Professionally bored to Ø 52 mm, this Addy E50 4-bearing racing engine case is designed for your Puch moped.
The milled-out design allows for the installation of large 47 mm cylinder kits, such as those from Gilardoni Italkit, Airsal, or Parmakit. The slightly enlarged cylinder mounting surface ensures that aftermarket cylinders still have sufficient sealing surface area.
The housing was specifically designed and manufactured for the tuning market; therefore, some components—such as the mounting surface for a kickstarter—have been omitted.
The housing features the following special characteristics:
- enlarged sealing surface in the area of the cylinder base
- Casing screws slightly offset outward, leaving more space for larger overflow channels
- A milled surface prepared for GME intake systems
- Alignment pins for secure positioning when assembling the housing halves
- Additional threads for more flexible ignition system installation
- Extra-large cooling fins in the lower section for better heat dissipation and thus reduced wear on the crankshaft bearings
- Stand mounts, 3 M6 threads at the original spacing
- Approved for all SAM moped racing and moped cross categories
- Cylinder stud hole pattern: 44 x 44 mm
Installation tips:
- Using the included washers, different gear wheels with varying positions—such as those in 3-bearing or MBR transmissions—can be properly spaced. Before assembly, be sure to check that the gear wheel is properly centered.
- Use the following screw lengths: 7 pcs. M6 x 35 mm / 6 pcs. M6 x 50 mm
Note: If you plan to use a center stand, we recommend using a sturdy center stand, as there is a stand stop only on the left side.
High-quality product from the ADDY by Schöb Engineering brand.
Alternative to the original Puch part number: 349.3.10.332.0
| Manufacturer | ADDY |
| Material | Aluminum |
| Puch | E50 |
Accessories & related products
Parmakit 47 mm cylinder kit with cylinder head | Puch
Manufacturer: Parmakit · Camouflaged: No · Area of application: Tuning · Material: Aluminum · Surface: sandblasted · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 47 mm · Ø cylinder neck: 51 mm · Ø outlet inside: 27.5 mm · Hole spacing inlet: 46 mm · Inlet window: 30 x 18 mm · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Hole pattern [mm]: 44 x 44 · Outlet type: slanted · Hole spacing outlet: 46 mm · Thread outlet: M6x1 (standard thread) · Decompressor: No
EUR 490.20
Parmakit 47 mm cylinder kit without head | Puch
Nominal diameter: 47 mm · Manufacturer: Parmakit · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 49.5 mm · Ø outlet inside: 28 mm · Hole spacing inlet: 46 mm · Inlet window: 29 x 16 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Area of application: Tuning · Ø piston pin (B): 12 mm · Outlet type: slanted · Number of fixing points: 4 pcs · Hole spacing outlet: 45 mm · Thread outlet: M6x1 (standard thread) · Decompressor: No
EUR 379.90
Airsal 47 mm cylinder kit angled exhaust | Puch
Nominal diameter: 47 mm · Manufacturer: Airsal · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Hole spacing inlet: 38 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Area of application: Tuning · Ø piston pin (B): 12 mm · Outlet type: slanted · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread)
EUR 208.30
Airsal 47 mm cylinder kit (straight exhaust) | Puch
Nominal diameter: 43 mm · Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 51 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No · Area of application: Tuning
EUR 257.30
Explore categories from Gearbox & housing (motor)
Moped fans also bought
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Width across flats Screw: 13 mm · Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Surface: galvanized (blue) · Total length: 18 mm · Color: silver · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Thread type: M8x1.25 (standard thread) · Thread length: 12 mm · Puch OEM number: 901.1053
EUR 4.30
swiing® revival Screw Set, Engine, Galvanized, Small | Puch E50
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: Cross recess · Drive: Hexagon socket · Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Puch OEM number: 900.1216 · Puch OEM number: 901.1308
EUR 12.10
MBR clutch basket 18 teeth Racing straight | Puch E50
Height: 49 mm · Ø inside: 15 mm · Ø inside: 17 mm · Ø outside: 99.5 mm · Manufacturer: MBR · Material: Steel · Area of application: Tuning · Toothing type: straight toothed · Number of teeth: 18 pcs · Recording type: Interlocking · Ø Receptacle: 31 mm
EUR 226.60
Hot 
swiing® ingenious crankshaft "High End" with mounted bearings | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Cheek type: Full cheeks · Crankshaft stroke: 43 mm · Connecting rod length center-center: 90 mm · Weight: 968 g · Number of gears: 1 pcs · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Thread type: MF10x1 (fine pitch thread) · Thread length: 11 mm · Ø Connecting rod eye: 15 mm · Thread length: 15 mm · Area of application: High End · Area of application: Racing · Area of application: Tuning · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm
EUR 226.60
Not in stock
Working late? Evening hours on Thursday until 20:00
