
Drive for the speedometer head on the left-hand side to fit your Zündapp ZL25, ZS25, ZX25, ZD10, ZD20, ZD25, ZD30, ZD40, ZD50, ZE40, ZR10, ZR20, ZR22 or ZR30 moped / moped as well as CS50 moped / mokick with chassis 446, 447, 448, 460 and engine type 250, 278, 280 with 17 inch wheels.
The speedometer drive with cast aluminum housing is mounted on the left side of the front wheel and has two lugs for mounting and locking.
| Material | Aluminum |
| Wheel size | 17 " |
| Ø mounting hole | 12.1 mm |
| Ø outside | 47.5 mm |
| 4-edge speedometer cable | 1.8 mm |
| Ø axle | 12 mm |
| Total height | 18.5 mm |
| Nominal diameter (thread) | 12 mm |
| Thread type | MF10x1 (fine pitch thread) |
| Zündapp OEM number | 446-16.600 |
| Zündapp | ZR 10 / ZR 20 / ZR 22 / ZR 30 / ZB 22 (type 250-447) ZD 10 / ZD 30 (type 250-466) ZD 20 / ZD 25 / ZD 40 / ZD 50 (type 278-446) CS 25 / CS 25 Hai (Type 278-448) CS 50 / CS 50 Hai (type 280-448) ZA 25 / ZA 40 (type 250-460) ZL 25 / ZS 25 / ZX 25 / ZE 40 (type 278-460) |
Accessories & related products
VDO speedometer cable (38 - 100 cm) black (1A quality)
Manufacturer: VDO · Outer shell length: 380 mm · Outer shell length: 450 mm · Outer shell length: 500 mm · Outer shell length: 550 mm · Outer shell length: 600 mm · Outer shell length: 650 mm · Outer shell length: 680 mm · Outer shell length: 700 mm · Outer shell length: 750 mm · Outer shell length: 800 mm · Outer shell length: 850 mm · Outer shell length: 900 mm · Outer shell length: 950 mm · Outer shell length: 1000 mm · Thread type: MF10x1 (fine pitch thread) · 4-edge speedometer cable: 1.8 mm · Color: black
EUR 13.40
Explore categories from Speedometer & drive
Moped fans also bought
Return spring brake plate | Puch Maxi
Spring design: Nose feather · Spring design: Torsion spring · Ø wire: 2.4 mm · Length spring hook: 50 mm · Leg length: 45 mm · Area of application: Original · Material: Spring steel · Area of application: Standard · Surface: galvanized (blue) · Total length: 125 mm · Ø inside: 25.5 mm · Ø outside: 30 mm
EUR 6.00
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
EUR 13.40
EUR 29.78/l
swiing® revival wheel axle LELEU & Grimeca wheel hub cast wheel rear | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.9 mm · Total length: 185 mm · Thread length: 26 mm · Thread length: 52.5 mm · Ø outside: 11.8 mm · Shank length: 100 mm · Width across flats: 19 mm
EUR 18.30
Karcoma fuel filter 24 mm plastic / paper
Manufacturer: Karcoma · Material: Paper · Material: Plastic · Filter type: Filter paper · demountable: No · Color: transparent · Color: yellow · Total length: 35 mm · Total length: 60 mm · Ø inside: 4.7 mm · Ø outside: 24 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7.3 mm
EUR 16.60
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Color: blue · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.90
EUR 2’690.00/l







