High-quality 0.15 mm diaphragm made of spring steel for your moped, moped and small motorcycle with Sachs 50/2 (502), 50/3 and 50/4 engine, which is operated in combination with the swiing® ingenious diaphragm insert.
A steel diaphragm is characterized by a high ductility, which means that it can bend or deform to a certain degree without breaking. This makes it particularly resistant to shocks and sudden loads, which is an advantage in engine operation with frequent load changes. In addition, a steel diaphragm is less susceptible to mechanical wear, which extends its service life. The advantage of carbon, on the other hand, is its lower weight, which leads to faster responsiveness and lower mass inertia, allowing higher efficiency and speed to be achieved.
| Manufacturer | swiing® ingenious parts |
| Membrane material | Spring steel |
| Thick membrane platelets | 0.15 mm |
| Total length | 53 mm |
| Width | 17 mm |
| Number of fixing points | 1 pcs |
| Sachs | 50/2 - ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 |
Ratings
Accessories & related products
Hot 
swiing® ingenious intermediate flange 17 mm diaphragm | Sachs 502, 50/2, 50/3, 50/4
Number of fixing points: 4 pcs · Ø inside: 17 mm · Manufacturer: swiing® ingenious parts · Total length: 29 mm · Width: 80 mm · Thickness: 6.9 mm · Material: Aluminum · Material: Steel · Area of application: Tuning · Surface: anodized · Surface: galvanized (blue) · Number of flaps: 2 pcs · Mounting type: Screws · Thread type: M5x0.8 (standard thread) · Hole spacing: 31 mm · Hole spacing: 67 mm
EUR 61.60
swiing® revival carburetor 17 mm Bing SSB 1/17/69
Manufacturer: swiing® revival parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SSB · Nominal diameter: 17 mm · Choke control: without choke · Width: 85 mm · Ø fuel hose connection: 6 mm · Height: 100 mm · Total length: 132 mm · Nozzle size: 76 · Mounting type: Flange · Hole spacing inlet: 31 mm · Mixed oil connection: No · Vacuum connection: No · Area of application: Standard · Area of application: Tuning · Camouflaged: No
EUR 156.60
EUR 140.60
Screw M3x5 half round head hexagon socket black
Material: Steel · Surface: blackened · Number of components: 1 pcs · Color: black · Total length: 5.65 mm · Screw head: Lens head · Ø External head: 5.5 mm · Drive: Hexagon socket · Thread type: M3x0.5 (standard thread) · Thread length: 5 mm · Strength class: 10.9
EUR 0.75
Not in stock
swiing® ingenious diaphragm insert (steel or carbon) | Sachs 50/2, 50/3, 50/4
Manufacturer: swiing® ingenious parts · Material: Brass · Number of flaps: 2 pcs · Total length: 80.6 mm · Width: 27 mm · Hole spacing: 67 mm · Area of application: Racing · Area of application: Tuning · Alternative version of the Sachs OEM number: A2624
EUR 67.80
Moped fans also bought
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
EUR 12.20
EUR 27.11/l
swiing® revival stud bolt M5 x 23 inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)
Material: Steel · Total length: 23 mm · Manufacturer: swiing® revival parts · Surface: galvanized (blue) · Diameter: 4.9 mm · Thread length: 6 mm · Thread length: 12 mm · Thread type: M5x0.8 (standard thread) · Area of application: Standard · Pony OEM number: A3700 · Sachs OEM no.: 0640 016 101 · Sachs OEM no.: 0640 016 102
EUR 2.25
swiing® ingenious intermediate flange 13 mm diaphragm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Standard · Area of application: Tuning · Surface: anodized · Number of flaps: 2 pcs · Ø inside: 13 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Thread type: M5x0.8 (standard thread) · Hole spacing: 31 mm · Hole spacing: 67 mm
EUR 73.90
Screw M3x5 half round head hexagon socket black
Material: Steel · Surface: blackened · Number of components: 1 pcs · Color: black · Total length: 5.65 mm · Screw head: Lens head · Ø External head: 5.5 mm · Drive: Hexagon socket · Thread type: M3x0.5 (standard thread) · Thread length: 5 mm · Strength class: 10.9
EUR 0.75
Not in stock
swiing® ingenious diaphragm insert (steel or carbon) | Sachs 50/2, 50/3, 50/4
Manufacturer: swiing® ingenious parts · Material: Brass · Number of flaps: 2 pcs · Total length: 80.6 mm · Width: 27 mm · Hole spacing: 67 mm · Area of application: Racing · Area of application: Tuning · Alternative version of the Sachs OEM number: A2624
EUR 67.80
Collection only possible with online purchase and appointment.
