This aluminum cylinder, which is supplied with the matching cylinder head, is suitable for Piaggio Ciao, Bravo 1 and Boxer mopeds.
The 42 mm racing cylinder from Pinasco is one of the best cylinders for Piaggio currently available on the market. Perfect workmanship and detailed tuning characterize this 60 cc cylinder.
This racing cylinder has optimum power development in the high speed range due to its design and corresponding timing. As a result, it has slightly less torque at lower engine speeds.
The piston pin has a diameter of 12 mm.
Can be mounted on an original housing without any modifications.
In order to get the full performance out of this kit, we recommend installing an adapted engine housing. You can find this in the accessories section.
Quality product from the Italian manufacturer Pinasco.
| Nominal diameter | 42 mm |
| Manufacturer | Pinasco |
| Material | Aluminum |
| Surface | varnished |
| Displacement | 60 ccm |
| Crankshaft stroke | 43 mm |
| Ø cylinder neck | 45.7 mm |
| Ø Outlet outside | 22.5 mm |
| Ø outlet inside | 18.5 mm |
| Number of fixing points | 3 pcs |
| Hole pattern [mm] | 55 x 34 |
| Ø piston pin (B) | 12 mm |
| Decompressor | Yes |
| Outlet type | clamped |
| Area of application | Tuning |
| Piaggio | Ciao - P, SC, PX, C24 Bravo / Super Bravo Boxer |
Accessories & related products
Pinasco 46 mm cylinder kit incl. head 12 mm KoBo | Piaggio SI, Bravo, Grillo
Material: Aluminum · Manufacturer: Pinasco · Surface: sandblasted · Camouflaged: No · Area of application: Tuning · Crankshaft stroke: 43 mm · Displacement: 70 ccm · Ø piston pin (B): 12 mm · Nominal diameter: 46 mm · Number of fixing points: 3 pcs · Outlet type: clamped · Decompressor: Yes
EUR 366.10
Pinasco *Competition* crankshaft Piaggio Ciao, SI, Bravo, Boxer (12 mm)
Dimension needle bearing: 12 / 15 x 14.8 mm (axe 12) · Manufacturer: Pinasco · Cheek type: standard · Crankshaft stroke: 43 mm · Ø coupling pin / vario pin: 12 mm · Thread type: M8x1.25 (standard thread) · Connecting rod length center-center: 87 mm · Total length crankpin ignition side: 91.5 mm · Ø piston pin (B): 12 mm · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 15 mm · Area of application: Racing · Wide crank webs: 32.5 mm · Length 1st paragraph: 22.2 mm · Length 2nd paragraph: 43.4 mm · Length 3rd paragraph: 62 mm · Number of gears: 1 pcs
EUR 323.40
Not in stock
Pinasco flywheel "Flytech" Carbon | Piaggio Ciao, SI, Bravo, Boxer
Height: 38.7 mm · Manufacturer: Pinasco · Thread type: MF16x1 (fine pitch thread) · Material: Aluminum · Material: Carbon · Surface: varnished · Ø Internal flywheel: 106 mm · Direction of rotation: right · Ø cone small inside: 12.4 mm · Ø cone large inside: 14.5 mm · Cone length: 12.5 mm · Cone ratio: 1:5 · Weight: 650 g · Ø Flywheel outside: 135 mm · Thread length: 7.5 mm
EUR 256.20
Pinasco 42 mm cylinder kit incl. head 10 mm KoBo | Piaggio Ciao, Bravo, Boxer
Manufacturer: Pinasco · Area of application: Tuning · Material: Aluminum · Surface: varnished · Displacement: 60 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 10 mm · Nominal diameter: 42 mm · Ø cylinder neck: 45.7 mm · Ø outlet inside: 18.5 mm · Ø Outlet outside: 22.5 mm · Hole pattern [mm]: 55 x 34 · Number of fixing points: 3 pcs · Outlet type: clamped · Decompressor: Yes
EUR 402.70
Not in stock
Pinasco 42 mm cylinder kit incl. head 10 mm KoBo | Piaggio SI, Bravo, Grillo
Manufacturer: Pinasco · Material: Aluminum · Area of application: Tuning · Surface: varnished · Crankshaft stroke: 43 mm · Ø piston pin (B): 10 mm · Nominal diameter: 42 mm · Number of fixing points: 3 pcs · Outlet type: clamped · Decompressor: Yes
EUR 402.70
Not in stock
swiing® ingenious stud bolt M7x120 / Ø 7.3 shank - 10.9 strength
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Diameter: 7.3 mm · Thread type: M7x1 (standard thread) · Total length: 120 mm · Thread length: 20 mm · Thread length: 30 mm · Strength class: 10.9
EUR 4.75
EUR 6.00
Collection only possible with online purchase and appointment.
