Professional Addy E50 4-bearing racing engine case, spindled to ” 52 mm for your Puch moped / moped.
Thanks to the gouging, it is possible to fit large 47 mm cylinder kits such as those from Gilardoni Italkit, Airsal or Parmakit. The slightly larger cylinder mounting surface ensures that tuning cylinders still have sufficient sealing surface available.
The housing was specially designed and manufactured for the tuning sector, which is why some components such as the flat surface for mounting a kick starter have been omitted.
The case has the following special features:
- Enlarged sealing surfaces in the area of the cylinder base
- slightly outwardly offset housing screws, leaving more space for larger overflow ducts
- prepared milling surfaces for GME inlet systems
- Fitting pins for secure positioning when assembling the housings
- Additional threads for a more flexible edge assembly
- Extra-large cooling fins in the lower area for better temperature dissipation and thus reduced wear on the crankshaft bearings
- Pin holder, 3 pcs. M6 thread at the original spacing
- Approved in all SAM moped racing and moped cross categories
- Perforation pattern for cylinder studs: 44 x 44 mm
Installation tips:
- Using the shims supplied, various gearboxes with different positions, such as those of the 3-bearing or MBR gearboxes, can be cleanly spaced out. Before reassembly, make sure that the gear wheel is properly centered.
| Manufacturer | ADDY |
| Material | Aluminum |
| Puch | E50 |
Accessories & related products
Parmakit 47 mm cylinder kit with cylinder head | Puch
Manufacturer: Parmakit · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Nominal diameter: 47 mm · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Hole spacing inlet: 46 mm · Ø cylinder neck: 51 mm · Ø outlet inside: 27.5 mm · Inlet window: 30 x 18 · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 46 mm · Hole pattern [mm]: 44 x 44 · Decompressor: No · Outlet type: slanted · Number of fixing points: 4 pcs · Thread outlet: M6x1 (standard thread) · Area of application: Tuning
EUR 488.30
Parmakit 47 mm cylinder kit without head | Puch
Material: Aluminum · Surface: sandblasted · Nominal diameter: 47 mm · Manufacturer: Parmakit · Number of fixing points: 4 pcs · Camouflaged: No · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Ø cylinder neck: 49.5 mm · Area of application: Tuning · Ø piston pin (B): 12 mm · Inlet window: 29 x 16 · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 28 mm · Hole spacing outlet: 45 mm · Outlet type: slanted · Hole spacing inlet: 46 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 378.40
Airsal 47 mm cylinder kit angled exhaust | Puch
Nominal diameter: 47 mm · Manufacturer: Airsal · Camouflaged: No · Surface: sandblasted · Displacement: 75 ccm · Material: Aluminum · Crankshaft stroke: 43 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Area of application: Tuning · Outlet type: slanted · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44
EUR 207.50
Airsal 47 mm cylinder kit (straight exhaust) | Puch
Material: Aluminum · Surface: sandblasted · Nominal diameter: 43 mm · Manufacturer: Airsal · Number of fixing points: 4 pcs · Camouflaged: No · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Ø cylinder neck: 51 mm · Area of application: Tuning · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 38 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44
EUR 256.30
Moped fans also bought
Oil filler plug with sealing ring | Puch Maxi
Material: Steel · Surface: galvanized (blue) · Total length: 14.6 mm · Drive: Slot · Screw head: Lens head · Ø External head: 14 mm · Thread length: 6 mm · Thread type: M10x1.5 (standard thread) · Number of components: 2 pcs · Puch OEM number: 364.1.10.660.1
EUR 4.30
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Width across flats Screw: 13 mm · Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Drive: Slot · Color: silver · Screw head: Hexagon · Thread length: 12 mm · Thread type: M8x1.25 (standard thread) · Total length: 18 mm · Puch OEM number: 901.1053
EUR 4.30
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Surface: galvanized (blue) · Material: Steel · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Number of components: 1 pcs · Nipple length: 5 mm · Area of application: Standard
EUR 3.40
MBR clutch basket 18 teeth Racing straight | Puch E50
Manufacturer: MBR · Material: Steel · Area of application: Tuning · Number of teeth: 18 pcs · Recording type: Interlocking · Toothing type: straight toothed · Ø outside: 99.5 mm · Ø inside: 15 mm · Ø inside: 17 mm · Ø Receptacle: 31 mm · Height: 49 mm
EUR 225.80
swiing® ingenious screw oil drain aluminum magnetic | Puch
Width across flats Screw: 13 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Drive: External hexagon · Color: graphite colors · Screw head: Hexagon · Thread length: 10 mm · Thread type: M8x1.25 (standard thread) · Tightening torque: 3 N/m
EUR 14.50
Collection only possible with online purchase and appointment.
