70 cc tuned cylinder for Kreidler Florett RS, RMC, RM, LF, and RM mopeds / small motorcycles.
This high-performance aluminum racing cylinder with a nickel-silicon carbide coating (commonly known as Nikasil) delivers a whopping 8 PS.
Exhaust port diameter: 32 mm
; Intake port dimensions: 28 x 16 mm
; Intake stud spacing: 47 mm
; Bore: 44.0 mm
Includes piston and gasket set.
Note: Please observe the installation direction during assembly. The piston is installed with the arrow pointing toward the exhaust on the exhaust side.
You can find the matching cylinder head for the racing kit as well as other components in the accessories section.
Product from the Italian manufacturer Parmakit.
| Manufacturer | Parmakit |
| Material | Aluminum |
| Surface | sandblasted |
| Area of application | Tuning |
| Hole spacing inlet | 47 mm |
| Nominal diameter | 44 mm |
| Ø Outlet outside | 32 mm |
| Thread inlet | M6x1 (standard thread) |
| Ø piston pin (B) | 14 mm |
| Outlet type | clamped |
| Number of fixing points | 4 pcs |
| Camouflaged | No |
| Kreidler |
Accessories & related products
Rito crankshaft Kreidler Florett K3 42 mm stroke
Manufacturer: Rito · Cheek type: standard · Crankshaft stroke: 42 mm · Connecting rod length center-center: 85 mm · Total length of crankpin on clutch side: 64.2 mm · Total length crankpin ignition side: 63.8 mm · Ø piston pin (B): 14 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Wide crank webs: 39.9 mm · Area of application: Standard · Number of gears: 3 pcs · Number of gears: 4 pcs · Number of gears: 5 pcs
EUR 318.60
40 mm tuning cylinder | Kreidler Florett RS, RMC
Material: Aluminum · Camouflaged: No · Surface: sandblasted · Nominal diameter: 40 mm · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 50 mm · Ø piston pin (B): 14 mm · Number of fixing points: 4 pcs · Outlet type: slanted · Hole spacing inlet: 47 mm · Area of application: Tuning
EUR 337.00
Explore categories from Cylinder
Moped fans also bought
Hot 
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Nominal diameter (thread): 6 mm · Total length: 30 mm · Thread type: M6x1 (standard thread) · Strength class: 10.9 · Thread length: 12 mm
EUR 2.20
AKOA 21 mm intake manifold Dell'Orto PHBG plastic | Puch E50 / Z50 / ZA50 (wind cooled)
Color: black-matt · Manufacturer: AKOA · Ø inside: 20.7 mm · Material: Plastic · Ø External connection: 26 mm · Number of fixing points: 2 pcs · Mounting type: Screws · Hole spacing inlet: 38 mm · Area of application: Tuning
EUR 36.70
Not in stock
swiing® revival Screw Set, Engine, Stainless Steel, Small | Puch E50
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Area of application: Standard · Drive: Hexagon socket · Drive: Slot · Screw head: Countersunk head · Screw head: Cylinder head · Puch OEM number: 900.1216 · Puch OEM number: 900.1308
EUR 24.40
swiing® ingenious pull starter EVO & HPI ignition (210) | Puch E50
Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Manufacturer: swiing® ingenious parts · Color: Chrome · Color: black · Ignition system: HPI · Number of fixing points: 2 pcs · Ø outside: 130 mm · Width: 135 mm · Total length: 160 mm · Height: 93 mm · Hole spacing: 137.5 mm
EUR 183.70
DMP crankshaft full cheeks with mounted bearings | Puch E50
Manufacturer: DMP · Material: Steel · Cheek type: Full cheeks · Crankshaft stroke: 43 mm · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø piston pin (B): 12 mm · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread type: MF10x1 (fine pitch thread) · Thread length: 10 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.6 mm · Number of gears: 1 pcs · Area of application: Racing
EUR 202.10
Hot
swiing® ingenious EVO ignition | Puch E50, Z50
Manufacturer: swiing® ingenious parts · Tension: 12 V · Area of application: High End · Area of application: Racing · Area of application: Tuning · Light coil voltage: 12 V · Direction of rotation: any · Ø mounting plate: 90 mm · Mounting type: Screws · Performance: 60 W · Ø Internal flywheel: 63.5 mm · Ø Flywheel outside: 75 mm · Number of fixing points: 3 pcs
EUR 330.80
GPO 45 mm piston (Metrakit replica) | Puch
Nominal diameter: 45 mm · Manufacturer: GPO · Material: Aluminum · Thick piston ring: 1.8 mm · Thick piston ring: 1.9 mm · Ø outside piston (A): 44.93 mm · Compression height (C): 23.25 mm · Curvature (D): 2.85 mm · Total piston height (E): 49.6 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.55 mm · Piston ring height: 2 mm · Ø piston pin (B): 12 mm · Weight piston kit: 98 g
EUR 61.20
Working late? Evening hours on Thursday until 20:00
