Aluminum stroke plate for your Zündapp Belmondo, Bergsteiger moped / moped with type 247 engine.
The spacer is mounted under the cylinder base. The "lifting" of the cylinder increases the intake and exhaust timing. Accordingly, the same distance of the spacer should be turned down at the top of the cylinder
so that the original squish edge dimension and compression ratio are maintained.
Material thickness (selection): 0.5 / 1.0 / 1.5 / 2.0 mm
Material: aluminum
Ø cylinder neck: 50 mm
Number of attachment points: 4 pieces
Matching cylinders, sealant and alternative stroke plates in various thicknesses can be found in the accessories section.
Exclusive product for the highest demands from the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Surface | raw |
| Place of use | Cylinder base |
| Ø cylinder | 50 mm |
| Thickness | 0.5 mm, 1 mm, 1.5 mm, 2 mm |
| Area of application | Tuning |
| Zündapp | Belmondo (Type 247-71) Moped 25 (M 25) / Moped M 50 Bergsteiger (Type 247-434) |
Ratings
Accessories & related products
swiing® ingenious 39 mm cylinder kit tuning with head | Zündapp Bergsteiger
Manufacturer: Vertex · Manufacturer: swiing® ingenious parts · Camouflaged: No · Area of application: Tuning · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Ø piston pin (B): 12 mm · Nominal diameter: 39 mm · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Decompressor: No
EUR 277.60
swiing® ingenious 44 mm cylinder kit tuning with head | Zündapp Bergsteiger
Manufacturer: Vertex · Manufacturer: swiing® ingenious parts · Camouflaged: No · Area of application: Tuning · Material: Aluminum · Surface: sandblasted · Displacement: 65 ccm · Crankshaft stroke: 42 mm · Nominal diameter: 44 mm · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Decompressor: No
EUR 296.10
Elring Dirko HT sealing compound red (silicone) high temp. 70 ml elastic up to 315°C
Temperature resistance (min.): -60 - 300 °C · Manufacturer: Elring · Area of application: Chemistry · Contents: 70 ml · Hazard warning: Causes serious eye irritation · Color: red · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Gap dimension (max.): 2 mm
EUR 28.30
EUR 404.29/l
swiing® ingenious lifting plate 2 mm aluminum | Zündapp Type 247
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Surface: raw · Ø cylinder: 50 mm · Place of use: Cylinder base · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm
EUR 24.60
swiing® ingenious lifting plate 1.5 mm aluminum | Zündapp Type 247
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Surface: raw · Ø cylinder: 50 mm · Place of use: Cylinder base · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm
EUR 24.60
swiing® ingenious lifting plate 1 mm aluminum | Zündapp Type 247
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Surface: raw · Ø cylinder: 50 mm · Place of use: Cylinder base · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm
EUR 24.60
swiing® ingenious lifting plate 0.5 mm aluminum | Zündapp Type 247
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Surface: raw · Ø cylinder: 50 mm · Place of use: Cylinder base · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm
EUR 24.60
Moped fans also bought
GPO gasket set | Puch E50
Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Manufacturer: GPO · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Area of application: Standard · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 12.20
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
EUR 12.20
EUR 27.11/l
swiing® ingenious 16 mm intake manifold Bing SRF | Zündapp Belmondo (Type 247)
Material: Aluminum · Number of fixing points: 2 pcs · Ø inside: 16 mm · Manufacturer: swiing® ingenious parts · Mounting type: Screws · Ø External connection: 23 mm · Total length: 35 mm · Hole spacing inlet: 40 mm · Area of application: Tuning · Height flange center hole: 35 mm · Total height: 42 mm · Camouflaged: No
EUR 49.20
Collection only possible with online purchase and appointment.
