Three clutch springs suitable for the Jammer racing clutch of your Puch Maxi S and N moped / moped with E50 engine.
These medium-strength springs for the centrifugal clutch change the clutch engagement behavior so that a higher speed is required until the clutch engages.
Note: We recommend stretching the springs once (pulling them into length) before installation so that the color loosens and the spring can function properly.
Other clutch spring sets and complete racing clutches can be found in the accessories section.
Quality product from the American manufacturer Jammer Clutches.
| Spring design | Tension spring |
| Length spring hook | 10.8 mm |
| Leg length | 13.5 mm, 9.6 mm |
| Ø wire | 1.6 mm |
| Ø inside | 7.4 mm |
| Manufacturer | Jammer |
| Ø outside | 11 mm |
| Total length | 37 mm |
| Material | Spring steel |
| Area of application | Tuning |
| Surface | varnished |
| Color | green |
| Puch | E50 |
Accessories & related products
Jammer clutch 1st gear (aluminum carrier) | Tomos A35, A55
Manufacturer: Jammer · Material: Steel · Material addition: Aluminum · Recording type: Interlocking · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Tomos OEM number: 227849
EUR 220.50
Malossi replacement clutch springs Jammer clutch | Puch, Tomos
Spring design: Tension spring · Ø wire: 2.2 mm · Ø wire: 2.3 mm · Ø wire: 2.4 mm · Manufacturer: Malossi · Material: Spring steel · Surface: varnished · Color: red · Color: white · Color: yellow · Total length: 32.6 mm · Area of application: Tuning
EUR 36.70
GPO clutch spring set Jammer clutch "Stage 1" pink
Spring design: Tension spring · Length spring hook: 8 mm · Length spring hook: 14 mm · Ø wire: 1.1 mm · Manufacturer: GPO · Material: Spring steel · Surface: varnished · Color: pink · Total length: 34 mm · Ø inside: 7.7 mm · Ø outside: 9.9 mm · Area of application: Tuning
EUR 14.60
Explore categories from Clutch
Moped fans also bought
Not so nice 
15 mm intake manifold | Puch E50
Material: Aluminum · Ø inside: 14.5 mm · Ø External connection: 20 mm · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Total height: 54 mm · Height flange center hole: 43 mm · Mounting type: Screws · Total length: 47 mm · Camouflaged: Yes · Area of application: Tuning
EUR 14.60
Hot 
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Width across flats Screw: 19 mm · Area of application: (Dis)assembly tool · Material: Steel · Number of components: 1 pcs · Total length: 55 mm · Total length: 75 mm · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Strength class: 8.8
EUR 12.10
Handlebar fork plate 35 cm curved with chrome strut
Manufacturer: Made in Germany · Material: Steel · Color: Chrome · Ø outside: 22 mm · Width: 720 mm · Height: 350 mm · Fork plate holder length: 90 mm · Surface: chrome-plated · Length handlebar ends: 150 mm · Mounting type: Fork plate · Clamping diameter: 22 mm · Crossbar: Yes · Ø Strut: 14 mm · Strut length: 260 mm
EUR 41.10
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Ø outside: 116 mm · Thickness: 1 mm · Ø inside: 106 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.80
GPO clutch spring set Jammer clutch "Stage 2" blue
Spring design: Tension spring · Length spring hook: 8 mm · Length spring hook: 14 mm · Ø wire: 1.3 mm · Manufacturer: GPO · Material: Spring steel · Surface: varnished · Color: blue · Total length: 34 mm · Ø inside: 7.3 mm · Ø outside: 9.9 mm
EUR 14.60
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
