Complete LELEU brake plate suitable for the front wheel on Puch Maxi S/N, X30 Sport NS, NL & NG and Velux X30 moped / moped with 11 mm wheel axle.
The backing plate is suitable for LELEU cast rims and wire spoke wheels .
The brake anchor plate was reproduced in a small series using the old casting tools and therefore corresponds to the original from times gone by.
The anchor plate was fitted with high-quality NewFren brake pads.
| Manufacturer | LELEU |
| Material | Aluminum |
| Ø axle | 11 mm |
| Ø drum | 80 mm |
| Ø bore | 11.1 mm |
| Puch OEM number | 349.1.40.007.2, 349.1.40.807.9 |
| Puch |
Ratings
Accessories & related products
Front brake anchor plate | Puch Maxi S, N / X30 Sport NS, NL / Velux
Material: Aluminum · Ø outside: 94 mm · Ø axle: 11 mm · Ø bore: 11.3 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 74 mm · Thread size: M6 · Puch OEM number: 349.1.40.007.2 · Puch OEM number: 349.1.40.807.9
EUR 61.10
Not in stock
Brake anchor plate front 12 mm axle (1A quality) | Puch Maxi S, N / X30 Sport NS, NL / Velux
Manufacturer: GPO · Material: Aluminum · Ø outside: 95 mm · Ø External brake pads: 80 mm · Ø axle: 12 mm · Ø bore: 12.1 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 78 mm · Thread size: M6 · Puch OEM number: 349.1.40.007.2 · Puch OEM number: 349.1.40.807.9
EUR 73.30
Not in stock
Hot 
LELEU wheel hub spoke wheel front 36 holes with anchor plate & axle | Puch
Manufacturer: LELEU · Material: Aluminum · Area of application: Original · Ø axle: 11 mm · Axle length: 160 mm · Ø drum: 80 mm · Ø outside: 115 mm · Thread type: MF11x1 (fine pitch thread) · Number of spoke holes: 36 pcs · Ø spoke hole: 3.7 mm
EUR 195.70
Moped fans also bought
swiing® revival start slide Bing SRE
Manufacturer: swiing® revival parts · Material: Steel · Component group Carburetor: Choke control · Surface: galvanized (blue) · Carburetor type: SRE · Total length: 23.5 mm · Width: 16 mm · Height: 12.5 mm · Choke control: Hand choke · Alternative version of the Pony OEM number: A4599 · Alternative version of the Sachs OEM number: 0962 089 000
EUR 5.50
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Thickness: 1.5 mm · Material: Sealing paper · Component group Carburetor: Sealing, revising · Surface: blank · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø outside: 45 mm · Ø inside: 41 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3.45
GPO tail light ULO | Puch Maxi N, S old version
Material: Plastic · Width: 60 mm · Manufacturer: GPO · Bulb holder: BA15s · Tension: 6 V · Color: black · Color: red · Height: 110 mm · Test mark: none · Ø Receptacle: 4 mm · Depth: 80 mm · Mounting type: Nuts & bolts · Brake light: No · Reflectors: Yes · Battery operated: No · Number of fixing points: 2 pcs
EUR 44.70
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing type: Ball ring · Ø inside: 25 mm · Stock number: K042 · Ø outside: 36 mm · Width: 6.8 mm · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Bearing cage: "-" Sheet steel cage ball-guided · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Area of application: Standard
EUR 9.70
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Bearing type: Plain bearing · Manufacturer: swiing® revival parts · Material: Nylon · Surface: blank · Color: black · Ø inside: 16.2 mm · Total length: 19 mm · Ø outside: 20.2 mm · Ø Bundle: 24.1 mm · Puch OEM number: 349.1.42.005.1
EUR 3.05
Collection only possible with online purchase and appointment.
