Technical data sheet DE
Motorex Grease-Gun / grease gun for hard-to-reach areas on your moped, moped and small motorcycle.
Advantages at a glance:
- excellent grease application
- fast and clean
- robust and long-lasting
- good for dosing
Note: The grease gun is supplied without contents
The grease gun is filled with the Motorex high-pressure grease can. To do this, the tank is unscrewed and held upside down over the hole in the portioning ring of the large can. By pressing down, grease now flows into the tank of the grease gun.
The corresponding Motorex grease can for the gun as well as other oil and lubricant sprays can be found in the accessories.
Motorex – Oil of Switzerland.
| Manufacturer | Motorex |
| Area of application | Fat |
Accessories & related products
Motorex High Pressure Grease 3000 850 g
Manufacturer: Motorex · Temperature resistance (min.): -30 - 150 °C · Contents [g]: 850 g · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Area of application: Fat
EUR 24.30
EUR 28.59/kg
Motorex High Pressure Grease 3000 4.5 kg
Manufacturer: Motorex · Contents [g]: 4500 g · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Area of application: Fat · Temperature resistance (min.): -30 - 150 °C
EUR 114.60
EUR 25.47/kg
Moped fans also bought
Return spring brake plate | Puch Maxi
Spring design: Nose feather · Spring design: Torsion spring · Length spring hook: 50 mm · Leg length: 45 mm · Material: Spring steel · Surface: galvanized (blue) · Ø wire: 2.4 mm · Ø outside: 30 mm · Ø inside: 25.5 mm · Area of application: Original · Area of application: Standard · Total length: 125 mm
EUR 6.00
Magura set screw M6x34 mm lock nut SW8
Width across flats Screw: 8 mm · Manufacturer: Magura · Ø cable holder: 3.05 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø Receptacle: 7.05 mm · Thread type: M6x1 (standard thread) · Slotted: No · Total length: 34 mm · Width across flats nut: 8 mm · Thread length: 24 mm
EUR 3.05
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Surface: blank · Ø inside: 41 mm · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø outside: 45 mm · Thickness: 1.5 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3.40
Motorex High Pressure Grease 3000 850 g
Manufacturer: Motorex · Temperature resistance (min.): -30 - 150 °C · Contents [g]: 850 g · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Area of application: Fat
EUR 24.30
EUR 28.59/kg
Collection only possible with online purchase and appointment.
