Black, adjustable shock absorbers for your moped, moped and small motorcycle.
The height or preload of the shock absorbers can be adjusted using the special spring mount.
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting in the event of lateral forces.
The scope of delivery includes one pair.
Rear springs from other manufacturers, the matching adjustment key, washers and fastening material can be found in the accessories section.
Branded product from the manufacturer Xtreme.
| Manufacturer | Xtreme |
| Material | Steel, Aluminum |
| Surface | varnished |
| Color | black |
| Damping type | Spring |
| Adjustable | Yes |
| Ø spars | 30 mm |
| Ø outside | 49 mm |
| Ø Fastening inside | 10 mm |
| Number of fixing points | 2 pcs |
| Mounting type | Nuts & bolts |
| Hole spacing | 300 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.70
EUR 2’670.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Surface: varnished · Damping type: Hydraulic (oil) · Adjustable: Yes · Color: black · Ø Fastening inside: 10 mm · Ø spars: 32 mm · Number of fixing points: 2 pcs · Ø outside: 52 mm · Mounting type: Nuts & bolts · Hole spacing: 330 mm
EUR 170.80
Moped fans also bought
Spotlight round Ø 13 cm chrome / black
Material: Sheet metal (steel) · Test mark: none · Bulb holder: BA15d · Housing material: Metal · Surface: chrome-plated · Surface: varnished · Color: Chrome · Color: black · Color: transparent · Lens material: Plastic · Mounting type: Screws · Ø outside: 130 mm · Speedometer recording: None · Height: 147 mm · Thread size: M6 · Switch included: No · Battery operated: No · Number of fixing points: 2 pcs · Width: 134 mm · Depth: 80 mm · Area of application: Standard
EUR 30.40
Not in stock
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Place of use: Frame (+ tank) · Material: Polyvinyl chloride (PVC) · Color: black · Color: white · Width: 123 mm · Width: 230 mm · Width: 330 mm · Height: 26 mm · Height: 60 mm · Height: 65 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant
EUR 11.50
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø Cable bushing: 1.6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Total length: 6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Thread length: 4 mm
EUR 2.45
swiing® revival 17" front fender square Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Shape of the mudguard: angular · Wheel size [inch]: 17 " · Total length over ends: 565 mm · Scope: 740 mm · Wide mudguard profile: 82 mm · Mounting type: Nuts & bolts · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 200 mm
EUR 42.60
Collection only possible with online purchase and appointment.
