Description

Complete dabber rod without lever, which was installed on certain 3- and 4-speed Sachs 50 engines.

The cold start lever is mounted on the fan cowl. The dabber on the carburetor is actuated by means of the flat on the rod.

Total length: 15 cm

Details

Material	Steel
Component group Carburetor	Adjusting screws, float, etc.
Carburetor type	SSB
Total length	150 mm

Suitable for the following models

Sachs

50/3

50/4 - MLFB (2.6 PS) , LKH (4.5 PS)

Ratings

Explore categories from Carburetor

Bing / swiing®

Dell'Orto

Stage6

Polini

Keihin

Mikuni

Solex

Gurtner

Other

Moped fans also bought

GPO exhaust manifold 32 mm | Sachs 50/2, 50/3

For: Sachs

11699

GPO exhaust manifold 32 mm | Sachs 50/2, 50/3

Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 255 mm · Ø inside: 29.6 mm · Ø External connection: 38 mm · Ø outside: 32.2 mm · Mounting type: Union nut

EUR 34.20

Rubber grommet round 2 cables | Sachs 502, 503, 504, 505, 535, 508 (A1923)

For: Sachs · Hercules

12023

Rubber grommet round 2 cables | Sachs 502, 503, 504, 505, 535, 508 (A1923)

Total length: 7 mm · Ø outside: 12.8 mm · Material: Rubber · Color: black · Ø Cable bushing: 2.2 mm · Ø mounting hole: 8.5 mm · Ø Bundle: 10.5 mm · Waistband height: 2 mm · Pony OEM number: A1923 · Sachs OEM no.: 0260 020 000

EUR 6.00

swiing® revival exhaust nut M40x1.5 galvanized (for 32 mm pipe) | Sachs

For: Sachs

12140

swiing® revival exhaust nut M40x1.5 galvanized (for 32 mm pipe) | Sachs

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF40x1.5 (fine pitch thread) · Nut type: Union nut · Ø inside: 33.5 mm · Ø outside: 46 mm · Height: 19 mm · Nominal diameter (thread): 40 mm

EUR 17.00

For: Sachs

17132

Swab lever Sachs 50/3 & 50/4

Material: Aluminum · Component group Carburetor: Adjusting screws, float, etc. · Carburetor type: SSB

EUR 14.60

Torsion spring for dabber Sachs 50/3 & 50/4

For: Sachs

17155

Torsion spring for dabber Sachs 50/3 & 50/4

Spring design: Torsion spring

EUR 7.25

Adjusting screw M10x1 clutch | Sachs 50/3 & 50/4

For: Sachs

17302

Adjusting screw M10x1 clutch | Sachs 50/3 & 50/4

Thread type: M5x0.8 (standard thread) · Thread type: MF10x1 (fine pitch thread) · Material: Steel · Surface: galvanized (blue) · Total length: 11 mm · Slotted: Yes · Width across flats Screw: 11 mm · Thread length: 6 mm · Sachs OEM no.: 0240 111 005

EUR 9.70

swiing® revival nozzle set (58 - 68) Bing SSB | Sachs 502, 50/2, 50/3, 50/4

For: Sachs

19861

swiing® revival nozzle set (58 - 68) Bing SSB | Sachs 502, 50/2, 50/3, 50/4

Drive: External hexagon · Width across flats: 8 mm · Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SSB · Nozzle type: Main nozzle · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68

EUR 46.50

swiing® revival nozzle set (70 - 80) Bing SSB | Sachs 502, 50/2, 50/3, 50/4

For: Sachs

19862

swiing® revival nozzle set (70 - 80) Bing SSB | Sachs 502, 50/2, 50/3, 50/4

Manufacturer: swiing® revival parts · Material: Brass · Quantity: 6 pcs · Component group Carburetor: Spraying · Carburetor type: SSB · Nozzle type: Main nozzle · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74 · Nozzle size: 76 · Nozzle size: 78 · Nozzle size: 80 · Drive: External hexagon · Width across flats: 8 mm

EUR 46.50