Blade-cooled 43 mm (61 cc) cylinder kit with 12 mm piston pin, suitable for your Sachs 50, 502, 50/2, 50/3, 50/4 moped / moped.
The timing of the cylinder was kept rather low, which is characterized by a very nice torque in the lower speed range.
The racing cylinder kit without sealing includes cylinder & piston kit without gaskets.
- Grey cast iron tuning cylinder with & 43.0 mm bore
- Slot-controlled
- 17x15 mm intake, 31 mm stud spacing
- Optimized overflow channels
- 2-piece outlet
- Improved control times
- No spindling of the engine housing necessary (Ø cylinder neck 46.0 mm)
- Exhaust thread: M40 x 1.5 mm
- Hole pattern for stud bolts: 60 x 40 mm for CH engines
- Pre-drilled hole pattern for stud bolts: 51 x 40 mm for DE engines
- Cylinder head hole pattern: 37 x 37 mm
- Incl. Ø 43 mm piston from the Italian manufacturer -GOL-
Note: 60 mm long M6 stud bolts must be used to mount the cylinder. Please observe the installation direction when assembling. The piston is inserted with the arrow pointing towards the outlet on the exhaust side.
Detailed assembly instructions are included.
Corresponding accessories such as gaskets, cylinder head, exhaust system etc. can be found in the accessories section.
Made by the BADASS brand.
| Nominal diameter | 43 mm |
| Manufacturer | BAD ASS |
| Material | Gray cast iron |
| Camouflaged | No |
| Displacement | 61 ccm |
| Crankshaft stroke | 42 mm |
| Ø cylinder neck | 46 mm |
| Ø Outlet outside | 40 mm |
| Ø outlet inside | 28 mm |
| Inlet window | 17 x 15 mm |
| Thread inlet | M5x0.8 (standard thread) |
| Hole spacing inlet | 31 mm |
| Ø piston pin (B) | 12 mm |
| Outlet type | Union nut |
| Thread outlet | MF40x1.5 (fine pitch thread) |
| Area of application | Tuning |
| Number of fixing points | 4 pcs |
| Hole pattern [mm] | 60 x 40 / 51 x 40 / 37 x 37 |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) |
Accessories & related products
swiing® revival stud bolt M5 x 23 inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Diameter: 4.9 mm · Thread type: M5x0.8 (standard thread) · Nominal diameter (thread): 5 mm · Total length: 23 mm · Thread length: 6 mm · Thread length: 12 mm · Pony OEM number: A3700 · Sachs OEM no.: 0640 016 101 · Sachs OEM no.: 0640 016 102
EUR 2.20
swiing® revival bolt set cylinder head galvanized | Sachs 503 / 50/2 / 50/3 / 50/4
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 5.85 mm · Color: silver · Shank length: 8 mm · Number of components: 12 pcs · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Total length: 34 mm · Drive: External hexagon · Width across flats: 10 mm · Area of application: Standard · Shank: Yes · Screw head: Hexagon · Strength class: 10.9 · Thread length: 22 mm
EUR 6.00
swiing® ingenious gasket cylinder head 41 mm | Sachs 503, 502, 50/2, 50/3, 50/4
Manufacturer: swiing® ingenious parts · Material: Aluminum · Place of use: Cylinder head · Nominal diameter: 41 mm · Thickness: 0.3 mm · Ø inside: 41.7 mm · Ø cylinder: 41 mm · Hole pattern [mm]: 37 x 37 · Area of application: Standard
EUR 6.00
swiing® ingenious 41 mm cylinder head tuning | Sachs 50/2, 50/3, 50/4
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Ø cylinder: 41 mm · Ø outside: 98 mm · Number of fixing points: 4 pcs · Height: 50 mm · Ø screw holder: 19 mm · Total length: 127 mm · Hole pattern [mm]: 37 x 37 · Width: 95 mm · Candle thread: long · Decompressor: M10x1.5 · Area of application: Standard
EUR 84.00
BAD ASS cylinder head L Ø 41-43 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: BAD ASS · Material: Aluminum · Ø cylinder: 41 - 43 mm · Ø outside: 108 mm · Area of application: Tuning · Hole pattern [mm]: 37 x 37 · Ø screw holder: 19.3 mm · Number of fixing points: 1 pcs · Number of fixing points: 4 pcs · Decompressor: M10x1.5
EUR 183.70
Explore categories from Cylinder
Moped fans also bought
swiing® revival exhaust nut M40x1.5 galvanized (for 32 mm pipe) | Sachs
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Union nut · Thread type: MF40x1.5 (fine pitch thread) · Nominal diameter (thread): 40 mm · Ø inside: 33.5 mm · Height: 19 mm · Ø outside: 46 mm
EUR 17.00
swiing® revival carburetor 17 mm Bing SSB 1/17/69
Nominal diameter: 17 mm · Manufacturer: swiing® revival parts · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SSB · Choke control: without choke · Total length: 132 mm · Width: 85 mm · Height: 100 mm · Nozzle size: 76 · Area of application: Standard · Area of application: Tuning · Hole spacing inlet: 31 mm · Ø fuel hose connection: 6 mm · Mounting type: Flange · Mixed oil connection: No · Vacuum connection: No · Camouflaged: No
EUR 155.50
BAD ASS cylinder head L Ø 41-43 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: BAD ASS · Material: Aluminum · Ø cylinder: 41 - 43 mm · Ø outside: 108 mm · Area of application: Tuning · Hole pattern [mm]: 37 x 37 · Ø screw holder: 19.3 mm · Number of fixing points: 1 pcs · Number of fixing points: 4 pcs · Decompressor: M10x1.5
EUR 183.70
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
