High-quality disc brake system for your Puch moped / moped, which can be fitted without any modifications.
All add-on parts are of the highest quality and accuracy of fit. The components are designed for the 5-star cast rim for Puch mopeds. The corresponding rim and matching EBR Harry forks can be found in the accessories section.
The brake calliper and brake lever are already fitted with brake fluid and therefore only need to be bolted on. The steel flex brake cable is 90 cm long. Bear this in mind when selecting the handlebars. All screw connections must be secured with Loctite. The distance between the mounting holes on the fork is 60 mm and they are fitted with an M8 thread.
The two spacers are mounted in the direction of travel as follows: left: 26.25 mm long / right: 23.5 mm long.
When you buy this complete set, you get a big percentage off the retail price of the individual parts.
Material: Cast aluminum · Surface: varnished · Color: gray · Cable length: 900 mm · Brake lever length (lever length): 162 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs · Ø Handlebars: 22 mm · Hole spacing: 60 mm, 32 mm · Thread type: M8x1.25 (standard thread)
Manufacturer: swiing® ingenious parts
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 11.95 mm · Thread type: MF12x1 (fine pitch thread) · Thread length: 25 mm · Total length: 220 mm
Manufacturer: swiing® ingenious parts · Drive: External hexagon · Screw head: Hexagon · Number of components: 5 pcs · Material: Steel · Surface: galvanized (blue)
| Puch |
Accessories & related products
EBR telescopic fork aluminum (Harry) silver | Puch
Manufacturer: EWC · Material: Aluminum · Material: Steel · Surface: chrome-plated · Surface: varnished · Color: Chrome · Color: silver · Spar end distance (center-center): 150 mm · Ø outer head tube: 26 mm · Ø head tube inside: 22 mm · Adjustable: Yes · Thread length: 57 mm · Head tube length: 200 mm · Total length: 705 mm · Thread type: MF26x1 (fine pitch thread) · Fork bridge - center wheel axle: 458 mm · Ø spars: 30 mm
EUR 300.20
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 26.90
EUR 2’690.00/l
Racing handlebar fork plate 8 cm / wide aluminum silver
Material: Aluminum · Surface: anodized · Color: silver · Ø outside: 22 mm · Fork plate holder length: 150 mm · Length handlebar ends: 215 mm · Clamping diameter: 22 mm · Crossbar: Yes · Ø Strut: 12 mm · Strut length: 260 mm · Mounting type: Fork plate · Width: 810 mm · Height: 80 mm
EUR 53.80
GPO handlebar fork plate 13 cm cross black
Manufacturer: GPO · Material: Steel · Surface: varnished · Color: black · Ø outside: 22 mm · Width: 665 mm · Fork plate holder length: 100 mm · Height: 130 mm · Mounting type: Fork plate · Length handlebar ends: 180 mm · Crossbar: Yes · Ø Strut: 12.5 mm · Strut length: 230 mm · Clamping diameter: 22 mm
EUR 30.50
EBR telescopic fork aluminum (Harry) black | Puch
Manufacturer: EWC · Material: Aluminum · Material: Steel · Surface: chrome-plated · Surface: varnished · Color: Chrome · Color: black · Spar end distance (center-center): 150 mm · Ø outer head tube: 26 mm · Ø head tube inside: 22.3 mm · Adjustable: Yes · Thread length: 58 mm · Head tube length: 200 mm · Total length: 680 mm · Thread type: MF26x1 (fine pitch thread) · Fork bridge - center wheel axle: 450 mm · Ø spars: 30 mm
EUR 294.10
Not in stock
Brake caliper, brake line, and brake lever for EBR forks
Material: Cast aluminum · Surface: varnished · Color: gray · Ø Handlebars: 22 mm · Thread type: M8x1.25 (standard thread) · Brake lever length (lever length): 162 mm · Number of fixing points: 4 pcs · Cable length: 900 mm · Hole spacing: 32 mm · Hole spacing: 60 mm · Mounting type: Nuts & bolts
EUR 202.10
Brake line 0.9 - 1.9 m (selection) black 28 / 90° incl. banjo bolts
Material: Rubber · Material: Steel · Color: black · Cable length: 900 mm · Cable length: 1000 mm · Cable length: 1150 mm · Cable length: 1400 mm · Cable length: 1600 mm · Cable length: 1700 mm · Cable length: 1900 mm · Mounting type: Screws · Thread type: MF10x1.25 (fine pitch thread)
EUR 29.30
Explore categories from Disc brake
Moped fans also bought
Hot 
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Reserve level: 70 mm
EUR 12.10
Hot
swiing® revival wheel axle LELEU & Grimeca wheel hub cast wheel rear | Puch
Ø outside: 11.8 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 11.9 mm · Total length: 185 mm · Thread type: MF12x1 (fine pitch thread) · Thread length: 26 mm · Thread length: 52.5 mm · Shank length: 100 mm · Width across flats: 19 mm
EUR 18.30
Brake caliper, brake line, and brake lever for EBR forks
Material: Cast aluminum · Surface: varnished · Color: gray · Ø Handlebars: 22 mm · Thread type: M8x1.25 (standard thread) · Brake lever length (lever length): 162 mm · Number of fixing points: 4 pcs · Cable length: 900 mm · Hole spacing: 32 mm · Hole spacing: 60 mm · Mounting type: Nuts & bolts
EUR 202.10
swiing® ingenious spacer sleeve set disc brake hub EBR Harry black | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Ø inside: 12.1 mm · Nominal diameter inside: 12 mm · Total length: 23.5 mm · Total length: 26.25 mm · Ø outside: 18 mm · Ø outside: 30 mm
EUR 31.80
Working late? Evening hours on Thursday until 20:00
