High-quality, simple number plate holder made of black plastic with «mofakult» imprint for your moped / moped.
The number holder is attached to the rear mudguard or the side number holder. There are seven attachment points available for this purpose. If new holes need to be drilled into the mudguard, marking them in advance makes it easier to position them optimally.
After the license plate holder has been attached, the number plate is then fastened with two M5 screws. Extra threaded holes have been embedded in the plastic for this purpose. The use of spring washers is recommended to secure the number plate.
You can find the corresponding screws for the number frame in the accessories section.
Merchandise product of the Swiss quality brand mofakult Merch.
| Manufacturer | mofakult Merch |
| Material | Plastic |
| Color | black |
| Thread type | M5x0.8 (standard thread) |
| Thread length | 6 mm |
| Number of fixing points | 9 pcs, 2 pcs |
| Hole spacing | 50 mm |
| Height | 11 mm |
| Total length | 175 mm |
| Width | 108 mm |
| Ø mounting hole | 6 mm |
| Mounting type | Nuts & bolts |
Accessories & related products
Plastic license plate holder (CH version)
Ø mounting hole: 6 mm · Manufacturer: Made in Switzerland · Material: Brass · Material: Plastic · Color: black · Width: 108 mm · Thread type: M5x0.8 (standard thread) · Height: 11 mm · Total length: 175 mm · Mounting type: Nuts & bolts · Thread length: 6 mm · Number of fixing points: 9 pcs · Hole spacing: 50 mm
EUR 9.70
Serrated lock washer M4 - M12 galvanized
Material: Steel · Surface: galvanized (blue) · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8 · Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm
EUR 0.40
M6x22 hexagon head screw, galvanized
Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Thread type: M6x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 10 mm · Total length: 26 mm · Thread length: 22 mm · Strength class: 8.8 · Color: silver · Number of components: 1 pcs
EUR 1.35
Screw M5x10 pan-head hexagon socket, galvanized
Material: Steel · Surface: galvanized (blue) · Drive: Hexagon socket · Total length: 13 mm · Screw head: Lens head · Thread type: M5x0.8 (standard thread) · Ø External head: 9.5 mm · Width across flats SW: 3 mm · Thread length: 10 mm · Shank: No · Strength class: 10.9
EUR 1.10
Moped fans also bought
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Screw head: Lens head · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Thread length: 4 mm · Ø outside: 5 mm
EUR 2.45
Continental 2.00 - 2.50 x 16" tube
Valve type: TR6 car valve · Manufacturer: Continental · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire height [%]: 100 · Wheel size [inch]: 16 " · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5
EUR 17.80
Headlight black | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Test mark: none · Housing material: Plastic · Lens material: Plastic · Color: black · Bulb holder: P26s · Tension: 6 V · Tension: 12 V · Speedometer recording: 48 mm · Switch included: Yes · Battery operated: No · Ø External connection: 6.3 mm · Width: 125 mm · Height: 90 mm · Depth: 147 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Area of application: Original · Area of application: Standard · Piaggio OEM number: 584240
EUR 46.50
Tail light black | Piaggio Ciao PX, C24, Bravo
Manufacturer: Made in Italy · Material: Plastic · Test mark: none · Color: black · Color: red · Bulb holder: BA9s · Width: 130 mm · Depth: 43 mm · Height: 58 mm · Battery operated: No · Brake light: No · Reflectors: Yes · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 23.20
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Color: black · Quantity: 4 pcs · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm
EUR 24.40
Collection only possible with online purchase and appointment.
