Disc brake system suitable for the rear 5-star cast rim of your Puch moped / moped.
The brake disk mount is compatible with both original Grimeca rims and their replicas. For installation, the rear wheel rim is placed between the adapter piece for the brake disk and the wheel hub and clamped using the enclosed screws in a sandwich principle.
The disc brake system is supplied ready for installation with the following components:
| Ø Handlebars | 22 mm |
| Ø outside | 185 mm |
| Cable length | 1750 mm |
| Puch |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.10
EUR 2’610.00/l
Explore categories from Disc brake
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø Cable bushing: 2.3 mm · Total length: 15 mm · Screw head: Hexagon · Drive: External hexagon · Drive: Slot · Ø Bundle: 6 mm · Ø outside: 8 mm · Thread length: 7 mm · Width across flats: 7 mm
EUR 3.00
EUR 2.65
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Color: blue · Surface: coated · Number of components: 3 pcs · Total length: 28 mm · Ø inside: 4.8 mm · Ø outside: 8.3 mm
EUR 21.30
swiing® revival oil filler plug with sealing ring | Puch E50
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M10x1.5 (standard thread) · Number of components: 2 pcs · Total length: 14.6 mm · Screw head: Lens head · Drive: Slot · Ø External head: 14 mm · Thread length: 6 mm · Puch OEM number: 364.1.10.660.1
EUR 4.20
GPO sprocket 35 - 57 teeth black | Puch Maxi S, N / X30 NG-2AH
Manufacturer: GPO · Material: Steel · Surface: varnished · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Number of teeth: 35 pcs · Number of teeth: 36 pcs · Number of teeth: 37 pcs · Number of teeth: 38 pcs · Number of teeth: 39 pcs · Number of teeth: 40 pcs · Number of teeth: 41 pcs · Number of teeth: 42 pcs · Number of teeth: 43 pcs · Number of teeth: 44 pcs · Number of teeth: 45 pcs · Number of teeth: 46 pcs · Number of teeth: 47 pcs · Number of teeth: 48 pcs · Number of teeth: 49 pcs · Number of teeth: 50 pcs · Number of teeth: 51 pcs · Number of teeth: 52 pcs · Number of teeth: 53 pcs · Number of teeth: 54 pcs · Number of teeth: 55 pcs · Number of teeth: 56 pcs · Number of teeth: 57 pcs · Ø bolt circle: 106 mm · Ø inside: 94 mm · Ø mounting hole: 6.7 mm · Cranking (offset): 8 mm · Color: black
EUR 23.70
Collection only possible with online purchase and appointment.
