Revised 2021 version of one of the best cylinder kits available for Piaggio Si, Bravo 2 and 3 and Grillo mopeds / mopeds.
This is the version with 10 mm piston pin and the older version of the cylinder head.
This cast iron cylinder offers a very good increase in performance over the entire rev range and makes it one of the most popular 63 cc racing cylinders for Piaggio.
The workmanship is very clean and the matching of the piston windows to the overflow channels and boost parts is also very good. The webs in the area of the cylinder head significantly reduce the risk of piston jamming and make the cylinder extremely durable.
The cylinder head with its original look ensures good compression with its combustion chamber shape matched to the cylinder and piston.
With the reworking, the triangular shape of the cylinder head was adapted to a longitudinal shape. As a result, the cylinder fits much better on racing gear such as the Polini Speed Engine, but less well on the original gear. Fortunately, there is enough sealing surface available so that you can bring the channels back into a triangular shape on the cylinder if necessary.
The set includes the following fixed parts:
Hole pattern [mm]: 55 x 34 · Manufacturer: Malossi · Material: Gray cast iron · Surface: sandblasted · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 43 mm · Ø cylinder neck: 45.6 mm · Ø Outlet outside: 22.5 mm · Ø outlet inside: 18.3 mm · Ø piston pin (B): 10 mm · Outlet type: clamped · Number of fixing points: 3 pcs · Decompressor: Yes · Camouflaged: No · Area of application: Tuning
Hole pattern [mm]: 35 x 55 · Manufacturer: Malossi · Material: Aluminum · Ø cylinder: 41 - 43 mm · Camouflaged: No · Number of fixing points: 3 pcs · Candle thread: short · Decompressor: Yes · Total length: 134 mm · Width: 94 mm · Height: 52 mm · Area of application: Racing
Details
| Manufacturer | Malossi |
| Material | Gray cast iron |
| Area of application | Tuning |
| Surface | sandblasted |
| Displacement | 63 ccm |
| Nominal diameter | 43 mm |
| Crankshaft stroke | 43 mm |
| Ø piston pin (B) | 10 mm |
| Number of fixing points | 3 pcs |
| Outlet type | clamped |
| Decompressor | Yes |
| Camouflaged | No |
Suitable for the following models
| Piaggio | Si Bravo / Super Bravo Grillo |
Accessories & related products
SITO Plus exhaust Ø 24 mm | Piaggio SI, Grillo
Ø outside: 14 mm · Manufacturer: SITO · Material: Steel · Color: black · Surface: varnished · Total length: 720 mm · Ø Silencer: 70 mm · Number of fixing points: 1 pcs · Ø Internal connection: 22.3 mm · Ø Flame tube outside: 25 mm · Exhaust type: Cylindrical · Mounting type: Welded lug · Flame tube attachment: Plug connection clamped
EUR 97.70
Jasil crankshaft "Racing" 10 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Jasil · Material: Steel · Cheek type: standard · Area of application: Racing · Thread type: M8x1.25 (standard thread) · Ø coupling pin / vario pin: 12 mm · Crankshaft stroke: 43 mm · Thread length: 13.5 mm · Connecting rod length center-center: 87 mm · Number of gears: 1 pcs · Total length crankpin ignition side: 91.5 mm · Total length crankpin ignition side: 105 mm · Ø crank webs: 69.8 mm · Ø Connecting rod eye: 13 mm · Bearing seat right: 15 mm · Ø piston pin (B): 10 mm · Weight: 716 g · Ø Bearing seat (ignition side): 15 mm · Dimension needle bearing: 10 / 13 x 14.2 mm (axe 10) · Wide crank webs: 32.9 mm · Length 1st paragraph: 21.5 mm · Length 2nd paragraph: 44 mm · Length 3rd paragraph: 64.9 mm · Ø 1st step (on the coupling side): 15 mm · Ø 2nd shoulder (on the clutch side): 14.4 mm · Ø 3rd step (on the clutch side): 12 mm
EUR 158.90
Polini Speed Engine engine case breaker ignition | Piaggio Ciao, SI, Bravo, Boxer
Height: 104 mm · Width: 175 mm · Total length: 215 mm · Manufacturer: Polini · Material: Aluminum · Surface: sandblasted · Color: silver · Stock number: 6202 · Crankshaft stroke: 43 mm · Ignition type: Breaker
EUR 256.70
Malossi cylinder head for 41 - 43 mm cylinder kit | Piaggio SI, Bravo
