Hot 
Complete LELEU spoke wheel hub with brake anchor plate and axle for your Puch Maxi S, N and X30 Velux (except Ur-Velux) moped / moped.
The wheel hub is from new production.
The brake anchor plate was produced again in a small series using the old casting tools and therefore corresponds to the original from times gone by.
The wheel hub comes from new production, is precisely manufactured and impresses with its high-quality workmanship. The hub is equipped with deep groove ball bearings and an M11 axle.
The 36 spoke holes with a diameter of 3.7 mm are also suitable for 2.9 mm stainless steel spokes.
Note: Unfortunately, the brake pads are something that didn't convince us. We recommend replacing them with a high-quality alternative from the accessories range.
| Manufacturer | LELEU |
| Material | Aluminum |
| Ø drum | 80 mm |
| Ø outside | 115 mm |
| Ø axle | 11 mm |
| Axle length | 160 mm |
| Thread type | MF11x1 (fine pitch thread) |
| Number of spoke holes | 36 pcs |
| Ø spoke hole | 3.7 mm |
| Area of application | Original |
| Puch |
Ratings
Accessories & related products
LELEU wheel hub spoke wheel front 28 holes with anchor plate & axle | Puch Maxi N, X30 Chopper
Ø inside: 80 mm · Manufacturer: LELEU · Area of application: Original · Material: Aluminum · Ø axle: 11 mm · Ø outside: 115 mm · Axle length: 160 mm · Ø drum: 80 mm · Thread type: MF10x1 (fine pitch thread) · Number of spoke holes: 28 pcs · Ø spoke hole: 3.7 mm · Ø bolt circle: 105 mm
EUR 195.70
Rear wheel hub spoke 36 holes with axle (1A quality) | Puch Maxi, X30 NG-2AH
Width: 105 mm · Total length: 185 mm · Area of application: Standard · Material: Aluminum · Color: silver · Ø axle: 12 mm · Ø outside: 115 mm · Number of fixing points: 6 pcs · Thread length: 12 mm · Thread length: 17 mm · Thread length: 43 mm · Ø drum: 80 mm · Thread type: FG34.8 (1.37" 24G) · Thread type: M5x0.8 (standard thread) · Thread type: MF12x1 (fine pitch thread) · Number of spoke holes: 36 pcs · Ø spoke hole: 3.7 mm · Ø bolt circle: 105.5 mm · Puch OEM number: 349.5.41.803.1
EUR 116.20
Moped fans also bought
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch · Temperature resistance (min.): -30 - 220 °C
EUR 12.10
EUR 26.89/l
GPO 17" spoke set incl. nipple (2.9 x 188 mm) Inox
Nipple length: 14 mm · Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Surface: raw · Quantity: 36 pcs · Nominal diameter (thread): 3.15 mm · Length from hook: 188 mm · Ø spoke: 2.9 mm · Ø spoke head: 5.35 mm · Thread length: 11 mm · Color: silver · Ø nipple head: 7.9 mm · Ø Nipple neck: 5 mm · Hook length: 9 mm · Hook angle: 95 °
EUR 67.20
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Nominal diameter: 15 mm · Width: 50 mm · Choke control: Hand choke · Carburetor type: SRE · Height: 95 mm · Total length: 66 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Area of application: Tuning · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.17 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 97.80
Collection only possible with online purchase and appointment.
