45 mm piston with a 2 mm L-piston ring with internal circlip (IS) and a 1.5 mm rectangular piston ring with flank circlip (FS) for the «GPO Metrakit» cylinder kit on your Puch Maxi S, N, X30 Sport NS, NL and Supermaxi LG1 and LG2 moped / moped.
The detailed dimensioning of the piston according to the technical drawing can be found in the details. You can also find out about the relevant piston rings, their stems and locking types on the legend in the pictures.
| Manufacturer | GPO |
| Material | Aluminum |
| Ø outside piston (A) | 44.93 mm |
| Ø piston pin (B) | 12 mm |
| Compression height (C) | 23.25 mm |
| Curvature (D) | 2.85 mm |
| Total piston height (E) | 49.6 mm |
| Number of piston rings (F) | 2 pcs |
| Nominal diameter | 45 mm |
| Piston ring mold | Rectangular ring, L-ring |
| Piston ring impact | Internal fuse (IS) |
| Piston ring height | 1.55 mm, 2 mm |
| Thick piston ring | 1.8 mm, 1.9 mm |
| Weight piston kit | 98 g |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
GPO gasket set 43.5 & 45 mm (Metrakit replica) | Puch
Manufacturer: GPO · Material: Aluminum · Material: Graphite / Graphite · Material: Sealing carton · Thickness: 0.4 mm · Thickness: 0.5 mm · Thickness: 2.6 mm · Ø cylinder: 43.5 mm · Ø cylinder: 45 mm · Ø outlet inside: 26.5 mm · Hole spacing outlet: 42 mm · Hole spacing inlet: 38 mm · Number of components: 4 pcs · Hole pattern [mm]: 44 X 44
EUR 18.30
GPO piston rings 43.5 mm (Metrakit replica) | Puch
Manufacturer: GPO · Thick piston ring: 1.7 mm · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Height: 1.5 mm · Piston ring impact: Flank safety device (FS) · Piston ring impact: Internal fuse (IS) · Nominal diameter: 43.5 mm
EUR 15.80
GPO 45 mm cylinder kit (Metrakit replica) | Puch
Manufacturer: GPO · Material: Aluminum · Material: Gray cast iron · Camouflaged: No · Surface: varnished · Crankshaft stroke: 43 mm · Displacement: 70 ccm · Ø piston pin (B): 12 mm · Nominal diameter: 45 mm · Ø cylinder neck: 47.8 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 26 mm · Area of application: Racing · Area of application: Tuning · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 38 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44
EUR 196.00
Explore categories from Piston
Moped fans also bought
Hot 
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.95 mm · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Total length: 30 mm · Thread length: 12 mm · Strength class: 10.9
EUR 2.20
GPO 45 mm cylinder head tuning black | Puch Maxi S, N, X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Surface: varnished · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Ø cylinder: 45 mm · Number of fixing points: 4 pcs · Decompressor: No
EUR 52.60
Hot
swiing® ingenious 17 mm SRF carburetor camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Nominal diameter: 17 mm · Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Nozzle size: 74 · Ø Inside entrance: 17 mm · Width: 47 mm · Ø Output inside: 17.1 mm · Height: 89 mm · Height: 109 mm · Ø Air filter connection: 27.5 mm · Ø Internal connection: 23 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 5 mm · Total length: 65 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Area of application: Tuning · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 147.00
Hot
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Material: Aluminum · Ø External connection: 23 mm · Total height: 53.5 mm · Total length: 38 mm · Ø inside: 17 mm · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Height flange center hole: 42 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Hole spacing inlet: 38 mm
EUR 55.00
Hot
GPO 45 mm Cylinder (Metrakit Replica) | Puch
Manufacturer: GPO · Material: Aluminum · Material: Gray cast iron · Camouflaged: No · Surface: varnished · Crankshaft stroke: 43 mm · Displacement: 70 ccm · Nominal diameter: 45 mm · Ø cylinder neck: 47.8 mm · Hole spacing for cylinder mounting: 44 mm · Area of application: Racing · Area of application: Tuning · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 38 mm · Cooling type: Airstream cooling
EUR 134.70
GPO gasket set 43.5 & 45 mm (Metrakit replica) | Puch
Manufacturer: GPO · Material: Aluminum · Material: Graphite / Graphite · Material: Sealing carton · Thickness: 0.4 mm · Thickness: 0.5 mm · Thickness: 2.6 mm · Ø cylinder: 43.5 mm · Ø cylinder: 45 mm · Ø outlet inside: 26.5 mm · Hole spacing outlet: 42 mm · Hole spacing inlet: 38 mm · Number of components: 4 pcs · Hole pattern [mm]: 44 X 44
EUR 18.30
GPO 45 mm cylinder kit (Metrakit replica) | Puch
Manufacturer: GPO · Material: Aluminum · Material: Gray cast iron · Camouflaged: No · Surface: varnished · Crankshaft stroke: 43 mm · Displacement: 70 ccm · Ø piston pin (B): 12 mm · Nominal diameter: 45 mm · Ø cylinder neck: 47.8 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 26 mm · Area of application: Racing · Area of application: Tuning · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 38 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44
EUR 196.00
AKOA 45 mm Cylinder Head, Black | Puch E50 / Z50 / ZA50 (Air-Cooled) / ZA50 (Cat.)
Manufacturer: AKOA · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Surface: varnished · Width: 123.2 mm · Height: 54.5 mm · Total length: 132.2 mm · Ø cylinder: 45 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 55.00
Working late? Evening hours on Thursday until 20:00
