High-quality flange gasket consisting of 2 oil paper gaskets and a spacer made of temperature-resistant plastic, suitable for the 15 mm intake manifold of your Puch Velux X30 moped / moped with Z50 engine.
The seal also fits Sachs 502, 50/2 and 503 engines. The inner diameter of the inlet gasket is compatible with original 503 cylinders with a seal, as well as with racing cylinders with a 15 mm inlet diameter.
The 4 mm special gasket with round inlet prevents excessive heating of the intake tract, which could have a negative effect on the air-fuel mixture. Excessively high temperatures in the intake tract can reduce the air density and thus reduce the efficiency of the combustion process.
The intake gasket can also be used if the carburettor needs to be raised.
You can find the matching intake manifold and carburetor in the accessories section.
Exclusive product for the highest demands of the quality brand swiing®.
| Nominal diameter | 15 mm |
| Manufacturer | swiing® ingenious parts |
| Material | Oiled paper, Phenolic resin (colloquially known as Bakelite) |
| Ø inside | 15 mm |
| Thickness | 4 mm |
| Hole spacing inlet | 32 mm |
| Puch | Z50 (X30 Velux) |
| Sachs | 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) 503 |
Accessories & related products
swiing® ingenious 15 mm carburetor set camouflaged | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Air filter connection: 23 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 62 · Mounting type: Flange · Mounting type: Plug connection clamped · Hole spacing inlet: 32 mm · Area of application: Tuning
EUR 150.60
Explore categories from Carburetor & intake system
Moped fans also bought
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm · Number of components: 1 pcs
EUR 2.95
BING O-ring Bing SRE & 85, Ø 20 mm
Place of use: Carburetor · Ø inside: 17.2 mm · Ø outside: 20 mm · Cord thickness: 1.4 mm · Color: black · Manufacturer: BING · Number of components: 1 pcs · Material: Rubber · Surface: raw · Area of application: Standard · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
EUR 3.55
GPO gasket set carburetor Bing SRE
Manufacturer: GPO · Camouflaged: No · Component group Carburetor: Sealing, revising · Material: Sealing paper · Carburetor type: SRE · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm · Ø inside: 7.8 mm · Ø inside: 41 mm · Ø outside: 12.2 mm · Ø outside: 45 mm
EUR 6.00
Hot
swiing® ingenious 15 mm carburetor camouflaged | Sachs 503
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Material: Aluminum · Area of application: Tuning · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Width: 50 mm · Vacuum connection: No · Total length: 66 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Height: 95 mm
EUR 97.90
swiing® ingenious 15 mm intake manifold long version | Sachs 503 2AL, 2BL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Hole spacing inlet: 32 mm · Ø External connection: 20 mm · Total length: 70 mm · Thread type: M6x1 (standard thread) · Ø inside: 15 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Total height: 80 mm · Height flange center hole: 70 mm · Camouflaged: No · Pony OEM number: A2176
EUR 73.40
swiing® ingenious 15 mm intake manifold short version | Sachs 503 2AL, 2BL
Total length: 50 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Thread type: M6x1 (standard thread) · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Ø inside: 15 mm · Hole spacing inlet: 32 mm · Area of application: Tuning · Alternative version of the Pony OEM number: A2177
EUR 61.20
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
