Original shock absorber for various mopeds and small motorcycles. Characteristic classic with short spiral springs made of chrome-plated steel and the white bars. The damper rod inside the shock absorber is protected by a plastic cover.
Length (mount - mount): 310 mm
Ø outer: 55 mm
Ø spar: 32 mm
Ø Büchsen zur Bef.: 8 mm
The scope of delivery corresponds to one pair.
NOS – New from old stock.
| Color | Chrome, white |
| Material | Steel, Cast aluminum |
| Surface | chrome-plated, varnished |
| Damping type | Spring |
| Adjustable | No |
| Ø outside | 55 mm |
| Ø Fastening inside | 8 mm |
| Number of fixing points | 2 pcs |
| Mounting type | Nuts & bolts |
| Ø spars | 32 mm |
| Hole spacing | 310 mm |
Ratings
Accessories & related products
IMCA shock absorber 30 cm black
Color: black · Manufacturer: IMCA · Material: Steel · Surface: varnished · Damping type: Spring · Adjustable: Yes · Ø outside: 45 mm · Ø Fastening inside: 10 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø spars: 28 mm · Hole spacing: 300 mm
EUR 62.80
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Color: blue · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 27.00
EUR 2’700.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Color: black · Manufacturer: YSS · Material: Steel · Surface: varnished · Damping type: Hydraulic (oil) · Adjustable: Yes · Ø outside: 52 mm · Ø Fastening inside: 10 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø spars: 32 mm · Hole spacing: 330 mm
EUR 172.70
IMCA shock absorber 30 cm chrome / black
Color: Chrome · Color: black · Manufacturer: IMCA · Material: Steel · Surface: chrome-plated · Surface: varnished · Damping type: Spring · Adjustable: Yes · Ø outside: 45 mm · Ø Fastening inside: 10 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø spars: 28 mm · Hole spacing: 300 mm
EUR 73.90
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Screw head: Hexagon · Drive: External hexagon · Thread type: M8x1.25 (standard thread) · Number of components: 17 pcs
EUR 22.10
Explore categories from Shock absorber & swingarm
Moped fans also bought
Hot 
BERU spark plug connector / 1 kΩ interference suppressed
Color: silver · Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.90
Oil seal NBR 17/33/7 B DUO crankshaft | Sachs 503 AB, ADV
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: B DUO - With sheet metal outer casing / two sealing lips. · Ø inside: 17 mm · Manufacturer: Sachs · Place of use: Crankshaft · Material: NBR · Ø outside: 33 mm · Width: 7 mm
EUR 11.00
NSK 6201 ball bearing 12/32/10
Bearing cage: Sheet steel cage ball-guided · Inner ring width: 10 mm · Ø inside: 12 mm · Manufacturer: NSK · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Material: Steel · Surface: blank · Stock number: 6201 · Bearing type: Shoulder bearing · Ø outside: 32 mm · Area of application: Standard · Ball bearing closed: No · Width: 10 mm
EUR 10.50
Shaft seal NBR 14.96x31.5x3.5 Pinion shaft | Sachs 502, 50/2, 503 (A1134)
Temperature resistance (min.): -30 - 100 °C · Ø inside: 14.96 mm · Manufacturer: Sachs · Material: NBR · Place of use: Pinion shaft · Surface: coated · Ø outside: 31.5 mm · Area of application: Standard · Width: 3.5 mm · Pony OEM number: A1134 · Sachs OEM no.: 0230 011 100 · Sachs OEM no.: 0230 011 200
EUR 9.25
Oil seal NBR 15/30/7 B DUO | Sachs 50/2 / 503 (A1830)
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: B DUO - With sheet metal outer casing / two sealing lips. · Ø inside: 15 mm · Manufacturer: Sachs · Material: NBR · Ø outside: 30 mm · Width: 7 mm · Pony OEM number: A1830 · Sachs OEM no.: 0250 090 000
EUR 6.70
Collection only possible with online purchase and appointment.
