Adjustable oil pressure shock absorbers in black with chrome-plated coil spring for your moped, moped and small motorcycle.
The hardness or preload of the springs can be adjusted in five stages thanks to the special spring mount. The rear springs should always be secured with large washers to prevent the bearing bushes from shifting if lateral forces occur.
Length (mount – mount): 340 mm
Ø outer spiral spring: 52 mm
Ø spars: 32 mm
Ø bushings for fastening: 10 mm / 12 mm
Color: black / chrome
The scope of delivery corresponds to one pair.
You can find rear springs from other manufacturers as well as the washers and fastening material in the accessories section.
Quality product from the manufacturer YSS.
Details
| Manufacturer | YSS |
| Material | Steel |
| Surface | varnished, chrome-plated |
| Color | black, Chrome |
| Damping type | Hydraulic (oil) |
| Adjustable | Yes |
| Ø Fastening inside | 10 mm, 12 mm |
| Ø outside | 52 mm |
| Ø spars | 32 mm |
| Mounting type | Nuts & bolts |
| Number of fixing points | 2 pcs |
| Hole spacing | 340 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Area of application: Chemistry · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.80
EUR 2’680.00/l
MKX shock absorber 34 cm black
Manufacturer: MKX · Surface: varnished · Damping type: Spring · Adjustable: Yes · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm · Ø outside: 46 mm · Hole spacing: 340 mm · Number of fixing points: 2 pcs · Mounting type: Nuts & bolts · Color: black
EUR 61.00
Moped fans like you also bought:
Return spring brake plate | Puch Maxi
Spring design: Nose feather · Spring design: Torsion spring · Ø inside: 25.5 mm · Ø outside: 30 mm · Length spring hook: 50 mm · Leg length: 45 mm · Ø wire: 2.4 mm · Material: Spring steel · Surface: galvanized (blue) · Area of application: Original · Area of application: Standard · Total length: 125 mm
EUR 6.00
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Area of application: Standard · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø outside: 8 mm · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Ø Bundle: 6 mm · Screw head: Hexagon · Thread type: M6x1 (standard thread) · Total length: 15 mm · Width across flats SW: 7 mm · Thread length: 7 mm
EUR 3.05
Magura set screw M6x34 mm lock nut SW8
Manufacturer: Magura · Width across flats nut: 8 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø cable holder: 3.05 mm · Thread type: M6x1 (standard thread) · Slotted: No · Ø Receptacle: 7.05 mm · Thread length: 24 mm · Width across flats Screw: 8 mm · Total length: 34 mm
EUR 3.05
NGK CR4 Racing ignition cable & plug High End red
Manufacturer: NGK · Material: Silicone · Color: red · Ø cable: 7 mm · Spark plug socket: SAE · Cable available: Yes · Cable length: 500 mm · Suppressed: Yes · Resistance: 5000 Ω · Component group Carburetor: Ignition cable · Component group Carburetor: Spark plug connector
EUR 40.20
Collection only possible with online purchase and appointment.
