Special, hand-made H100A+ racing exhaust system for your Puch moped / moped with E50 engine and exhaust outlet.
This racing exhaust is ideal for cross or racing use and, compared to the ADDY H100A, generates a strong power band, especially in the low to medium speed range, thanks to the extended midrange. The ideal exhaust timing for these racing engines is around 160 to 185 rpm.
Notes: We recommend using nuts with a key width of 8 or 9 mm for fastening to the outlet.
When used on a standard Puch Maxi frame, we recommend replacing the original fuel tap with an intermediate piece in conjunction with a 90° outgoing fuel tap.
Other complete racing systems as well as engine cases, cylinder kits and the aforementioned fuel outlet parts can be found in the accessories section.
Quality product from the ADDY by Schöb Engineering brand.
| Manufacturer | ADDY |
| Material | Steel |
| Surface | varnished |
| Color | black |
| Total length | 870 mm |
| Ø Silencer | 55 mm |
| Mounting type | Nuts & bolts, Stud bolts & nuts |
| Exhaust type | Cone / double cone |
| Number of fixing points | 3 pcs |
| Flame tube attachment | Flange |
| Puch | E50 |
Ratings
Accessories & related products
swiing® revival special nut M6 SW8 (sprocket ref. back pedal / intake manifold)
Material: Steel · Height: 6 mm · Manufacturer: swiing® revival parts · Surface: galvanized (blue) · Nut type: Hexagon nut · Drive: External hexagon · Thread type: M6x1 (standard thread) · Width across flats: 8 mm
EUR 3.60
Gilardoni italkit cylinder head 47 mm (75 ccm)
Material: Aluminum · Total length: 155 mm · Height: 58 mm · Number of fixing points: 4 pcs · Manufacturer: Gilardoni italkit · Surface: sandblasted · Ø cylinder: 47 mm · Width: 155 mm · Ø screw holder: 6.5 mm · Candle thread: long · Area of application: Tuning · Hole pattern [mm]: 44 x 44
EUR 85.00
Hot 
MLM exhaust "Crazy Pipe" black straight outlet | Puch
Manufacturer: MLM · Material: Steel · Surface: varnished · Color: black · Ø Silencer: 45 mm · Ø outside: 91 mm · Total length: 945 mm · Mounting type: Nuts & bolts · Ø Internal connection: 22 mm · Number of fixing points: 3 pcs · Exhaust type: Cone / double cone · Flame tube attachment: Stud bolts & nuts
EUR 425.60
Not in stock
ADDY exhaust H100A | Puch
Manufacturer: ADDY · Material: Steel · Surface: varnished · Color: black · Ø Silencer: 55 mm · Total length: 820 mm · Mounting type: Nuts & bolts · Mounting type: Stud bolts & nuts · Number of fixing points: 3 pcs · Exhaust type: Cone / double cone · Flame tube attachment: Flange
EUR 308.40
Moped fans also bought
Dell'Orto 21 mm PHBG CS carburetor hand choke
Nominal diameter: 21 mm · Material: Aluminum · Color: black · Total length: 82 mm · Height: 125 mm · Manufacturer: Dell'Orto · Component group Carburetor: Carburetor complete · Carburetor type: PHBG AS · Width: 72 mm · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Mounting type: Plug connection clamped · Ø without reducing sleeve: 26 mm · Nozzle size: 92 · Ø Internal connection: 24 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 38 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Area of application: Tuning · Mixed oil connection: Yes · Vacuum connection: Yes · Choke nozzle size: 60 · Nozzle block: 262AU · Camouflaged: No · Size of secondary nozzle: 50
EUR 148.00
swiing® revival nozzle set M5 (80 - 100) Dell'Orto SHA, PHBG
Material: Brass · Total length: 8 mm · Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Quantity: 10 pcs · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100
EUR 25.80
Brake caliper, brake hose & brake lever for EBR forks
Number of fixing points: 4 pcs · Color: gray · Material: Cast aluminum · Surface: varnished · Ø Handlebars: 22 mm · Thread type: M8x1.25 (standard thread) · Hole spacing: 32 mm · Hole spacing: 60 mm · Mounting type: Nuts & bolts · Brake lever length (lever length): 162 mm · Cable length: 900 mm
EUR 203.50
Collection only possible with online purchase and appointment.
