Stainless steel retaining plates for securing gear rings with a 5-hole mounting pattern and 72° pitch on your moped equipped with a Grimeca hub.
The pre-stressed plates are used to secure the bolts on the drive ring. During installation, two plates must be stacked on top of each other. To do this, the locking tab on the lower plate must be cut off or tapped straight.
Number of plates: 3 pcs.
Thickness: 1 mm
Pitch: 72°
Bolt circle diameter: 115 mm
Number of mounting points: 5 pcs.
Material: Chrome steel (commonly known as “Nirosta”)
You can find matching sprockets and screw sets in the accessories section.
A nostalgic product meeting the highest standards from the swiing® quality brand.
| Manufacturer | swiing® revival parts |
| Material | Chrome steel (colloquially known as stainless steel) |
| Thickness | 1 mm |
| Number of lobes | 6 pcs |
| Ø bolt circle | 115 mm |
| Universal |
| Puch |
| Sachs |
Accessories & related products
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Chain pitch: 1/2" x 3/16" · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø bore: 4.05 mm · Ø Pin: 4 mm
EUR 23.20
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.90
EUR 2’690.00/l
ESJOT Gear Ring 51 T. 5-Hole Grimeca, Galvanized
Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Number of teeth: 51 pcs · Ø inside: 98 mm · Ø mounting hole: 6.5 mm · Cranking (offset): 8 mm · Number of fixing points: 5 pcs · Color: silver
EUR 48.90
ESJOT 45-tooth Grimeca 5-hole sprocket, galvanized
Surface: galvanized (blue) · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Color: silver · Number of teeth: 45 pcs · Ø bolt circle: 115 mm · Ø inside: 98 mm · Ø mounting hole: 6.5 mm · Cranking (offset): 8 mm · Number of fixing points: 5 pcs
EUR 48.90
ESJOT Gear Ring 41 T. 5-Hole Grimeca
Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Number of teeth: 41 pcs · Ø bolt circle: 115 mm · Ø inside: 98 mm · Ø mounting hole: 6.5 mm · Cranking (offset): 8 mm · Number of fixing points: 5 pcs · Color: silver
EUR 48.90
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø outside: 8 mm · Total length: 15 mm · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Ø Bundle: 6 mm · Screw head: Hexagon · Width across flats: 7 mm · Thread type: M6x1 (standard thread) · Thread length: 7 mm · Area of application: Standard
EUR 3.05
swiing® revival rear fender Inox | Pony GTX, GTA (P1616)
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Folding the ends: not folded · Wheel size: 17 " · Shape of the mudguard: partly round · Total length over ends: 615 mm · Scope: 890 mm · Wide mudguard profile: 78 mm · Height of mudguard profile: 36 mm · Total height from support surface to top edge: 268 mm · Mounting type: Nuts & bolts
EUR 61.20
swiing® revival wheel axle M11x1 x 180 | Piaggio Boxer
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Ø shaft: 10.95 mm · Shank length: 30 mm · Total length: 180 mm · Thread length: 75 mm · Piaggio OEM number: 135693
EUR 20.70
Working late? Evening hours on Thursday until 20:00
