Reproduction of the original E50 engine housing with 4 bearings and kick starter for your Puch moped / moped.
The dimensions correspond to the original housing. This means that all add-on parts such as rods, end plates, crankshafts or cylinders can be used.
As with the original, a cylinder and pinion lock has been installed, which must be removed when fitting tuning parts.
The housing parts are numbered. The engine number can be stamped in by the owner if required.
Threaded stud bolt: M6x1 mm
Matching attachments as well as a racing gear for your Puch Maxi can be found in the accessories section.
Branded product from the manufacturer AKOA.
| Material | Aluminum |
| Manufacturer | AKOA |
| Puch | E50 |
Ratings
Accessories & related products
GPO gasket set | Puch E50
Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Manufacturer: GPO · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Area of application: Standard · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 12.20
swiing® revival stud bolt set M6 x 106 | Puch
Material: Steel · Total length: 106 mm · Manufacturer: swiing® revival parts · Surface: galvanized (blue) · Diameter: 5.9 mm · Drive: External hexagon · Thread length: 13 mm · Thread length: 18.5 mm · Thread type: M6x1 (standard thread) · Width across flats: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 9.15
swiing® revival crankshaft "Original" with mounted bearings | Puch E50
Material: Steel · Manufacturer: swiing® revival parts · Cheek type: standard · Crankshaft stroke: 43 mm · Connecting rod length center-center: 90 mm · Weight: 873 g · Number of gears: 1 pcs · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Thread length: 11 mm · Thread length: 15 mm · Ø crank webs: 69.9 mm · Thread type: MF10x1 (fine pitch thread) · Ø Connecting rod eye: 15 mm · Area of application: Standard · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Puch OEM number: 349.1.10.115.0 · Puch OEM number: 900.6203 · Puch OEM number: 900.6233 · Puch OEM number: 901.3801 · Puch OEM number: 902.3835
EUR 172.70
Not in stock
Hot 
swiing® revival 38 mm cylinder kit 1.6 hp CH12 "Original" | Puch
Nominal diameter: 38 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Area of application: Standard · Camouflaged: Yes · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 50 ccm · Ø cylinder neck: 48 mm · Ø Inlet inside: 9 mm · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 19 mm · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 38 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Alternative version of the Puch OEM number: 349.7.10.105.0
EUR 129.50
Hot
swiing® revival 38 mm cylinder kit 1.6 hp CH12 Vertex-Edition "Original" | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 50 ccm · Nominal diameter: 38 mm · Hole spacing inlet: 38 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 20 mm · Ø Inlet inside: 9 mm · Area of application: Standard · Inlet window: 2 · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Decompressor: Yes
EUR 185.00
Moped fans also bought
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Material: Spring steel · Color: blue · Total length: 28 mm · Ø wire: 1.7 mm · Ø inside: 4.8 mm · Manufacturer: swiing® ingenious parts · Ø outside: 8.3 mm · Number of components: 3 pcs · Surface: coated · Area of application: Tuning
EUR 22.10
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Material: Steel · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Surface: galvanized (blue) · Cable length: 2200 mm · Area of application: Standard
EUR 2.95
swiing® revival screw set PVL ignition
Material: Steel · Manufacturer: swiing® revival parts · Number of components: 6 pcs · Surface: galvanized (blue) · Drive: Hexagon socket · Screw head: Cylinder head · Thread length: 25 mm · Thread length: 35 mm · Thread type: M4x0.7 (standard thread) · Shank: No · Shank: Yes
EUR 6.05
Collection only possible with online purchase and appointment.
