High-quality Streetpower racing muffler for your Puch Maxi N moped / moped.
The racing exhaust, which is handmade in Switzerland, is suitable for cylinder kits with a diameter of 43 - 45 mm and a straight outlet.
The tuning exhaust achieves its maximum performance in the upper speed range. The quality of workmanship corresponds to the standard of RHR exhausts and the performance level is roughly on a par with Homoet exhausts.
Note: If you want to continue using your pedal mechanism, you will need a pedal axle extension.
The main pedal can still be used, but may require minor adjustments.
The surface is bare and untreated. A protective coating is required to protect the exhaust system from rust.
The described axle extension, protective coating and other tuning parts can be found in the accessories section.
Branded product from the manufacturer AKOA.
Details
| Manufacturer | AKOA |
| Material | Steel |
| Surface | blank |
| Total length | 940 mm |
| Ø Silencer | 60 mm |
| Number of fixing points | 3 pcs |
| Mounting type | Nuts |
| Ø Flame tube outside | 30 mm |
| Ø Internal connection | 28 mm |
| Exhaust type | Cone / double cone |
Suitable for the following models
| Puch | E50 |
Accessories & related products
Simonini exhaust aluminum | Puch
Manufacturer: Simonini · Material: Steel · Surface: varnished · Ø outside: 95 mm · Total length: 830 mm · Ø Silencer: 60 mm · Ø Internal connection: 23 mm · Ø Flame tube outside: 29 mm · Exhaust type: Cone / double cone · Mounting type: Welded lug · Number of fixing points: 1 pcs · Flame tube attachment: Flange
EUR 222.40
HOMOET Exhaust P6 Special (longer center section) | Puch
Manufacturer: HOMOET · Material: Steel · Surface: blank · Mounting type: Welded lug · Total length: 935 mm · Ø Silencer: 50 mm · Ø outside: 88 mm · Ø Internal connection: 24 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Number of fixing points: 1 pcs · Flame tube attachment: Flange
EUR 354.70
Hot 
HOMOET exhaust P6 blank | Puch
Manufacturer: HOMOET · Material: Steel · Color: gray · Surface: raw · Surface: varnished · Ø outside: 88 mm · Ø Silencer: 50 mm · Flame tube attachment: Stud bolts & nuts · Mounting type: Tab · Number of fixing points: 2 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Total length: 900 mm
EUR 342.70
AKOA Exhaust Streetpower "handmade" | Puch Maxi S
Manufacturer: AKOA · Material: Steel · Surface: blank · Ø Internal connection: 28 mm · Ø Silencer: 60 mm · Ø Flame tube outside: 30 mm · Exhaust type: Cone / double cone · Mounting type: Nuts · Number of fixing points: 3 pcs · Total length: 940 mm
EUR 408.80
Moped fans like you also bought:
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Total length: 28 mm · Color: blue · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Area of application: Tuning
EUR 21.50
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Area of application: Standard
EUR 3.35
Intake manifold Athena AJH Inox
Manufacturer: Made in Netherlands · Material: Chrome steel (known as Nirosta®) · Ø inside: 21 mm · Ø External connection: 24 mm · Mounting type: Screws · Hole pattern [mm]: 60 x 40 · Number of fixing points: 4 pcs · Total height: 60 mm · Area of application: Tuning
EUR 99.70
Polini jet set (81 - 99) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Carburetor type: CP · Carburetor type: Coso · Drive: External hexagon · Carburetor type: Keihin · Carburetor type: PWK · Quantity: 10 pcs · Nozzle type: Main nozzle · Nozzle size: 83 · Nozzle size: 85 · Nozzle size: 87 · Nozzle size: 89 · Nozzle size: 91 · Nozzle size: 93 · Nozzle size: 95 · Nozzle size: 97 · Nozzle size: 99
EUR 48.00
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Exhaust · Reinforced: No · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Thickness: 3 mm · Ø inside: 27.4 mm · Hole spacing outlet: 42.5 mm · Area of application: Tuning
EUR 8.90
Polini CP 21 mm carburetor (hand choke) rubber flange
Manufacturer: Polini · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Height: 132 mm · Carburetor type: CP · Choke control: Hand choke · Nominal diameter: 21 mm · Nozzle thread: M5x0.8 (standard thread) · Total length: 71 mm · Ø Inside entrance: 42 mm · Mounting type: Rubber sleeve · Ø Output inside: 22.5 mm · Ø Air filter connection: 47 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Nozzle block: 35-12 · Nozzle size: 100 · Size of secondary nozzle: 40 · Width: 66 mm
EUR 168.30
Collection only possible with online purchase and appointment.