Height: 52 mm · Width: 94 mm · Total length: 134 mm · Manufacturer: Malossi · Material: Aluminum · Area of application: Racing · Ø cylinder: 41 - 43 mm · Number of fixing points: 3 pcs · Candle thread: short · Hole pattern [mm]: 35 x 55 · Decompressor: Yes · Camouflaged: No
EUR 85.50
Malossi tuning set 43 mm | Piaggio SI, Bravo, Grillo
Manufacturer: Dell'Orto · Manufacturer: Malossi · Manufacturer: NGK · Manufacturer: SITO · Manufacturer: swiing · Area of application: Tuning · Crankshaft stroke: 43 mm · Displacement: 65 ccm · Nominal diameter: 44 mm · Ø piston pin (B): 10 mm · Ø piston pin (B): 12 mm · Decompressor: Yes · Outlet type: clamped · Camouflaged: No
EUR 458.50
Dell'Orto 13/13 SHA carburetor & racing air filter set | Piaggio SI, Boss, Grillo
Manufacturer: Dell'Orto · Manufacturer: Malossi · Component group Carburetor: Carburetor complete · Nominal diameter: 13 mm · Carburetor type: SHA (Piaggio) · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Total length: 55 mm · Ø without reducing sleeve: 18 mm · Width: 60 mm · Nozzle size: 66 · Ø Inside entrance: 13 mm · Ø Output inside: 13 mm · Height: 118 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 50.8 mm · Ø Internal connection: 16 mm · Area of application: Tuning
EUR 91.60
swiing® ingenious stud bolt M7x120 / Ø 7.3 shank - 10.9 strength
Manufacturer: swiing® ingenious parts · Material: Steel · Diameter: 7.3 mm · Surface: galvanized (blue) · Thread length: 20 mm · Thread length: 30 mm · Total length: 120 mm · Thread type: M7x1 (standard thread) · Strength class: 10.9
EUR 6.00
Moped fans like you also bought:
GPO license plate holder Inox
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Width: 105 mm · Color: silver · Height: 5.3 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Thread length: 8 mm · Total length: 145 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread type: M5x0.8 (standard thread)
EUR 13.30
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs
EUR 3.45
Malossi air filter | Piaggio Ciao, SI, Bravo, Boxer
Ø outside: 53.2 mm · Manufacturer: Malossi · Material: Plastic · Color: black · Area of application: Tuning · Width: 95 mm · Filter type: Foam · Total length: 31.2 mm · Height: 88.7 mm · Ø Internal connection: 51 mm · Mounting type: Plug connection clamped · Camouflaged: No
EUR 24.30
SITO Plus exhaust Ø 24 mm | Piaggio SI, Grillo
Ø outside: 14 mm · Manufacturer: SITO · Material: Steel · Color: black · Surface: varnished · Total length: 720 mm · Ø Silencer: 70 mm · Number of fixing points: 1 pcs · Ø Internal connection: 22.3 mm · Ø Flame tube outside: 25 mm · Exhaust type: Cylindrical · Mounting type: Welded lug · Flame tube attachment: Plug connection clamped
EUR 97.70
Malossi 43 mm cylinder kit 10 mm KoBo new version | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Malossi · Material: Gray cast iron · Area of application: Tuning · Surface: sandblasted · Displacement: 63 ccm · Nominal diameter: 43 mm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.6 mm · Ø Outlet outside: 22.5 mm · Ø outlet inside: 18.3 mm · Number of fixing points: 3 pcs · Ø piston pin (B): 10 mm · Outlet type: clamped · Hole pattern [mm]: 55 x 34 · Decompressor: Yes · Camouflaged: No
EUR 177.20
Malossi cylinder head for 41 - 43 mm cylinder kit | Piaggio SI, Bravo
Height: 52 mm · Width: 94 mm · Total length: 134 mm · Manufacturer: Malossi · Material: Aluminum · Area of application: Racing · Ø cylinder: 41 - 43 mm · Number of fixing points: 3 pcs · Candle thread: short · Hole pattern [mm]: 35 x 55 · Decompressor: Yes · Camouflaged: No
EUR 85.50
Dell'Orto 13/13 SHA carburetor | Piaggio SI, Boss, Grillo
Material: Aluminum · Manufacturer: Dell'Orto · Total length: 55 mm · Width: 60 mm · Height: 118 mm · Area of application: Tuning · Component group Carburetor: Carburetor complete · Nominal diameter: 13 mm · Carburetor type: SHA (Piaggio) · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 18 mm · Ø Inside entrance: 13 mm · Ø Internal connection: 16 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Mounting type: Plug connection clamped · Color: black · Camouflaged: No · Nozzle size: 66
EUR 85.50
Collection only possible with online purchase and appointment.
