Rear mudguard made of stainless steel for various mopeds with 17-inch rims.
The highly polished surface ensures a first-class look and gives your moped the necessary shine.
Since the mudguard is folded at the rear, there is no sharp edge, which significantly reduces the risk of injury.
Tabs for cable routing are attached to the inside.
The mudguard deliberately has no holes for struts so that you can drill them individually.
Shape: round
Width of mudguard profile (A): 80 mm
Height of mudguard profile (B): 35 mm
End: closed folded / not folded
Material: chrome steel (colloquially known as stainless steel), highly polished
Total height from support surface to top edge (C): 325 mm
Total length over ends (D): 623 mm
Circumference (E): 1006 mm
Further parts for your wheel fairing, such as stainless steel polish or fastening material, can be found in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Chrome steel (colloquially known as stainless steel) |
| Surface | polished |
| Color | Chrome |
| Wheel size | 17 " |
| Folding the ends | closed folded, not folded |
| Shape of the mudguard | partly round |
| Total length over ends | 623 mm |
| Scope | 1006 mm |
| Wide mudguard profile | 80 mm |
| Height of mudguard profile | 35 mm |
| Total height from support surface to top edge | 325 mm |
| Mounting type | Nuts & bolts |
Accessories & related products
Inox
Hot 
GPO license plate holder Inox (CH version)
Width: 105 mm · Height: 5.3 mm · Manufacturer: GPO · Thread length: 8 mm · Material: Chrome steel (colloquially known as stainless steel) · Thread type: M5x0.8 (standard thread) · Hole spacing: 30 mm · Hole spacing: 50 mm · Color: silver · Total length: 145 mm · Ø mounting hole: 5 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 13.40
swiing® revival 17" front fender "Retro" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Wheel size: 17 " · Folding the ends: closed folded · Shape of the mudguard: round · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm · Mounting type: Nuts & bolts
EUR 73.40
Mudguard strut 17" chrome
Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Color: Chrome · Wheel size: 17 " · Total length: 325 mm · Distance mudguard - center hole: 315 mm · Mounting type: Nuts & bolts · Number of fixing points: 5 pcs · Hole spacing: 19 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 10.8 mm · Wide intake: 65 mm
EUR 15.80
Mudguard strut 16" chrome
Manufacturer: Made in Italy · Material: Steel · Surface: galvanized (blue) · Wheel size: 16 " · Total length: 305 mm · Distance mudguard - center hole: 290 mm · Mounting type: Nuts & bolts · Number of fixing points: 5 pcs · Ø mounting hole: 5.5 mm · Ø mounting hole: 10.8 mm · Wide intake: 75 mm
EUR 21.90
GPO license plate holder Inox black (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Surface: varnished · Color: black-matt · Total length: 147 mm · Width: 105 mm · Height: 6 mm · Thread type: M5x0.8 (standard thread) · Mounting type: Nuts & bolts · Number of fixing points: 6 pcs · Ø mounting hole: 5 mm
EUR 15.80
Explore categories from Mudguard
Moped fans also bought
Inox
Hot
GPO license plate holder Inox (CH version)
Width: 105 mm · Height: 5.3 mm · Manufacturer: GPO · Thread length: 8 mm · Material: Chrome steel (colloquially known as stainless steel) · Thread type: M5x0.8 (standard thread) · Hole spacing: 30 mm · Hole spacing: 50 mm · Color: silver · Total length: 145 mm · Ø mounting hole: 5 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 13.40
Magura Gas/Deco Cable Clamp, Ø 5 x 6 mm
Ø Cable bushing: 1.6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Screw head: Lens head · Ø outside: 5 mm · Drive: Slot · Thread length: 4 mm
EUR 2.45
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
EUR 14.10
EUR 31.33/l
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Chain pitch: 1/2" x 3/16" · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø bore: 4.05 mm · Ø Pin: 4 mm
EUR 23.20
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Cable length: 2250 mm · Number of components: 1 pcs · Area of application: Standard · Piaggio OEM number: 270460
EUR 2.95
Cable sleeve, Ø 5 x 2.2 mm, black (6-meter roll)
Ø cable: 2.2 mm · Ø outside: 5 mm · Total length: 6000 mm · Coating: none · Manufacturer: Made in Italy · Ordering unit: Roll 6 meter · Material: Plastic · Material: Steel · Ø inside: 2.5 mm · Color: black · Area of application: Standard
EUR 14.60
EUR 2.43/m
Hot
Manual indoor cable set
Manufacturer: Made in Germany · Material: Steel · Ø Stranded wire: 1.2 mm · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Quantity: 4 pcs · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 2200 mm
EUR 12.10
ESJOT Gear Ring, 37 Teeth, Reverse, Galvanized
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Color: silver · Ø inside: 94 mm · Number of teeth: 37 pcs · Ø bolt circle: 105.5 mm · Thickness: 4.1 mm · Ø mounting hole: 6.5 mm · Hole spacing: 74 mm · Number of fixing points: 4 pcs
EUR 58.70
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Width: 68 mm · Camouflaged: No · Material: Plastic · Color: black · Filter type: Racing screen · Total length: 165 mm · Area of application: Tuning · Ø Internal connection: 20 mm · Height: 52 mm · Mounting type: Plug connection clamped
EUR 73.40
swiing® revival 17" front fender "Retro" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Wheel size: 17 " · Folding the ends: closed folded · Shape of the mudguard: round · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm · Mounting type: Nuts & bolts
EUR 73.40
Working late? Evening hours on Thursday until 20:00
