Hot 
Fan-cooled 41 mm S3 (55 cc) racing kit suitable for your moped or small motorcycle with a Sachs 50/2 (DE) or 50/3 engine.
This tuning cylinder is a clear statement for anyone who wants real performance. Meticulously handcrafted by Tivedens Motor, this cylinder delivers uncompromising torque, crisp throttle response, and a riding experience that immediately impresses. Each individual cylinder is numbered and crafted with extensive experience, technical expertise, and a genuine passion for performance. Depending on the setup used, the manufacturer claims it can deliver 6.9–7.3 hp.
A racing cylinder for anyone who doesn’t want to spend time comparing options, but is looking for a part that works, delivers performance, and is simply fun. Install it, ride it, smile.
Scope of delivery as shown in Image 1.
Note: The cylinder is equipped with a large square intake port for a 17 mm carburetor and a large M40 exhaust thread. Please take this into account when selecting your additional components. Please observe the installation direction during assembly. The piston is installed with the arrow pointing toward the exhaust on the exhaust side.
You can find the matching cylinder head, mounting hardware, exhaust systems, and threadlocker in the accessories section.
Quality product from the Swedish manufacturer Tivedens Motor AB
| Manufacturer | Tivedens Motor AB |
| Material | Gray cast iron |
| Surface | varnished |
| Displacement | 55 ccm |
| Nominal diameter | 41 mm |
| Crankshaft stroke | 42 mm |
| Ø piston pin (B) | 12 mm |
| Ø cylinder neck | 44 mm |
| Ø Outlet outside | 40 mm |
| Ø outlet inside | 29.5 mm |
| Hole spacing inlet | 31 mm |
| Inlet window | 17 x 15 mm |
| Thread inlet | M5x0.8 (standard thread) |
| Number of fixing points | 4 pcs |
| Outlet type | Union nut |
| Thread outlet | MF40x1.5 (fine pitch thread) |
| Area of application | Tuning |
| Sachs | 50/2 50/3 50/4 |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.90
EUR 2’690.00/l
swiing® revival Stud Bolt M5x23 Inlet (Diaphragm) 10.9 | Sachs 50/2 (A3700)
Total length: 23 mm · Manufacturer: swiing® revival parts · Thread length: 6 mm · Thread length: 12 mm · Area of application: Standard · Material: Steel · Nominal diameter (thread): 5 mm · Surface: galvanized (blue) · Diameter: 4.9 mm · Thread type: M5x0.8 (standard thread) · Pony OEM number: A3700 · Sachs OEM no.: 0640 016 101 · Sachs OEM no.: 0640 016 102
EUR 2.20
swiing® revival bolt set cylinder head galvanized | Sachs 503 / 50/2 / 50/3 / 50/4
Manufacturer: swiing® revival parts · Number of components: 12 pcs · Material: Steel · Surface: galvanized (blue) · Color: silver · Drive: External hexagon · Total length: 34 mm · Screw head: Hexagon · Thread type: M6x1 (standard thread) · Shank: Yes · Ø shaft: 5.85 mm · Nominal diameter (thread): 6 mm · Thread length: 22 mm · Shank length: 8 mm · Width across flats: 10 mm · Strength class: 10.9 · Area of application: Standard
EUR 6.00
Exhaust set Sidepipe Ø 32 / 60 mm chrome | Sachs 50/2
Manufacturer: Made in Portugal · Material: Steel · Ø outside: 60 mm · Total length: 600 mm · Ø Internal connection: 32 mm · Ø Flame tube outside: 32 mm · Exhaust type: Sidepipe · Mounting type: Screwed clamp · Flame tube attachment: Flange
EUR 208.30
swiing® revival carburetor 17 mm Bing SSB 1/17/69
Material: Aluminum · Manufacturer: swiing® revival parts · Mounting type: Flange · Component group Carburetor: Carburetor complete · Area of application: Standard · Area of application: Tuning · Nominal diameter: 17 mm · Carburetor type: SSB · Width: 85 mm · Height: 100 mm · Total length: 132 mm · Ø fuel hose connection: 6 mm · Nozzle size: 76 · Hole spacing inlet: 31 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: without choke · Camouflaged: No
EUR 155.50
swiing® ingenious 41 mm cylinder head tuning | Sachs 50/2, 50/3, 50/4
Ø outside: 98 mm · Width: 95 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Ø cylinder: 41 mm · Total length: 127 mm · Ø screw holder: 19 mm · Height: 50 mm · Hole pattern [mm]: 37 x 37 · Candle thread: long · Number of fixing points: 4 pcs · Area of application: Standard · Decompressor: M10x1.5
EUR 84.00
swiing® ingenious exhaust nut M40x1.5 long 32 mm manifold | Sachs
Ø outside: 45 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Nut type: Union nut · Ø inside: 32.5 mm · Thread type: MF40x1.5 (fine pitch thread) · Height: 22 mm · Nominal diameter (thread): 40 mm
