Socket axle M11x180 made of heavy-duty, galvanized special steel with cones and nuts for various rear wheels with cast spokes on your Puch moped / moped.
The complete threaded shaft set is also equipped with the following parts:
- 3 pieces of M11 x 1 nuts (SW19 / 10 mm)
- 4 pieces of washers (11.2/20/2 mm)
- 2 pieces of swiing bearing cone M11 (D18 x H14.15 mm / SW15)
- 2 pieces of M11 x 1 nuts (SW17 / 4 mm)
- 1 piece of spacer (12.3/19x6 mm)
&p;reworked version of the previously offered wheel axle. Both the axle and the cones are made of high-quality material that can withstand high loads.
The ends of the wheel axle are chamfered and the thread is perfectly cut. This makes it easy to fit the cones and wheel nuts.
Other axle parts can be found in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Thread type | MF11x1 (fine pitch thread) |
| Ø shaft | 10.95 mm |
| Total length | 180 mm |
| Shank length | 30 mm |
| Thread length | 75 mm |
| Width across flats SW | 19 mm |
Suitable for the following models
| Puch |
Accessories & related products
swiing® revival wheel axle set M11x180 mm spoke rear wheel | Puch Maxi, X30
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 180 mm · Thread length: 75 mm · Shank length: 30 mm · Width across flats SW: 15 mm · Width across flats SW: 17 mm · Width across flats SW: 19 mm · Ball bearing closed: No
EUR 48.80
CIF wheel axle set M11x1 x 200 mm galvanized
Manufacturer: CIF · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Ø shaft: 10.3 mm · Total length: 200 mm · Thread length: 92 mm · Shank length: 14.5 mm · Height: 2 mm · Height: 4 mm · Height: 10 mm · Width across flats SW: 15 mm · Width across flats SW: 17 mm · Ball bearing closed: No · Ø ball [inch] / [mm]: 1/4" (6.35 mm)
EUR 18.20
Bearing cone M11x1 mm
Material: Steel · Surface: gas nitrided · Height: 12 mm · Thread type: MF11x1 (fine pitch thread) · Width across flats SW: 15 mm · Ø outside: 19 mm · Color: graphite colors · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Ø ball [inch] / [mm]: 3/16" (4.78 mm) · Ø ball [inch] / [mm]: 7/32" (5.56 mm)
EUR 9.65
66HEROES cap nut M11x1 stainless steel polished
Material: Chrome steel (known as Nirosta®) · Surface: polished · Height: 26.2 mm · Manufacturer: 66HEROES · Nut type: Cap nut · Drive: External hexagon · Thread type: MF11x1 (fine pitch thread) · Width across flats SW: 17 mm · Thread depth: 23.4 mm
EUR 14.60
swiing® revival wheel bearing set M11x1
Manufacturer: swiing® revival parts · Material: Steel · Surface: gas nitrided · Diameter: 17.95 mm · Ø inside: 25.85 mm · Ø outside: 29 mm · Height: 10.6 mm · Height: 14.15 mm · Thread type: MF11x1 (fine pitch thread) · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Width across flats SW: 15 mm
EUR 53.70
Not in stock
Moped fans like you also bought:
NTN wheel bearing 12/28/8 rear cast hub Leleu | Puch Maxi
Bearing type: Deep groove ball bearing · Stock number: 6001 · Ø inside: 12 mm · Ø outside: 28 mm · Width: 8 mm · Inner ring width: 12 mm · Manufacturer: NTN · Ball bearing closed: Yes · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CM (special/noise-reduced) · Bearing cage: "-" Sheet steel cage ball-guided · Groove ring: No · Material: Plastic · Material: Steel · Surface: blank · Area of application: Standard
EUR 7.20
swiing® revival wheel axle set M11x1 x 180 cast rear wheel (version 2.0) | Puch Maxi, X30
Ball bearing closed: No · Manufacturer: swiing® revival parts · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Total length: 180 mm · Shank length: 30 mm · Thread type: MF11x1 (fine pitch thread) · Thread length: 75 mm · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Width across flats SW: 15 mm · Width across flats SW: 17 mm · Width across flats SW: 19 mm
EUR 61.00
Not in stock
Collection only possible with online purchase and appointment.
