M11x180 thru-axle with cones and nuts for various rear wheels with wire-spoke hubs on your Puch moped.
The cone and lock nut on the side of the brake anchor plate are already pre-assembled. This ensures the necessary spacing is provided, eliminating the need for time-consuming spacing adjustments
The colored markings show you where each part goes:
- red mark: wheel hub
- green mark: brake anchor plate
- blue mark: swingarm
All components are made from high-quality materials. The wheel axle is made of reinforced special steel, and the cones are additionally hardened.
You can find additional axle parts in the accessories section.
A nostalgic product from the swiing® quality brand that meets the highest standards.
| Ball bearing closed | No |
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Shank length | 30 mm |
| Thread type | MF11x1 (fine pitch thread) |
| Width across flats | 19 mm, 15 mm, 17 mm |
| Total length | 180 mm |
| Thread length | 75 mm |
| Puch |
Accessories & related products
GPO cap nut M11x1 SW17 wheel nut chrome
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Nut type: Cap nut · Nominal diameter (thread): 11 mm · Drive: External hexagon · Height: 21.5 mm · Width across flats: 17 mm · Thread depth: 14 mm · Thread type: MF11x1 (fine pitch thread)
EUR 10.90
CIF wheel axle set M11x1 x 200 galvanized
Manufacturer: CIF · Ball bearing closed: No · Material: Steel · Surface: galvanized (blue) · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Height: 2 mm · Height: 4 mm · Height: 10 mm · Width across flats: 15 mm · Width across flats: 17 mm · Ø shaft: 10.3 mm · Shank length: 14.5 mm · Thread type: MF11x1 (fine pitch thread) · Total length: 200 mm · Thread length: 92 mm
EUR 18.30
swiing® revival wheel nut M11x1 x 4 SW17 Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Nut type: Hexagon flat nut · Nominal diameter (thread): 11 mm · Drive: External hexagon · Height: 4 mm · Width across flats: 17 mm · Thread type: MF11x1 (fine pitch thread)
EUR 7.25
Bearing cone M11x1 mm
Material: Steel · Surface: gas nitrided · Color: graphite colors · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Ø ball [inch] / [mm]: 3/16" (4.78 mm) · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Height: 12 mm · Width across flats: 15 mm · Ø outside: 19 mm · Thread type: MF11x1 (fine pitch thread)
EUR 9.70
66HEROES cap nut M11x1 stainless steel polished
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Nut type: Cap nut · Nominal diameter (thread): 11 mm · Drive: External hexagon · Height: 26.2 mm · Width across flats: 17 mm · Thread depth: 23.4 mm · Thread type: MF11x1 (fine pitch thread)
EUR 14.60
swiing® revival wheel bearing set M11x1
Manufacturer: swiing® revival parts · Diameter: 17.95 mm · Material: Steel · Surface: gas nitrided · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Height: 10.6 mm · Height: 14.15 mm · Width across flats: 15 mm · Ø inside: 25.85 mm · Ø outside: 29 mm · Thread type: MF11x1 (fine pitch thread)
EUR 53.80
Explore categories from Hub & axle
Moped fans also bought
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Thread length: 4 mm · Number of components: 2 pcs
EUR 2.45
Fortune / Merrick 2.00-2.25 x 16" / 17" inner tube
Manufacturer: Fortune · Tire width: 2 - 2.5 " · Tire width: 2.25 - 2.5 " · Tire width: 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width: 2 " · Width: 2 1/4 " · Width: 2 1/2 " · Tire height [%]: 100 · Old designation: 20 x 2 " · Old designation: 20 x 2.25 " · Old designation: 20 x 2.5 " · Old designation: 21 x 2 " · Old designation: 21 x 2.25 " · Old designation: 21 x 2.5 " · Valve type: TR4 Auto valve · Wheel size: 16 - 17 " · Wheel size: 17 " · Alternative version of the Puch OEM number: 567.060700 · Alternative version of the Puch OEM number: 901.0863 · Alternative version of the Puch OEM number: 902.0853
EUR 12.90
Hot 
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 1600 mm · Total length: 2200 mm
EUR 12.10
swiing® revival wheel axle set M11x1 x 154 front wheel spokes | Puch Maxi, X30 Sport, Velux
Ball bearing closed: No · Manufacturer: swiing® revival parts · Diameter: 11 mm · Material: Steel · Surface: galvanized (blue) · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Thread type: MF11x1 (fine pitch thread) · Total length: 154 mm
EUR 58.70
Not in stock
Working late? Evening hours on Thursday until 20:00
