Polini has placed particular emphasis on size and weight in the development of the CP model; this carburetor is therefore particularly compact and around 40% lighter than traditional carburetors.
Due to the compact design, the intake path is very short. Unique is the concentric design of the passage, i.e. a circular passage instead of an oval one as with most other carburettors - a geometry that optimizes the air flow. Modifications to the mixing tube and the use of a larger needle ensure better atomization of the gas mixture.
This is intended to simplify the tuning of the carburetor and enable high performance with low consumption. All CP carburetors have an oil and vacuum connection.
Inlet connection diameter: 24 or 26 mm if the bushes are removed.
Connection diameter of air filter: 46 mm
Main nozzle size: 66
Side nozzle size: 42
Choke is located directly on the carburetor and must be operated by hand.
Special Polini nozzles must be used.
Quality product from the Italian manufacturer Polini.
| Nominal diameter | 19 mm |
| Width | 66 mm |
| Height | 135 mm |
| Manufacturer | Polini |
| Material | Aluminum |
| Area of application | Tuning, Racing, Performance, High End |
| Component group Carburetor | Carburetor complete |
| Carburetor type | CP |
| Ø without reducing sleeve | 26 mm |
| Ø Internal connection | 24 mm |
| Ø Inside entrance | 19 mm |
| Ø Output inside | 19 mm |
| Ø Air filter connection | 46 mm |
| Mounting type | Plug connection clamped |
| Ø fuel hose connection | 7 mm, 6 mm |
| Total length | 73.5 mm |
| Mixed oil connection | Yes |
| Vacuum connection | Yes |
| Choke control | Hand choke |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle block | 35-12 |
| Nozzle size | 66 |
| Camouflaged | No |
| Size of secondary nozzle | 42 |
Accessories & related products
Polini intake system 4-folding diaphragm "Big Valve" PHBG / CP carburetor | Puch
Manufacturer: Polini · Material: Aluminum · Material: Plastic · Surface: glass bead blasted · Number of flaps: 4 pcs · Membrane material: Carbonite · Ø outside: 24 mm · Ø inside: 28.6 mm · Thick membrane platelets: 0.3 mm · Ø mounting hole: 5.2 mm · Number of fixing points: 4 pcs · Mounting type: Screws · Thread type: M5x0.8 (standard thread) · Area of application: Racing · Area of application: Tuning · Camouflaged: No
EUR 171.50
Moped fans also bought
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Material: Steel · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Number of components: 1 pcs · Area of application: Standard
EUR 2.95
AKOA 21 mm intake manifold Dell'Orto PHBG plastic | Puch E50 / Z50 / ZA50 (wind cooled)
Material: Plastic · Color: black-matt · Manufacturer: AKOA · Number of fixing points: 2 pcs · Ø inside: 20.7 mm · Ø External connection: 26 mm · Hole spacing inlet: 38 mm · Mounting type: Screws · Area of application: Tuning
EUR 36.70
Intake manifold 46 / 47 mm cylinder | Puch
Number of fixing points: 2 pcs · Material: Aluminum · Ø inside: 19 mm · Ø External connection: 24 mm · Camouflaged: No · Hole spacing inlet: 38 mm · Mounting type: Screws · Total height: 75 mm · Height flange center hole: 65 mm · Total length: 60 mm · Area of application: Tuning
EUR 48.90
Polini jet set (80 - 98) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 84 · Nozzle size: 86 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98
EUR 48.90
Polini jet set (60 - 78) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74 · Nozzle size: 76 · Nozzle size: 78
EUR 48.90
Polini 43.5 mm cylinder kit reed valve with head | Puch
Nominal diameter: 43.5 mm · Manufacturer: Polini · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Crankshaft stroke: 43 mm · Displacement: 65 ccm · Ø cylinder neck: 48 mm · Ø outlet inside: 22 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Inlet window: 26 x 21 mm · Thread inlet: M5x0.8 (standard thread) · Hole pattern [mm]: 44 x 44 · Hole spacing inlet: 32 mm · Hole spacing inlet: 39 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Area of application: Racing · Area of application: Tuning · Camouflaged: No
EUR 490.20
Polini intake system 4-folding diaphragm "Big Valve" PHBG / CP carburetor | Puch
Manufacturer: Polini · Material: Aluminum · Material: Plastic · Surface: glass bead blasted · Number of flaps: 4 pcs · Membrane material: Carbonite · Ø outside: 24 mm · Ø inside: 28.6 mm · Thick membrane platelets: 0.3 mm · Ø mounting hole: 5.2 mm · Number of fixing points: 4 pcs · Mounting type: Screws · Thread type: M5x0.8 (standard thread) · Area of application: Racing · Area of application: Tuning · Camouflaged: No
EUR 171.50
Working late? Evening hours on Thursday until 20:00
