Black, adjustable shock absorbers with pink coil springs for your moped, moped and small motorcycle.
The hardness or preload of the shock absorbers can be adjusted using the special spring mount.
Length (mount - mount): 300 mm
Outer diameter of coil spring: 50 mm
Holt diameter: 30 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
| Color | pink, black |
| Surface | varnished |
| Damping type | Spring |
| Ø outside | 50 mm |
| Adjustable | Yes |
| Total length | 330 mm |
| Ø spars | 30 mm |
| Mounting type | Nuts & bolts |
| Number of fixing points | 2 pcs |
| Ø Fastening inside | 10 mm |
| Hole spacing | 300 mm |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.90
EUR 2’690.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Color: black · Surface: varnished · Damping type: Hydraulic (oil) · Adjustable: Yes · Ø outside: 52 mm · Mounting type: Nuts & bolts · Ø spars: 32 mm · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm · Hole spacing: 330 mm · Total length: 335 mm
EUR 171.50
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Number of components: 17 pcs · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Screw head: Hexagon
EUR 21.90
MKX shock absorber 30 cm chrome
Ø outside: 46 mm · Manufacturer: MKX · Material: Aluminum · Material: Steel · Surface: chrome-plated · Color: Chrome · Damping type: Spring · Adjustable: Yes · Number of fixing points: 2 pcs · Total length: 335 mm · Ø spars: 24 mm · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Hole spacing: 300 mm · Mounting type: Nuts & bolts
EUR 61.20
Explore categories from Shock absorber & swingarm
Moped fans also bought
Inox
Hot 
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Thread type: M5x0.8 (standard thread) · Color: silver · Number of fixing points: 2 pcs · Total length: 145 mm · Width: 105 mm · Height: 5.3 mm · Ø mounting hole: 5 mm · Thread length: 8 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Mounting type: Nuts & bolts
EUR 13.40
Hot
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Ø cable: 5 mm · Ø cable: 7 mm · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.80
GPO 15 mm carburetor tuning | Puch
Nominal diameter: 15 mm · Manufacturer: GPO · Camouflaged: No · Area of application: Tuning · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Total length: 66 mm · Ø Internal connection: 20 mm · Width: 50 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m
EUR 79.60
Not so nice 
15 mm intake manifold | Puch E50
Material: Aluminum · Camouflaged: Yes · Ø inside: 14.5 mm · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Total height: 54 mm · Height flange center hole: 43 mm · Total length: 47 mm · Area of application: Tuning
EUR 14.60
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Material: Plastic · Material: Steel · Color: black · Surface: galvanized (blue) · Color: silver · Number of teeth: 10 pcs · Ø outside sprocket: 36 mm · Number of fixing points: 1 pcs · Thread type: M6x1 (standard thread) · Total length: 175 mm
EUR 12.10
EUR 10.90
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
