Wheel bearing shell set, Ø 32 mm, with retaining ring for mounting the wheel hub on your moped, scooter, or small motorcycle.
The bearing cups hold the ball bearings and are required to assemble the complete wheel axle.
The package includes wheel bearing cups and dust rings.
Note: The dust ring with felt is used on the brake side.
You can find matching ball bearings, speedometer drives, and bearing grease in the accessories section.
| Ø Bundle | 37.5 mm |
| Material | Steel |
| Ø inside | 28 mm |
| Ø outside | 32 mm |
| Ø bore | 13.8 mm |
| Height | 14 mm |
Accessories & related products
Transval speedo drive 17" with lugs 11 mm axle (for VDO speedo cable) | Puch & Sachs
Place of use: left · Place of use: right · Ø outside: 41 mm · Manufacturer: Transval · Material: Aluminum · 4-edge speedometer cable: 1.8 mm · 4-edge speedometer cable: 2.6 mm · Thread type: MF10x1 (fine pitch thread) · Ø axle: 11 mm · Ø mounting hole: 11 mm · Wheel size: 17 "
EUR 42.80
Transval speedo drive 17" with 12 mm axle | Puch Maxi S / N, X30 Sport NS / NL, NG-2AH, X30 Velux
Place of use: left · Place of use: right · Ø outside: 41 mm · Manufacturer: Transval · Material: Aluminum · 4-edge speedometer cable: 2.6 mm · Thread type: MF10x1 (fine pitch thread) · Ø axle: 12 mm · Ø mounting hole: 12 mm · Wheel size: 17 "
EUR 44.00
GPO speedo drive 17" with lugs 11 mm axle (for VDO speedo cable) | Puch & Sachs
Place of use: left · Place of use: right · Ø outside: 41 mm · Manufacturer: GPO · Material: Aluminum · 4-edge speedometer cable: 1.8 mm · 4-edge speedometer cable: 2.6 mm · Thread type: MF10x1 (fine pitch thread) · Ø axle: 11 mm · Ø mounting hole: 11 mm · Wheel size: 17 "
EUR 34.20
GPO speedo drive 17" with lugs 12 mm axle | Puch Maxi S / N, X30 Sport NS / NL, NG-2AH, X30 Velux
Place of use: left · Place of use: right · Thread type: MF10x1 (fine pitch thread) · Manufacturer: GPO · Material: Aluminum · Ø axle: 12 mm · 4-edge speedometer cable: 1.8 mm · 4-edge speedometer cable: 2.6 mm · Ø mounting hole: 12 mm · Ø outside: 41 mm · Wheel size: 17 "
EUR 34.20
Explore categories from Hub & axle
Moped fans also bought
Hot 
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Cable length: 2200 mm · Nipple shape: Pears · Area of application: Standard · Nipple length: 10 mm
EUR 2.95
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Rolling circumference: 1448 mm · Color: gray · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.05 mm · Ø Pin: 4 mm
EUR 23.20
NTN 6201 2RS ball bearing 12/32/10
Bearing type: Deep groove ball bearing · Stock number: 6201 · Inner ring width: 10 mm · Manufacturer: NTN · Ball bearing closed: Yes · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Ø outside: 32 mm · Ø inside: 12 mm · Width: 10 mm
EUR 12.10
Bearing cone M11x1 mm
Material: Steel · Surface: gas nitrided · Color: graphite colors · Ø outside: 19 mm · Thread type: MF11x1 (fine pitch thread) · Height: 12 mm · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Ø ball [inch] / [mm]: 3/16" (4.78 mm) · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Width across flats: 15 mm
EUR 9.70
swiing® revival wheel axle set V905 wheel hub front | Sachs
Thread type: MF11x1 (fine pitch thread) · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Ball bearing closed: No · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Diameter: 11 mm · Total length: 145 mm · Ø shaft: 11 mm · Width across flats: 17 mm
EUR 42.80
Working late? Evening hours on Thursday until 20:00
