Hot 
World-class racing exhaust for your Puch Maxi S & N moped / moped with E50 engine and correspondingly large racing cylinder with exhaust outlet.
This is a thoroughbred racing muffler with an impressive resonance kick that delivers brute power directly to the rear wheel. The resonance pot dominates over the entire power band, pulls powerfully and showed noticeably more energy in endurance tests compared to comparable alternatives.
The racing wing is handmade from 0.8 mm thick material and leaves nothing to be desired in terms of performance, quality and accuracy of fit. The 3-point mounting of the muffler with additional reinforcement ensures stability and significantly reduces the risk of fatigue fracture. With a protective coating applied at the factory, the racing pot is ready for immediate installation.
| Puch | E50 |
Accessories & related products
Parmakit 47 mm cylinder kit without head | Puch
Nominal diameter: 47 mm · Manufacturer: Parmakit · Material: Aluminum · Area of application: Tuning · Displacement: 75 ccm · Surface: sandblasted · Crankshaft stroke: 43 mm · Ø cylinder neck: 49.5 mm · Ø outlet inside: 28 mm · Number of fixing points: 4 pcs · Inlet window: 29 x 16 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 46 mm · Decompressor: No · Ø piston pin (B): 12 mm · Outlet type: slanted · Hole spacing outlet: 45 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: No
EUR 379.90
HK Clutch "Racing" Kickstarter Aramid | Puch E50
Manufacturer: HK Clutches · Ø inside: 13.6 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Area of application: Racing · Material: Steel · Material addition: Aluminum · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 20.3 mm
EUR 367.60
Gilardoni italkit 47 mm Cylinder Kit (without head) | Puch E50 / Z50 / ZA50
Nominal diameter: 47 mm · Manufacturer: Gilardoni italkit · Material: Aluminum · Area of application: Tuning · Displacement: 75 ccm · Surface: sandblasted · Crankshaft stroke: 43 mm · Ø cylinder neck: 51 mm · Ø outlet inside: 26.5 mm · Ø Inlet inside: 18.3 mm · Number of fixing points: 4 pcs · Inlet window: 38.5 x 25.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 35.5 mm · Hole spacing inlet: 60 mm · Decompressor: No · Ø piston pin (B): 12 mm · Outlet type: slanted · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: No
EUR 257.30
Not in stock
PVL internal rotor ignition clockwise without keyway
Manufacturer: PVL · Material: Aluminum · Direction of rotation: right · Ø mounting plate: 90 mm · Mounting type: Screws · Number of fixing points: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 306.30
Hot
swiing® ingenious EVO ignition | Puch E50, Z50
Manufacturer: swiing® ingenious parts · Ø Internal flywheel: 63.5 mm · Light coil voltage: 12 V · Direction of rotation: any · Ø mounting plate: 90 mm · Tension: 12 V · Ø Flywheel outside: 75 mm · Number of fixing points: 3 pcs · Performance: 60 W · Mounting type: Screws · Area of application: High End · Area of application: Racing · Area of application: Tuning
EUR 330.80
Polini CP 23 mm carburetor (hand choke)
Nominal diameter: 23 mm · Manufacturer: Polini · Material: Aluminum · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: CP · Nozzle size: 110 · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Total length: 71.3 mm · Ø Inside entrance: 23 mm · Width: 66 mm · Ø Output inside: 23 mm · Height: 136 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 46 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Size of secondary nozzle: 40
EUR 183.70
Explore categories from Exhaust system
Moped fans also bought
VOCA silencer black with 3-point mount
Ø inside: 20.3 mm · Manufacturer: VOCA · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Surface: anodized · Color: black · Ø Silencer: 60.8 mm · Ø bolt circle: 46 mm · Number of fixing points: 3 pcs · Total length: 220 mm · Total length: 235 mm
EUR 110.20
VOCA silencer red with 3-point mount
Manufacturer: VOCA · Ø inside: 20.3 mm · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Color: black · Color: red · Surface: anodized · Ø bolt circle: 46 mm · Ø Silencer: 60.8 mm · Total length: 220 mm · Number of fixing points: 3 pcs · Thread type: M6x1 (standard thread)
EUR 110.20
Working late? Evening hours on Thursday until 20:00
