39 mm cylinder head with M12x1.5 mm decompressor bore to fit the 39 mm swiing original and tuning cylinder kit for Zündapp Belmondo mopeds, Zündapp Bergsteiger M25/M50 mopeds, as well as Alpa Spezial 3000 and Alpa Black River small motorcycles. Alpa Black River small motorcycles that have a Zündapp type 247 engine installed.
Top workmanship and highest fitting accuracy.
The shoulder on the flat surface ensures that the cylinder head is perfectly centered on the cylinder.
Pay attention: If you install this cylinder head on an original Zündapp cylinder, it must be raised by 1.5 mm to prevent the piston from touching the cylinder head.
You will find the matching cylinder kit in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Ø cylinder | 39 mm |
| Number of fixing points | 4 pcs |
| Decompressor | MF12x1.5 |
Suitable for the following models
| Zündapp Belmondo | |
| Zündapp | 247 Motor |
Accessories & related products
Loctite 638 High-strength adhesive 10 ml
Temperature resistance (min.): -75 - 150 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: green · Contents [ml]: 10 ml · Area of application: Chemistry · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: high-strength · Type of application: 1K · Gap dimension (max.): 0.25 mm · Alignment time: 300 sec · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m
EUR 26.80
EUR 2’680.00/l
swiing® ingenious piston 39 mm Vertex | Zündapp Belmondo Type 247
Manufacturer: swiing® ingenious parts · Nominal diameter: 39 mm · Ø outside piston (A): 38.95 mm · Compression height (C): 26.3 mm · Curvature (D): 1.5 mm · Total piston height (E): 51.5 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Oblique push · Piston ring height: 1.5 mm · Ø piston pin (B): 12 mm · Piston weight: 82 g
EUR 73.30
Moped fans like you also bought:
17 mm Bing SRF carburetor (replica)
Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRF · Nominal diameter: 17 mm · Ø Internal connection: 23 mm · Total length: 78 mm · Width: 64 mm · Ø Air filter connection: 60 mm · Ø Air filter connection: 64 mm · Height: 117 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M4x0.7 (standard thread) · Nozzle block: 2.xx · Mounting type: Plug connection clamped · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m · Area of application: Tuning
EUR 79.40
GPO gasket set 40 - 41 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Number of components: 4 pcs · Manufacturer: GPO · Ø cylinder: 40 mm · Ø cylinder: 41 mm · Ø outlet inside: 22 mm · Hole pattern [mm]: 44 x 44 mm · Hole spacing outlet: 42 mm · Decompressor: Yes · Hole spacing inlet: 38 mm · Area of application: Tuning
EUR 10.90
swiing® ingenious 39 mm cylinder kit original with head | Zündapp Belmondo (Type 247)
Nominal diameter: 39 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: No · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Surface: sandblasted · Ø cylinder neck: 48 mm · Ø Inlet inside: 9.2 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 40 mm · Ø piston pin (B): 18.5 mm · Outlet type: slanted · Hole spacing outlet: 40 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 42
EUR 275.10
Collection only possible with online purchase and appointment.
