Special front wheel conversion kit with industrial bearings and a complete wheel axle, designed to fit the front cast wheel on your Piaggio Si moped.
The benefits of this conversion kit include improved stability, reduced vibration, and longer bearing life.
The set consists of the front wheel bearing kit with two 6002 RS ball bearings from SKF, the world’s leading ball bearing manufacturer, an aluminum spacer tube, and the complete axle set from the quality brand swiing® ingenious.
The front plug-in axle includes all necessary washers, nuts, and spacer sleeves. The two nuts on the speedometer drive side are already pre-assembled. This ensures the necessary clearance is provided, eliminating the need for time-consuming spacing adjustments.
The colored markings show you where to install each part:
- red mark: hub (not visible in the picture)
- green mark: brake anchor plate
- yellow mark: Spacer for the speedometer drive (this spacer is not needed if a drive is installed)
- blue mark: fork legs
When you purchase this complete set, you’ll save a significant percentage off the retail price of the individual parts.
You can find the matching thru-axle as well as an alternative with bearing cones in the accessories section.
A sophisticated product from the premium brand swiing® that meets the highest standards.
Manufacturer: swiing® ingenious parts, SKF · Material: Aluminum, Steel · Ø outside: 20 mm, 14.9 mm, 32 mm · Ø inside: 11.25 mm, 15 mm · Total length: 53.5 mm · Width: 9 mm · Ball bearing closed: Yes
Manufacturer: swiing® ingenious parts · Material: Steel, Chrome steel (colloquially known as stainless steel) · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 160 mm
| Manufacturer | swiing® ingenious parts |
| Ball bearing closed | Yes |
| Material | Steel, Chrome steel (colloquially known as stainless steel), Aluminum |
| Surface | galvanized (blue), anodized |
| Ø shaft | 11 mm |
| Total length | 160 mm |
| Thread type | MF11x1 (fine pitch thread) |
| Piaggio | Si |
Accessories & related products
Hot 
swiing® ingenious bearing conversion kit cast front wheel | Piaggio Ciao, SI, Bravo, Grillo
Manufacturer: SKF · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Total length: 53.5 mm · Width: 9 mm · Ø inside: 11.25 mm · Ø inside: 15 mm · Ø outside: 14.9 mm · Ø outside: 20 mm · Ø outside: 32 mm · Ball bearing closed: Yes
EUR 36.20
swiing® revival wheel axle set front wheel | Piaggio SI
Ball bearing closed: No · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Ø shaft: 11 mm · Total length: 160 mm · Shank length: 30 mm · Thread length: 65 mm
EUR 45.20
GPO speedometer drive 16" with bracket axle 11 mm (for VDO speedometer cable)
Ø mounting hole: 11 mm · Manufacturer: GPO · Material: Aluminum · Thread type: MF10x1 (fine pitch thread) · Wheel size: 16 " · Ø axle: 11 mm · 4-edge speedometer cable: 1.8 mm · 4-edge speedometer cable: 2.6 mm · Ø outside: 41 mm · Place of use: left · Place of use: right · Total height: 10 mm
EUR 30.50
swiing® ingenious wheel axle for bearing conversion kit front wheel | Piaggio SI
Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 160 mm
EUR 48.90
Explore categories from Hub & axle
Moped fans also bought
FRABEL Vertical Fuel Valve M12x1 (with union nut), right-hand outlet | Piaggio SI
Manufacturer: FRABEL · Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Plastic · Filter type: Plastic net · Mounting type: Union nut · Installation direction: vertical / vertical · Outlet direction: right · Spare tube shape: straight · Ø fuel hose connection: 6 mm · Reserve level: 65 mm
EUR 15.30
Hot
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Germany · Material: Steel · Color: black · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Quantity: 4 pcs · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears
EUR 24.40
Hot
swiing® ingenious bearing conversion kit cast front wheel | Piaggio Ciao, SI, Bravo, Grillo
Manufacturer: SKF · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Total length: 53.5 mm · Width: 9 mm · Ø inside: 11.25 mm · Ø inside: 15 mm · Ø outside: 14.9 mm · Ø outside: 20 mm · Ø outside: 32 mm · Ball bearing closed: Yes
EUR 36.20
swiing® ingenious wheel axle for bearing conversion kit front wheel | Piaggio SI
Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 160 mm
EUR 48.90
Working late? Evening hours on Thursday until 20:00
