Chrome-plated, adjustable dampers for your moped, moped and small motorcycle.
The hardness or preload of the dampers can be adjusted in five stages thanks to the special spring mount.
Length (mount - mount): 340 mm
Outer diameter of coil spring: 46 mm
Holt diameter: 24 mm
Bush diameter for mounting: 10 / 8 mm
With the plastic bushes supplied, the diameter at the mounting points can be shortened from 10 mm to 8 mm.
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery includes one pair.
Rear springs in other colors, the matching adjustment key, washers and fastening material can be found in the accessories section.
Suspension strut from the MKX-SHOCK brand.
| Ø outside | 46 mm |
| Manufacturer | MKX |
| Surface | chrome-plated |
| Color | Chrome |
| Damping type | Spring |
| Adjustable | Yes |
| Ø spars | 24 mm |
| Ø Fastening inside | 8 mm, 10 mm |
| Number of fixing points | 2 pcs |
| Hole spacing | 340 mm |
| Mounting type | Nuts & bolts |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 26.70
EUR 2’670.00/l
MKX shock absorber 34 cm black
Surface: varnished · Color: black · Manufacturer: MKX · Ø outside: 46 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 340 mm · Damping type: Spring · Adjustable: Yes · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm
EUR 60.90
Moped fans also bought
Not so nice 
Chrome luggage rack | Puch Maxi S
Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Nuts & bolts · Total length: 425 mm · Ø mounting hole: 8.3 mm · Ø mounting hole: 9 mm · Width: 168 mm · Wheel size [inch]: 17 " · Height: 32.5 mm · Number of fixing points: 4 pcs · Hole spacing: 29 mm
EUR 24.30
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Ø outside: 5 mm · Screw head: Lens head · Thread length: 4 mm · Total length: 6 mm
EUR 2.45
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Valve type: TR4 Auto valve · Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire height [%]: 100 · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 "
EUR 12.10
Transval speedometer drive 17" with grease nipple
Manufacturer: Transval · Material: Aluminum · Thread type: MF10x1 (fine pitch thread) · Place of use: left · Place of use: right · Color: gray · 4-edge speedometer cable: 1.8 mm · Ø outside: 41 mm · Overall width outside: 60 mm · Ø axle: 11 mm · Ø mounting hole: 11 mm · Wheel size [inch]: 17 " · Total height: 52 mm
EUR 36.50
Collection only possible with online purchase and appointment.
