profile
All wishlists Community wishlists
Carousel Image 1
Carousel Image 2
Carousel Image 3
logo_jasil

For: Puch

31229

Jasil crankshaft (+2 mm stroke) | Puch X30 NS / NL & Velux (Z50)

rating iconrating iconrating iconrating iconrating icon
No reviews
EUR 245.00

Incl. 25% VAT.

Description

Racing crankshaft with 45 mm stroke, suitable for manual Puch X30 NS / NL and thanks to the double keyway also for Puch X30 Velux Z50 engines.

When using this crankshaft, please note the following:

  • The use of a 1.0 mm thick lifting plate is essential to compensate for the additional stroke. You can find suitable plates in the accessories section. We also recommend using sealant between the seal and housing/cylinder. You can also find a suitable sealant in the accessories section.
ManufacturerJasil
MaterialSteel, Aluminum
Cheek typestandard
Crankshaft stroke45 mm
Connecting rod length center-center90 mm
Total length of crankpin on clutch side57 mm
Total length crankpin ignition side66 mm
Ø crank webs69.9 mm
Ø piston pin (B)12 mm
Ø Connecting rod eye15 mm
Thread typeMF10x1 (fine pitch thread)
Dimension needle bearing12 / 15 x 14.2 mm (axe 12)
Area of applicationTuning, Racing, Performance
Wide crank webs34 mm
Length 1st paragraph14 mm
Length 2nd paragraph15 mm
Length 3rd paragraph10 mm
Weight915 g
Puch

Z50 (X30 Sport)

Z50 (X30 Velux)

2-speed MS, MV, MV50

Accessories & related products

swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
undefined

For: Puch · Sachs

10942

swiing® ingenious puller L17 / BO15 / E15 shoulder bearing

Width across flats trigger: 8 mm · Width across flats trigger: 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Surface: galvanized (blue) · Area of application: (Dis)assembly tool · Diameter: 24 mm · Diameter: 40.3 mm · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Total length: 120 mm · Number of components: 1 pcs

EUR 53.80

Inox
Nut M10x1 Inox

For: Universal · Puch

12279

Nut M10x1 Inox

Material: Chrome steel (colloquially known as stainless steel) · Nut type: Hexagon nut · Thread type: MF10x1 (fine pitch thread) · Nominal diameter (thread): 10 mm · Drive: External hexagon

EUR 4.05

Hot Hot
swiing® revival bearing & shaft seals | Puch Z50
undefined

For: Puch

18473

swiing® revival bearing & shaft seals | Puch Z50

Manufacturer: NTN · Manufacturer: SKF · Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Area of application: Standard · Number of components: 6 pcs

EUR 79.60

GPO lifting plate 1 - 4 mm | Puch Maxi, X30 Sport, NG-2AH
undefined
angle-right

For: Puch

20668

GPO lifting plate 1 - 4 mm | Puch Maxi, X30 Sport, NG-2AH

Manufacturer: GPO · Material: Aluminum · Place of use: Cylinder base · Thickness: 1.5 mm · Thickness: 2 mm · Thickness: 2.5 mm · Thickness: 3 mm · Thickness: 4 mm

EUR 24.40

GPO lifting plate 1 - 4 mm tuning | Puch X30 Velux, X30 NG-2AH
undefined
angle-right

For: Puch

20670

GPO lifting plate 1 - 4 mm tuning | Puch X30 Velux, X30 NG-2AH

Manufacturer: GPO · Material: Aluminum · Ø cylinder: 40 - 41 mm · Place of use: Cylinder base · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm · Thickness: 2.5 mm · Thickness: 3 mm · Thickness: 4 mm

EUR 24.40

swiing® revival spacer set crankshaft L17 | Puch Z50
undefined

For: Puch

23882

swiing® revival spacer set crankshaft L17 | Puch Z50

Nominal diameter inside: 17 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled · Ø inside: 17.1 mm · Ø outside: 23.8 mm · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.25 mm · Thickness: 0.3 mm

EUR 10.90

Serrated lock washer M4 - M12 galvanized
angle-right

Universal

18469

Serrated lock washer M10 galvanized

Material: Steel · Surface: galvanized (blue) · Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8

EUR 0.40

swiing® ingenious crankshaft oil seal assembly aid | Puch X30 Sport / Velux Z50
undefined

For: Puch

26072

swiing® ingenious crankshaft oil seal assembly aid | Puch X30 Sport / Velux Z50

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Area of application: Special tool · Ø inside: 15 mm · Ø outside: 17 mm · Total length: 10 mm · Number of components: 1 pcs

EUR 15.80

Elring Dirko HT sealing compound red (silicone) high temp. 70 ml elastic up to 315°C
undefined

