High-quality 21 mm CP carburetor kit with clamp connection for your moped, moped and small motorcycle.
The set was designed by Polini for the Puch Maxi S, N moped / moped models with E50 engine, but can also be used universally for countless other makes and models.
During the development of the CP models, special emphasis was placed on size and weight, making this carburetor particularly compact and around 40% lighter than conventional carburetors.
Due to the compact design, the intake path is very short. Unique is the concentric design of the passage, i.e. a circular passage instead of an oval one as with most other carburettors - a geometry that optimizes the air flow. Modifications to the mixing tube and the use of a larger needle ensure better atomization of the gas mixture.
This should simplify the tuning of the carburetor and enable high performance with low consumption. In addition, all CP carburetors have an oil and vacuum connection.
| Nominal diameter | 21 mm |
| Material | Aluminum |
| Manufacturer | Polini |
| Component group Carburetor | Carburetor complete |
| Carburetor type | CP |
| Choke control | Cable choke |
| Ø fuel hose connection | 6 mm |
| Nozzle thread | M5x0.8 (standard thread) |
| Ø without reducing sleeve | 25 mm |
| Nozzle size | 100 |
| Mounting type | Plug connection |
| Ø Internal connection | 24 mm |
| Ø Air filter connection | 46 mm |
| Area of application | Tuning |
| Mixed oil connection | Yes |
| Vacuum connection | Yes |
| Size of secondary nozzle | 40 |
| Puch |
Ratings
Accessories & related products
Polini 24 mm carburetor (hand choke)
Carburetor type: Flat slide valve · Nominal diameter: 24 mm · Manufacturer: Polini · Component group Carburetor: Carburetor complete · Mounting type: Plug connection · Ø Air filter connection: 49 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Area of application: Tuning · Nozzle thread: M5x0.8 (standard thread)
EUR 185.00
Polini jet set (120 - 138) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 120 · Nozzle size: 122 · Nozzle size: 124 · Nozzle size: 126 · Nozzle size: 128 · Nozzle size: 130 · Nozzle size: 132 · Nozzle size: 134 · Nozzle size: 136 · Nozzle size: 138
EUR 49.20
Polini jet set (140 - 158) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 140 · Nozzle size: 142 · Nozzle size: 144 · Nozzle size: 146 · Nozzle size: 148 · Nozzle size: 150 · Nozzle size: 152 · Nozzle size: 154 · Nozzle size: 156 · Nozzle size: 158
EUR 49.20
Polini 26 mm carburetor (hand choke)
Manufacturer: Polini · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: Flat slide valve · Nominal diameter: 26 mm · Ø Inside entrance: 26 mm · Ø Output inside: 26 mm · Ø Air filter connection: 49 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 105 · Size of secondary nozzle: 45 · Total length: 83 mm · Width: 65 mm · Height: 155 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 178.80
Polini 32 mm carburetor (hand choke)
Manufacturer: Polini · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: Flat slide valve · Nominal diameter: 32 mm · Ø Inside entrance: 32 mm · Ø Output inside: 32 mm · Ø Air filter connection: 55 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 122 · Size of secondary nozzle: 42 · Total length: 83 mm · Width: 78 mm · Height: 155 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 234.40
Polini racing exhaust "for race" blanco | Puch Maxi, X30
Manufacturer: Polini · Material: Steel · Surface: blank · Total length: 900 mm · Ø Silencer: 60 mm · Exhaust type: Cone / double cone · Number of fixing points: 2 pcs · Flame tube attachment: Flange · Flame tube attachment: suspended
EUR 456.50
Moped fans also bought
GPO 45 mm cylinder kit 70 ccm | Puch
Nominal diameter: 45 mm · Material: Aluminum · Number of fixing points: 4 pcs · Manufacturer: GPO · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 47.8 mm · Ø outlet inside: 24.6 mm · Inlet window: 21.8 x 14.6 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Area of application: Tuning · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No
EUR 123.30
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Material: Spring steel · Color: blue · Total length: 28 mm · Ø wire: 1.7 mm · Ø inside: 4.8 mm · Manufacturer: swiing® ingenious parts · Ø outside: 8.3 mm · Number of components: 3 pcs · Surface: coated · Area of application: Tuning
EUR 22.10
swiing® revival nozzle set M3.5 (44 - 54) Bing SRE, SRA, SRC, SRF
Material: Brass · Total length: 6 mm · Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Quantity: 6 pcs · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 44 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 54
EUR 19.60
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Material: Aluminum · Total length: 135 mm · Height: 55 mm · Number of fixing points: 4 pcs · Manufacturer: GPO · Surface: sandblasted · Ø cylinder: 45 mm · Width: 125 mm · Candle thread: short · Area of application: Tuning · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes
EUR 40.60
Athena 45 mm cylinder kit 70 ccm camouflaged | Puch
Nominal diameter: 45 mm · Manufacturer: Athena · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 70 ccm · Ø cylinder neck: 48 mm · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Inlet window: 22.3 x 14 · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 23.5 mm · Hole pattern [mm]: 44 x 44 · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Decompressor: No
EUR 196.10
Polini jet set (120 - 138) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 120 · Nozzle size: 122 · Nozzle size: 124 · Nozzle size: 126 · Nozzle size: 128 · Nozzle size: 130 · Nozzle size: 132 · Nozzle size: 134 · Nozzle size: 136 · Nozzle size: 138
EUR 49.20
GPO 12 mm intake manifold Puch X30 NG-2AH
Ø inside: 12 mm · Total height: 63 mm · Manufacturer: GPO · Material: Aluminum · Camouflaged: No · Hole spacing inlet: 32 - 38 mm · Area of application: Original · Ø External connection: 20 mm · Total length: 53 mm · Number of fixing points: 2 pcs · Height flange center hole: 52.5 mm · Mounting type: Screws
EUR 49.20
swiing® ingenious clutch springs reinforced (+50%) | Puch E50
Spring design: Pressure spring · Ø wire: 2 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: red · Area of application: Tuning · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Total length: 26.6 mm · Number of components: 3 pcs
EUR 22.10
Collection only possible with online purchase and appointment.
