Racing air filter with solid plastic housing and red foam insert.
The air filter has a centric connection, as shown in Figure 3.
Fits all Dell'Orto PHBG carburetors. Is screwed directly onto the thread of the carburetor.
Can therefore be fitted without any problems even in tight spaces.
The housing can be easily opened to clean the filter.
Ø external air filter height: 80 mm
Height air filter height: 45 mm
Ø carburettor connection: 31 mm (with thread)
Quality product from the Italian manufacturer Malossi.
| Ø outside | 80 mm |
| Height | 45 mm |
| Manufacturer | Malossi |
| Thread type | MF32x1.25 (fine pitch thread) |
| Camouflaged | No |
| Area of application | Tuning |
| Color | black |
| Filter type | Foam |
| Ø Internal connection | 31 mm |
| Mounting type | Screws |
Explore categories from Carburetor & intake system
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Color: gray · Ø bore: 4 mm · Ø Pin: 3.94 mm
EUR 15.30
Dell'Orto 19 mm PHBG CS carburetor hand choke
Nominal diameter: 19 mm · Total length: 82 mm · Height: 124 mm · Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: PHBG CS · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Width: 70 mm · Ø without reducing sleeve: 26 mm · Nozzle size: 75 · Ø Inside entrance: 19 mm · Ø Internal connection: 24 mm · Ø Output inside: 19 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Size of secondary nozzle: 45
EUR 147.00
Hot
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm
EUR 2.95
Magura adjusting screw brake short
Manufacturer: Magura · Thread type: MF6x0.75 (fine pitch thread) · Thread length: 15 mm · Total length: 31 mm · Total length: 40 mm · Material: Brass · Surface: nickel-plated · Drive: Knurled screw · Color: silver · Ø External head: 9.15 mm · Ø shaft: 6.1 mm · Shank length: 6.9 mm
EUR 4.20
Inox
Hot
Bumm mirror round Inox
Manufacturer: Bumm · Thread type: M8x1.25 (standard thread) · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Test mark: none · Surface: chrome-plated · Color: Chrome · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Clamping diameter: 22 mm · Mirror rod length: 300 mm · Thread size: M8 · Total length: 360 mm
EUR 34.20
Working late? Evening hours on Thursday until 20:00
