Base plate suitable for the three-jaw centrifugal clutch of Puch mopeds / mopeds with E50 engines.
The clutch carrier is made of steel and is extended. The mounting pins can be secured with circlips. In addition, M4 threads are cut into the pins so that a reinforcement plate can be fitted.
The aforementioned plate, clutch linings, complete clutches and the clutch hub without threaded holes can be found in the accessories section.
Original Puch spare part number: 349.1.12.504.2
| Thickness | 19.1 mm |
| Material | Steel |
| Ø inside | 11.85 mm |
| Ø outside | 92.6 mm |
| Recording type | Cone mounting |
| Number of jaws | 3 pcs |
| Area of application | Standard |
| Puch | E50 |
Accessories & related products
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Surface: coated · Total length: 28 mm · Color: blue · Number of components: 3 pcs
EUR 21.90
Hot 
Jammer racing clutch special 65 ccm and more | Puch E50
Manufacturer: Jammer · Material addition: Steel · Material: Steel · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 19 mm · Ø outside: 92.5 mm · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
EUR 231.80
Not in stock
HK clutch "Racing" (with additional weight) Aramid | Puch E50
Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Thickness: 21.2 mm · Manufacturer: HK Clutches · Material: Aluminum · Material: Chrome steel (known as Nirosta®) · Material: Steel · Material addition: Composite materials · Number of springs: 3 pcs · Number of jaws: 3 pcs · Recording type: Cone mounting · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 512.60
DMP clutch "Racing" aluminum reinforced | Puch E50
Thickness: 22 mm · Manufacturer: DMP · Material: Steel · Material addition: Chrome steel (known as Nirosta®) · Ø outside: 94 mm · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 146.40
Moped fans also bought
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Hole spacing inlet: 32 - 38 mm · Ø outlet inside: 19.9 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Area of application: Standard · Decompressor: Yes
EUR 12.10
swiing® ingenious needle roller bearing 12/15/16.2 "Racing" silver cage
Manufacturer: swiing® ingenious parts · Bearing type: Needle roller and cage assembly · Bearing cage: Silver cage · Ø inside: 12 mm · Width: 16.2 mm · Ø outside: 15 mm · Dimension needle bearing: 12/15 x 16.2 · Tomos OEM number: 035548
EUR 17.00
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Thickness: 0.5 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Ø inside: 106 mm · Number of fixing points: 4 pcs · Number of components: 1 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 3.55
Collection only possible with online purchase and appointment.
