38 mm gray cast iron tuning cylinder with diaphragm control, suitable for your small motorcycle with a fan-cooled Sachs 50/2 (DE), 50/3 (DE), or 50/4 (DE) engine.
This diaphragm cylinder is suitable for Sachs 2-, 3-, and 4-speed fan-cooled engines, which were installed in models such as the Hercules 50/ALS, 50/2 S, 50/KS, 50/2 DK, 50/3 LS, 50/4 LKS, Gritzner, and other small motorcycles.
The cylinder is made of gray cast iron and has a sandblasted surface. The diaphragm control system, in combination with the appropriate mounting parts, ensures a clean fuel-air mixture flow and makes the cylinder an exciting tuning option for fan-cooled Sachs engines.
Exhaust thread: M35x2 mm
Stud spacing: 51x40 mm
Note: The cylinder is shipped loose and without a piston, gasket set, studs, diaphragm gaskets, or other mounting parts.
You can find the matching cylinder head, piston, gasket set, diaphragm insert, and other components in the accessories section.
A good, affordable standard replacement part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Material | Gray cast iron |
| Surface | sandblasted |
| Displacement | 50 ccm |
| Crankshaft stroke | 42 mm |
| Nominal diameter | 38 mm |
| Hole spacing inlet | 67 mm |
| Camouflaged | No |
| Number of fixing points | 4 pcs |
| Outlet type | Union nut |
| Area of application | Tuning, Racing |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) |
Accessories & related products
swiing® revival Stud Bolt M5x23 Inlet (Diaphragm) 10.9 | Sachs 50/2 (A3700)
Thread type: M5x0.8 (standard thread) · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 5 mm · Diameter: 4.9 mm · Total length: 23 mm · Thread length: 6 mm · Thread length: 12 mm · Area of application: Standard · Pony OEM number: A3700 · Sachs OEM no.: 0640 016 101 · Sachs OEM no.: 0640 016 102
EUR 2.20
GPO piston 38 mm | Sachs 50/2, 50/3, 50/4 fan-cooled
Manufacturer: GPO · Nominal diameter: 38 mm · Thick piston ring: 2 mm · Ø outside piston (A): 37.94 mm · Compression height (C): 27.5 mm · Curvature (D): 3.5 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 1.7 mm · Ø piston pin (B): 12 mm · Weight piston kit: 78 g · Alternative version of the Sachs OEM number: 0290 058 025
EUR 41.60
Hot 
swiing® ingenious intermediate flange 17 mm diaphragm | Sachs 502, 50/2, 50/3, 50/4
Thread type: M5x0.8 (standard thread) · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Number of flaps: 2 pcs · Mounting type: Screws · Number of fixing points: 4 pcs · Thickness: 6.9 mm · Ø inside: 17 mm · Total length: 29 mm · Hole spacing: 31 mm · Hole spacing: 67 mm · Width: 80 mm · Area of application: Tuning
EUR 61.20
swiing® ingenious intermediate flange 12 mm diaphragm | Sachs 502, 50/2, 50/3, 50/4
Thread type: M5x0.8 (standard thread) · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Number of flaps: 2 pcs · Mounting type: Screws · Number of fixing points: 4 pcs · Ø inside: 12 mm · Hole spacing: 31 mm · Hole spacing: 67 mm · Area of application: Standard
EUR 67.30
EUR 59.90
swiing® ingenious intermediate flange 13 mm diaphragm | Sachs 502, 50/2, 50/3, 50/4
Thread type: M5x0.8 (standard thread) · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Number of flaps: 2 pcs · Mounting type: Screws · Number of fixing points: 4 pcs · Ø inside: 13 mm · Hole spacing: 31 mm · Hole spacing: 67 mm · Area of application: Standard · Area of application: Tuning
EUR 73.40
Explore categories from Cylinder
Moped fans also bought
Nos
Hot
BERU Spark Plug Connector, 1 kΩ, Noise-Suppressed, NOS
Manufacturer: BERU · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Material: Sheet metal (steel) · Color: silver · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 12.10
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Number of chain links: 114 pcs · Color: gray · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø bore: 4.05 mm · Ø Pin: 4 mm
EUR 23.20
swiing® revival Stud Bolt M5x23 Inlet (Diaphragm) 10.9 | Sachs 50/2 (A3700)
Thread type: M5x0.8 (standard thread) · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 5 mm · Diameter: 4.9 mm · Total length: 23 mm · Thread length: 6 mm · Thread length: 12 mm · Area of application: Standard · Pony OEM number: A3700 · Sachs OEM no.: 0640 016 101 · Sachs OEM no.: 0640 016 102
EUR 2.20
GPO piston 38 mm | Sachs 50/2, 50/3, 50/4 fan-cooled
Manufacturer: GPO · Nominal diameter: 38 mm · Thick piston ring: 2 mm · Ø outside piston (A): 37.94 mm · Compression height (C): 27.5 mm · Curvature (D): 3.5 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 1.7 mm · Ø piston pin (B): 12 mm · Weight piston kit: 78 g · Alternative version of the Sachs OEM number: 0290 058 025
EUR 41.60
Hot
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing type: Deep groove ball bearing · Stock number: E15 · Thread type: MF20.8x1 LH (fine/left-hand thread) · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Material: Steel · Ø outside: 35 mm · Ø inside: 15 mm · Width: 8 mm · Area of application: High End · Area of application: Standard · Pony OEM number: A2531 · Sachs OEM no.: 0286 079 105
EUR 61.20
GPO 38 mm cylinder kit diaphragm | Sachs 50/2, 50/3, 50/4 fan-cooled (DE)
Nominal diameter: 38 mm · Manufacturer: GPO · Material: Gray cast iron · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 67 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 51 x 40 / 37 x 37 · Camouflaged: No · Area of application: Tuning
EUR 175.20
Working late? Evening hours on Thursday until 20:00
