Unique racing exhaust with offset silencer suitable for various Puch mopeds.
The exhaust is characterized by its very high-quality workmanship and is sometimes referred to as one of the most powerful racing exhausts for Puch racing mopeds.
The special feature of this Homoet model is that the center section is slightly longer, resulting in more power.
Ideal for cylinder kits between 38 and 42 mm. The tuning exhaust can only be fitted to cylinders with a straight outlet.
HOMOET DEMPER exhaust system made by hand in the Netherlands.
| Manufacturer | HOMOET |
| Material | Steel |
| Mounting type | Welded lug |
| Exhaust type | Cone / double cone |
| Flame tube attachment | Flange |
| Number of fixing points | 1 pcs |
| Puch | E50 |
Accessories & related products
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Thickness: 3 mm · Material: Graphite / Graphite · Place of use: Exhaust · Area of application: Tuning · Ø inside: 27.4 mm · Reinforced: No · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm
EUR 9.05
Moped fans also bought
swiing® ingenious pull starter Bosch / Ducati | Puch E50
Width: 150 mm · Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Ignition system: BOSCH · Color: Chrome · Ignition system: DUCATI · Color: black-matt · Height: 88 mm · Ø outside: 130 mm · Number of fixing points: 2 pcs · Total length: 160 mm · Hole spacing: 137.5 mm
EUR 183.00
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Drive: Slot · Drive: Triangular head · Color: silver · Thread length: 35 mm · Thread length: 50 mm · Thread type: M5x0.8 (standard thread) · Total length: 47 mm · Total length: 60 mm
EUR 15.80
GPO pedal cranks chrome (pair) | Puch
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Crank length (center-center): 156 mm · Ø Pedal wedge: 9.5 mm · Thread type: FG14.3 (9/16" 20G) · Ø Pedal axle: 16 mm · Wide intake: 28 mm · Total length: 180 mm · Cranking (offset): 37 mm · Cranking (offset): 49 mm
EUR 91.50
Not so nice 
Road Master 2.25 x 17" F-323 4.P.R. Allround
Manufacturer: Road Master · Tire width [inch]: 2.25 " · Wheel size [inch]: 17 " · Width [inch]: 2 1/4 · Color: black · Speed index: B = 50 km/h · Load capacity index: 39 = 136 kg · Profile type: F-323 4.P.R. · Tire type: Allround · Old designation: 21 x 2.25 · White wall: No · Tubeless (yes/no): Tubetype TT (requires hose)
EUR 36.50
GPO Brake support bolt short Inox | Puch Maxi, Supermaxi
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Ø shaft: 9.8 mm · Drive: Outer edge · Total length: 32 mm · Ø External head: 14 mm · Thread length: 13 mm · Shank: Yes · Shank length: 9.5 mm · Thread type: MF10x1 (fine pitch thread) · Number of components: 3 pcs · Width across flats SW: 13 mm · Width across flats SW: 17 mm · Area of application: Standard
EUR 15.80
Not in stock
Hot 
Jammer racing clutch special 65 ccm and more | Puch E50
Material: Steel · Thickness: 19 mm · Manufacturer: Jammer · Ø outside: 92.5 mm · Material addition: Steel · Recording type: Cone mounting · Number of jaws: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning · Number of springs: 3 pcs
EUR 231.90
Not in stock
Collection only possible with online purchase and appointment.
