Authentic fuel tank decal for your Puch X30 Turbo moped.
This is a high-quality, UV- and gasoline-resistant vinyl decal. To make installation easier, the decal has been mounted on a transfer sheet.
The surface to be covered should be free of grease and contaminants to ensure the sticker adheres firmly.
You can find appropriate cleaning cloths and additional stickers in the accessories section.
A nostalgic product from the premium swiing® brand that meets the highest standards.
| Width | 68 mm |
| Manufacturer | swiing® revival parts |
| Material | Polyvinyl chloride (PVC) |
| Color | white |
| Place of use | Tank (+ frame) |
| Rear side texture | Adhesive |
| Height | 50 mm |
| Consistency | UV-resistant |
| Border | contour cut |
| Transferfolie | No |
| Puch | ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) |
Accessories & related products
"Sport" White Tank Decal, 97 x 87, Vinyl Cut | Puch X30 NS, NG-2A
Manufacturer: swiing® revival parts · Material: Polyvinyl chloride (PVC) · Place of use: Tank (+ frame) · Color: black · Color: white · Width: 97 mm · Height: 87 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Transferfolie: Yes
EUR 15.30
Sticker tank "sport" black 97 x 87 foil plot | Puch X30 NS
Manufacturer: swiing® revival parts · Material: Polyvinyl chloride (PVC) · Place of use: Tank (+ frame) · Color: black · Width: 97 mm · Height: 87 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Transferfolie: Yes
EUR 17.00
swiing® revival "RACING" Tank Sticker, Black | Puch X30 NG-2AH
Manufacturer: swiing® revival parts · Material: Polyvinyl chloride (PVC) · Place of use: Tank (+ frame) · Width: 105 mm · Height: 67 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Transferfolie: No
EUR 18.30
swiing® revival "RACING" Tank Sticker, White | Puch X30 NG-2AH
Manufacturer: swiing® revival parts · Material: Polyvinyl chloride (PVC) · Place of use: Tank (+ frame) · Width: 96 mm · Height: 64 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Transferfolie: No
EUR 18.30
swiing® revival "X30" Sticker, 68 x 50 mm, black | Puch X30 Turbo
Manufacturer: swiing® revival parts · Material: Polyvinyl chloride (PVC) · Place of use: Tank (+ frame) · Color: black · Width: 68 mm · Height: 50 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Border: contour cut · Transferfolie: No
EUR 24.10
Explore categories from Stickers & nameplates
Moped fans also bought
swiing® revival Decal Set, Tank, White, Vinyl Cut | Puch X30
Manufacturer: swiing® revival parts · Material: Polyvinyl chloride (PVC) · Place of use: Tank (+ frame) · Color: white · Width: 290 mm · Height: 51 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: oil-resistant · Consistency: petrol resistant · Transferfolie: Yes
EUR 23.20
swiing® revival Sticker “OIL-BENZINE MIX 1:50” 63 x 25 mm black | Puch
Manufacturer: swiing® revival parts · Material: Polyvinyl chloride (PVC) · Place of use: Tank (+ frame) · Width: 63 mm · Height: 25 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Transferfolie: No
EUR 7.95
GPO Gear Ring 40 T. Black | Puch Maxi, X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Hole spacing: 36.5 mm · Material: Steel · Surface: powder-coated · Color: black · Number of teeth: 40 pcs · Ø inside: 94 mm · Ø bolt circle: 106 mm · Ø mounting hole: 6.5 mm · Number of fixing points: 6 pcs · Hole spacing 2: 68 mm · Cranking (offset): 8 mm
EUR 24.40
Hot 
swiing® revival wheel axle LELEU & Grimeca wheel hub cast wheel rear | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 11.9 mm · Shank length: 100 mm · Total length: 185 mm · Thread type: MF12x1 (fine pitch thread) · Ø outside: 11.8 mm · Thread length: 26 mm · Thread length: 52.5 mm · Width across flats: 19 mm
EUR 18.30
Working late? Evening hours on Thursday until 20:00
