
Silicone tank emblem «Ciao» for your Piaggio Ciao moped / moped.
The sticker has the look of brushed aluminum and the golden yellow border around the lettering adds a visual accent.
The change from the small to the large stickers took place on the Ciao in the middle of the SC model series. As a result, this 115x27 mm sticker fits into all large tank inserts of the SC, PX and C24 models.
From the factory, this 3D sticker was installed in Switzerland on early C24 models from 1998 onwards, and was then replaced by the colored and cut-out «Ciao» 3D sticker on the last models produced before 2006.
Sticker dimensions: 115x27x2 mm
Material: silicone
Durability: petrol resistant
Price per piece.
The area to be covered should be free of grease and dirt in order to provide a firm hold for the adhesive.
You will find suitable cleaning cloths and other decals in the accessories section.
Quality product from the Italian manufacturer Piaggio in original equipment quality.
Original Piaggio spare part number: 813875
Alternative to the original Piaggio spare part number: 298723, 814489
| Manufacturer | Piaggio |
| Material | Silicone |
| Width | 115 mm |
| Height | 27 mm |
| Mounting type | glue |
| Thickness | 2 mm |
| Rear side texture | Adhesive |
| Piaggio OEM number | 813875 |
| Alternative version of the Piaggio OEM number | 298723, 814489 |
| Piaggio | Ciao - C24 |
Accessories & related products
swiing® revival Tank Decal "ciao" Gray 86 x 26 mm | Piaggio Ciao P / SC
Manufacturer: swiing® revival parts · Width: 86 mm · Height: 28 mm · Material: Polyvinyl chloride (PVC) · Color: black · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Place of use: Frame (+ tank) · Transferfolie: No
EUR 7.85
swiing® revival Tank Decal "Ciao" Red 70 x 28 mm | Piaggio Ciao P / C9
Manufacturer: swiing® revival parts · Width: 70 mm · Material: Polyvinyl chloride (PVC) · Color: red · Height: 28 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Place of use: Frame (+ tank) · Transferfolie: No
EUR 7.25
Tank sticker "PIAGGIO" 3D silicone 115 x 27 mm original | Piaggio Ciao, SI, Bravo
Manufacturer: Piaggio · Width: 27 mm · Material: Silicone · Color: black · Color: silver · Total length: 115 mm · Height: 1.5 mm · Rear side texture: Adhesive · Consistency: petrol resistant · Place of use: Tank (+ frame) · Transferfolie: No · Piaggio OEM number: 298723
EUR 15.80
swiing® revival "Ciao" 3D Silicone Tank Decal, 109 x 25 mm | Piaggio Ciao
Manufacturer: swiing® revival parts · Width: 109 mm · Material: Silicone · Color: Chrome · Color: orange · Height: 25 mm · Rear side texture: Adhesive · Thickness: 1.2 mm · Piaggio OEM number: 814489 · Alternative version of the Piaggio OEM number: 298723 · Alternative version of the Piaggio OEM number: 813875
EUR 17.00
"kat" Gel Stickers (Left & Right) Side Protection | Piaggio Ciao, SI, Grillo
Manufacturer: swiing® revival parts · Width: 155 mm · Material: Silicone · Surface: rubberized · Color: black · Color: gold · Color: gray · Color: yellow · Height: 22 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Place of use: Housing cover · Border: contour cut · Transferfolie: No
EUR 26.40
Explore categories from Gasoline & Tank
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
EUR 12.10
Handlebar fork plate 24 cm Franz black
Width: 450 mm · Material: Steel · Surface: varnished · Color: black · Ø outside: 22 mm · Fork plate holder length: 60 mm · Height: 240 mm · Mounting type: Fork plate · Length handlebar ends: 180 mm · Clamping diameter: 22 mm · Crossbar: Yes · Ø Strut: 12.5 mm · Strut length: 160 mm
EUR 48.90
swiing® ingenious 17 mm SRF carburetor camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Manufacturer: swiing® ingenious parts · Width: 47 mm · Height: 89 mm · Height: 109 mm · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Total length: 65 mm · Carburetor type: SRE · Nominal diameter: 17 mm · Ø Inside entrance: 17 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Ø Internal connection: 23 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Mounting type: Plug connection clamped · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 147.00
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Camouflaged: Yes · Number of fixing points: 2 pcs · Hole spacing inlet: 38 mm · Ø inside: 17 mm · Ø External connection: 23 mm · Height flange center hole: 42 mm · Total length: 38 mm · Mounting type: Stud bolts & nuts · Total height: 53.5 mm
EUR 55.00











