ø inside: 20 mm · Ø wire: 4.25 mm · Ø wire: 4.5 mm · Total length: 110 mm
EUR 75.90
swiing® ingenious steering bearing M26x1 (for Ø 30 mm steering head tube) High End
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: gas nitrided · Color: black · Bearing type: Bearing ring · Ø mounting frame: 30.3 mm · Ø outside: 43 mm · Ø inside: 26.8 mm · Thread type: MF26x1 (fine pitch thread)
EUR 67.30
EBR fork chrome reinforced | Puch
Manufacturer: EWC · Material: Steel · Surface: chrome-plated · Color: Chrome · Adjustable: No · Ø spars: 28 mm · Spar end distance (center-center): 140 mm · Ø outer head tube: 26 mm · Ø head tube inside: 22 mm · Head tube length: 180 mm · Total length: 580 mm · Fork bridge - center wheel axle: 381 mm · Distance brake cam to wheel axle center-center: 40 mm · Thread type: MF26x1 (fine pitch thread) · Thread length: 57 mm
EUR 162.90
swiing® revival fork repair kit | Puch
Manufacturer: swiing® revival parts · Puch OEM number: 349.1.30.820.1 · Puch OEM number: 349.1.30.117.1 · Puch OEM number: 349.1.30.137.1 · Puch OEM number: 349.1.30.135.1 · Puch OEM number: 349.1.30.126.1 · Puch OEM number: 349.2.30.134.1 · Puch OEM number: 367.1.30.031.1
EUR 110.20
Not in stock
Brake pads make all the difference
Brake pads transfer the force from your hand to the brake.
If they are too thin or glazed, braking performance is significantly reduced.
Typical signs:
- Long braking distance
- spongy pressure point
- Squeaking or rubbing
Replacing them is not rocket science, but it is important for safety.
Constant pressure point
Disc brakes brake significantly more evenly and efficiently than drum brakes.
Wet conditions and temperature hardly play a role.
Technically, this means:
- direct power transmission
- less fading
- better controllability
Winter is ideal for retrofitting because there is time for precise adjustment.
What the damper really does
The shock absorber keeps the wheel on the ground.
Not only does it provide suspension, it also stabilises the entire chassis.
If it is worn out or incorrectly adjusted,
- the rear end bounces
- the wheel loses grip
- and the handling becomes unstable
A functioning damper provides directional stability and a significantly more stable driving experience.
Hot 
Tivedens engine 41 mm cylinder kit S3 fan-cooled | Sachs 50/2 (DE), 50/3
Nominal diameter: 41 mm · Manufacturer: Tivedens Motor AB · Material: Gray cast iron · Surface: varnished · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 44 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 29.5 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Number of fixing points: 4 pcs · Thread outlet: MF40x1.5 (fine pitch thread) · Area of application: Tuning
EUR 355.30
Hot
Tivedens engine 41 mm cylinder kit S3 | Sachs 50/2 (DE), 50/3, 50/4
Nominal diameter: 41 mm · Manufacturer: Tivedens Motor AB · Material: Gray cast iron · Surface: varnished · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 44 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 29.5 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread) · Number of fixing points: 4 pcs · Area of application: Tuning
EUR 355.30
Hot
Tivedens engine 41 mm cylinder kit S4 | Sachs 50/2 (DE), 50/3, 50/4
Nominal diameter: 41 mm · Manufacturer: Barikite · Manufacturer: Tivedens Motor AB · Material: Gray cast iron · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 18 mm · Ø outlet inside: 30 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Number of fixing points: 4 pcs · Thread outlet: MF36x1.5 (fine pitch thread) · Area of application: Tuning
EUR 392.10
OMG fuel tap horizontal M12x1 (with union nut) outgoing at the bottom, metal lever | Puch Maxi S / N
Manufacturer: OMG · Material: Aluminum · Outer width: 18 mm · Possible lever positions: open / closed / reserve · Material lever: Aluminum · Filter type: Plastic net · Mounting type: screw in (thread) · Installation direction: vertical / vertical · Outlet direction: below · Thread type: MF12x1 (fine pitch thread) · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 60 mm · Puch OEM number: 349.3.22.030.0 · Puch OEM number: 349.4.22.030.0
EUR 15.80
Polini diaphragm block | Minarelli horizontal
Manufacturer: Polini · Material: Carbonite · Material: Plastic · Material: Steel · Number of flaps: 4 pcs · Membrane material: Carbonite · Thick membrane platelets: 0.35 mm · Total length: 38.9 mm · Width: 36.3 mm · Width: 39.7 mm · Hole spacing: 52.5 mm · Hole spacing: 62 mm · Width: 64.9 mm · Width: 75.2 mm · Hole pattern [mm]: 52.5 x 62 · Thread type: M6x1 (standard thread) · Thickness: 3.5 mm · Mounting type: Screws · Ø mounting hole: 6.4 mm · Number of fixing points: 4 pcs
EUR 42.80
swiing® revival screw set M8x22 cylinder head cast hub chrome | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm · Drive: Hexagon socket · Screw head: Cylinder head · Ø External head: 14.8 mm · Width across flats: 6 mm · Total length: 30 mm · Thread length: 22 mm · Color: Chrome · Number of components: 5 pcs · Puch OEM number: 321.1.40.205.1
EUR 28.10
Siggnature Tankbar
The legendary Tankbar at Siggnature Bikes in Saland.
Bar service, live music and food truck every first Friday of the month.
Friendly people, bikes and good conversation.
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