Universal

27782

Elring Dirko HT sealing compound red (silicone) high temp. 70 ml elastic up to 315°C

Temperature resistance (min.): -60 - 300 °C · Manufacturer: Elring · Contents: 70 ml · Area of application: Chemistry · Color: red · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Gap dimension (max.): 2 mm

EUR 28.10

EUR 401.43/l

Explore categories from Engine block

S-10-30-010_Dichtungen_Simmeringe
Seals & gaskets
S-10-30-020_Getriebe_Gehaeuse_Motor
Gearbox & housing (motor)
S-10-30-030_Kupplung
Clutch
S-10-30-040_Kurbelwelle
Crankshaft
S-10-30-050_Lager
Warehouse
S-10-30-060_Geblaese_Verschalung
Blower & shuttering
S-10-30-070_Schrauben_Muttern
Nuts & bolts
S-10-10-090_Werkzeug_Schmierstoffe
Tools & Lubricants & Accessories

Moped fans also bought

swiing® revival gasket set Z50 engine | Puch X30 NS / NL
undefined

For: Puch

10157

swiing® revival gasket set Z50 engine | Puch X30 NS / NL

Manufacturer: swiing® revival parts · Material: Sealing paper · Area of application: Standard · Ø outlet inside: 22 mm · Hole spacing inlet: 32 - 38 mm · Number of components: 10 pcs · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44

EUR 24.40

Hot Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
undefined

For: Universal · Puch · Sachs · Zündapp Belmondo · Tomos · Alpa Chopper / Turbo · DKW · ILO / JLO · Kreidler · MBK / Motobécane · Miele · Monark · Victoria · Zündapp

10173

Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing

Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm · Number of components: 1 pcs

EUR 2.95

swiing® revival plain bearing clutch basket | Puch Z50
undefined

For: Puch

10235

swiing® revival plain bearing clutch basket | Puch Z50

Nominal diameter inside: 15 mm · Manufacturer: swiing® revival parts · Material: special bearing bronze · Ø inside: 15 mm · Ø outside: 17 mm · Total height: 16.2 mm

EUR 13.40

swiing® ingenious needle roller bearing 12/15/16.2 "Racing" silver cage
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Tomos · Bye Bike · Alpa Chopper / Turbo · Cilo · DKW · Fantic · Garelli · Honda · ILO / JLO · Kreidler · Malaguti · MBK / Motobécane · Miele · Monark · Peugeot · Victoria · Yamaha

10450

swiing® ingenious needle roller bearing 12/15/16.2 "Racing" silver cage

Bearing type: Needle roller and cage assembly · Dimension needle bearing: 12/15 x 16.2 · Manufacturer: swiing® ingenious parts · Bearing cage: Silver cage · Ø inside: 12 mm · Ø outside: 15 mm · Width: 16.2 mm · Tomos OEM number: 035548

EUR 17.00

Hot Hot
swiing® revival bearing & shaft seals | Puch Z50
undefined

For: Puch

18473

swiing® revival bearing & shaft seals | Puch Z50

Manufacturer: NTN · Manufacturer: SKF · Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Area of application: Standard · Number of components: 6 pcs

EUR 79.60

- 10 %
swiing® revival engine revision set Z50 | Puch X30 Sport NS/NL
undefined

For: Puch

19315

swiing® revival engine revision set Z50 | Puch X30 Sport NS/NL

Manufacturer: NSK · Manufacturer: NTN · Manufacturer: swiing® revival parts · Area of application: Standard · Number of components: 16 pcs

EUR 100.40

EUR 90.10

Surflex clutch plate set | Puch Z50
undefined

For: Puch

22809

Surflex clutch plate set | Puch Z50

Manufacturer: Surflex · Material: Composite materials · Material: Steel · Area of application: Original · Recording type: Interlocking · Ø inside: 46.3 mm · Ø inside: 51.3 mm · Ø outside: 69.6 mm · Ø outside: 74.8 mm · Number of slats: 2 pcs · Thickness: 2.75 mm

EUR 42.80

Not in stock

swiing® revival spacer set crankshaft L17 | Puch Z50
undefined

For: Puch

23882

swiing® revival spacer set crankshaft L17 | Puch Z50

Nominal diameter inside: 17 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled · Ø inside: 17.1 mm · Ø outside: 23.8 mm · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.25 mm · Thickness: 0.3 mm

EUR 10.90

Hot Hot
swiing® revival drawbar 2-slats High End | Puch Z50
undefined

For: Puch

24299

swiing® revival drawbar 2-slats High End | Puch Z50

Manufacturer: swiing® revival parts · Material: Aluminum · Material: Steel · Surface: anodized · Surface: blackened · Area of application: High End · Color: black · Color: red · Ø outside: 44.8 mm · Total length: 35 mm

EUR 67.30