EUR 26.60
BAD ASS cylinder head L Ø 41-43 mm | Sachs 502, 50/2, 50/3, 50/4
Ø outside: 108 mm · Manufacturer: BAD ASS · Material: Aluminum · Ø cylinder: 41 - 43 mm · Ø screw holder: 19.3 mm · Hole pattern [mm]: 37 x 37 · Number of fixing points: 1 pcs · Number of fixing points: 4 pcs · Area of application: Tuning · Decompressor: M10x1.5
EUR 183.70
Hot
Tivedens engine 41 mm cylinder kit S3 | Sachs 50/2 (DE), 50/3, 50/4
Manufacturer: Tivedens Motor AB · Material: Gray cast iron · Surface: varnished · Nominal diameter: 41 mm · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø piston pin (B): 12 mm · Ø cylinder neck: 44 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 29.5 mm · Hole spacing inlet: 31 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Number of fixing points: 4 pcs · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread) · Area of application: Tuning
EUR 355.30
Hot
Tivedens engine 41 mm cylinder kit S4 | Sachs 50/2 (DE), 50/3, 50/4
Manufacturer: Barikite · Manufacturer: Tivedens Motor AB · Material: Gray cast iron · Nominal diameter: 41 mm · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø piston pin (B): 12 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 18 mm · Ø outlet inside: 30 mm · Hole spacing inlet: 31 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Number of fixing points: 4 pcs · Outlet type: Union nut · Thread outlet: MF36x1.5 (fine pitch thread) · Area of application: Tuning
EUR 392.10
Explore categories from Cylinder
Moped fans also bought
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Ø inside: 15 mm · Stock number: E15 · Inner ring width: 8 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CN (standard) · Bearing cage: Brass cage ball-guided · Groove ring: No · Material: Brass · Area of application: Standard · Material: Steel · Bearing type: Shoulder bearing · Width: 8 mm · Ø outside: 35 mm · Pony OEM number: A1149 · Sachs OEM no.: 0232 017 006
EUR 30.50
swiing® revival exhaust nut M40x1.5 for 32 mm pipe, galvanized | Sachs
Ø outside: 46 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Union nut · Ø inside: 33.5 mm · Thread type: MF40x1.5 (fine pitch thread) · Height: 19 mm · Nominal diameter (thread): 40 mm
EUR 17.00
swiing® revival bolt set cylinder head galvanized | Sachs 503 / 50/2 / 50/3 / 50/4
Manufacturer: swiing® revival parts · Number of components: 12 pcs · Material: Steel · Surface: galvanized (blue) · Color: silver · Drive: External hexagon · Total length: 34 mm · Screw head: Hexagon · Thread type: M6x1 (standard thread) · Shank: Yes · Ø shaft: 5.85 mm · Nominal diameter (thread): 6 mm · Thread length: 22 mm · Shank length: 8 mm · Width across flats: 10 mm · Strength class: 10.9 · Area of application: Standard
EUR 6.00
swiing® revival engine seal | Sachs 502, 50/2, 50/3, 50/4 (A1828)
Thickness: 0.4 mm · Width: 170 mm · Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Ø inside: 86 mm · Total length: 250 mm · Number of fixing points: 16 pcs · Pony OEM number: A1828 · Sachs OEM no.: 0250 088 100
EUR 7.25
swiing® revival carburetor 17 mm Bing SSB 1/17/69
Material: Aluminum · Manufacturer: swiing® revival parts · Mounting type: Flange · Component group Carburetor: Carburetor complete · Area of application: Standard · Area of application: Tuning · Nominal diameter: 17 mm · Carburetor type: SSB · Width: 85 mm · Height: 100 mm · Total length: 132 mm · Ø fuel hose connection: 6 mm · Nozzle size: 76 · Hole spacing inlet: 31 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: without choke · Camouflaged: No
EUR 155.50
swiing® ingenious gasket cylinder head 41 mm | Sachs 503, 502, 50/2, 50/3, 50/4
Ø inside: 41.7 mm · Nominal diameter: 41 mm · Thickness: 0.3 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Standard · Ø cylinder: 41 mm · Place of use: Cylinder head · Hole pattern [mm]: 37 x 37
EUR 6.00
swiing® ingenious 41 mm cylinder head tuning | Sachs 50/2, 50/3, 50/4
Ø outside: 98 mm · Width: 95 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Ø cylinder: 41 mm · Total length: 127 mm · Ø screw holder: 19 mm · Height: 50 mm · Hole pattern [mm]: 37 x 37 · Candle thread: long · Number of fixing points: 4 pcs · Area of application: Standard · Decompressor: M10x1.5
EUR 84.00
Working late? Evening hours on Thursday until 20:00
